[PATCH 4.14 026/101] clk: bcm2835: Protect sections updating shared registers

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>

commit 7997f3b2df751aab0b8e60149b226a32966c41ac upstream.

CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock
handlers and must be accessed with ->regs_lock held.
Update the sections where this protection is missing.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Reviewed-by: Eric Anholt <eric@xxxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/clk/bcm/clk-bcm2835.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -653,8 +653,10 @@ static int bcm2835_pll_on(struct clk_hw
 		     ~A2W_PLL_CTRL_PWRDN);
 
 	/* Take the PLL out of reset. */
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, data->cm_ctrl_reg,
 		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+	spin_unlock(&cprman->regs_lock);
 
 	/* Wait for the PLL to lock. */
 	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
@@ -731,9 +733,11 @@ static int bcm2835_pll_set_rate(struct c
 	}
 
 	/* Unmask the reference clock from the oscillator. */
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, A2W_XOSC_CTRL,
 		     cprman_read(cprman, A2W_XOSC_CTRL) |
 		     data->reference_enable_mask);
+	spin_unlock(&cprman->regs_lock);
 
 	if (do_ana_setup_first)
 		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);