Re: [PATCH v3 5/6] dt-bindings: phy-qcom-usb2: Update bindings for sdm845
From: Manu Gautam
Date: Wed Mar 28 2018 - 03:28:08 EST
Hi,
On 3/28/2018 3:27 AM, Doug Anderson wrote:
> Hi,
>
> On Thu, Mar 22, 2018 at 11:11 PM, Manu Gautam <mgautam@xxxxxxxxxxxxxx> wrote:
>> Update compatible strings for USB2 PHYs on sdm845.
>> There are two QUSB2 PHYs present on sdm845. Few PHY registers
>> programming is different for these PHYs related to electrical
>> parameters, otherwise both are same.
>>
>> Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>> index 42c9742..b99a57f 100644
>> --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>> @@ -6,7 +6,9 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
>> Required properties:
>> - compatible: compatible list, contains
>> "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
>> - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
>> + "qcom,qusb2-v2-phy" for QUSB2 V2 PHY,
>> + "qcom,sdm845-qusb2-phy-1" for primary PHY on sdm845,
>> + "qcom,sdm845-qusb2-phy-2" for secondary PHY on sdm845.
> Similar question to the one I posed on
> <https://patchwork.kernel.org/patch/10302761/> for the QMP PHY. What
> is "qcom,qusb2-v2-phy"? Is it some ideal abstract version of the PHY?
> Do we expect that anyone would actually use that compatible string?
>
> In this case in <https://patchwork.kernel.org/patch/10302755/> it
> looks as if you're using the same settings as
> "qcom,sdm845-qusb2-phy-2", so presumably "qcom,qusb2-v2-phy" should
> just be deleted.
>
I will remove "qcom,qusb2-v2-phy".
> -Doug
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project