[PATCH v5 06/12] PCI: designware-ep: Make dw_pcie_ep_set_bar() handle 64-bit BARs properly

[Niklas Cassel]

Since a 64-bit BAR consists of a BAR pair, we need to write to both
BARs in the BAR pair to setup the BAR properly.

Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
---
 drivers/pci/dwc/pcie-designware-ep.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
index 5a0bb53c795c..571b90f88d84 100644
--- a/drivers/pci/dwc/pcie-designware-ep.c
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -138,8 +138,15 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
 		return ret;
 
 	dw_pcie_dbi_ro_wr_en(pci);
-	dw_pcie_writel_dbi2(pci, reg, size - 1);
-	dw_pcie_writel_dbi(pci, reg, flags);
+	if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+		dw_pcie_writel_dbi2(pci, reg, lower_32_bits(size - 1));
+		dw_pcie_writel_dbi(pci, reg, flags);
+		dw_pcie_writel_dbi2(pci, reg + 4, upper_32_bits(size - 1));
+		dw_pcie_writel_dbi(pci, reg + 4, 0);
+	} else {
+		dw_pcie_writel_dbi2(pci, reg, size - 1);
+		dw_pcie_writel_dbi(pci, reg, flags);
+	}
 	dw_pcie_dbi_ro_wr_dis(pci);
 
 	return 0;
-- 
2.14.2