[PATCH 2/5] drivers/soc/fsl: add EPU FSM configuration for deep sleep

From: Ran Wang
Date: Wed Mar 28 2018 - 23:56:02 EST

Next message: Ran Wang: "[PATCH 4/5] powerpc/pm: add sleep and deep sleep on QorIQ SoCs"
Previous message: Dongli Zhang: "[PATCH v2 1/1] xen-netback: process malformed sk_buff correctly to avoid BUG_ON()"
In reply to: Ran Wang: "[PATCH 1/5] powerpc/pm: Fix suspend=n in menuconfig for e500mc platforms."
Next in thread: Ran Wang: "[PATCH 4/5] powerpc/pm: add sleep and deep sleep on QorIQ SoCs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

In the last stage of deep sleep, software will trigger a Finite
State Machine (FSM) to control the hardware procedure, such a
board isolation, killing PLLs, removing power, and so on.

When the system is waked up by an interrupt, the FSM controls
the hardware to complete the early resume procedure.

This patch configure the EPU FSM preparing for deep sleep.

Signed-off-by: Hongbo Zhang <hongbo.zhang@xxxxxxxxxxxxx>
Signed-off-by: Chenhui Zhao <chenhui.zhao@xxxxxxxxxxxxx>
Signed-off-by: Ran Wang <ran.wang_1@xxxxxxx>
---
drivers/soc/fsl/Kconfig | 7 +
drivers/soc/fsl/Makefile | 1 +
drivers/soc/fsl/sleep_fsm.c | 279 +++++++++++++++++++++++++++++++++++++++++++
drivers/soc/fsl/sleep_fsm.h | 130 ++++++++++++++++++++
4 files changed, 417 insertions(+), 0 deletions(-)
create mode 100644 drivers/soc/fsl/sleep_fsm.c
create mode 100644 drivers/soc/fsl/sleep_fsm.h

diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 7a9fb9b..4222bd5 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -16,3 +16,10 @@ config FSL_GUTS
Initially only reading SVR and registering soc device are supported.
Other guts accesses, such as reading RCW, should eventually be moved
into this driver as well.
+
+config FSL_SLEEP_FSM
+ bool
+ help
+ This driver configures a hardware FSM (Finite State Machine) for deep sleep.
+ The FSM is used to finish clean-ups at the last stage of system entering deep
+ sleep, and also wakes up system when a wake up event happens.
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 44b3beb..28c38c3 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
obj-$(CONFIG_FSL_GUTS) += guts.o
+obj-$(CONFIG_FSL_SLEEP_FSM) += sleep_fsm.o
diff --git a/drivers/soc/fsl/sleep_fsm.c b/drivers/soc/fsl/sleep_fsm.c
new file mode 100644
index 0000000..378857f
--- /dev/null
+++ b/drivers/soc/fsl/sleep_fsm.c
@@ -0,0 +1,279 @@
+/*
+ * deep sleep FSM (finite-state machine) configuration
+ *
+ * Copyright 2018 NXP
+ *
+ * Author: Hongbo Zhang <hongbo.zhang@xxxxxxxxxxxxx>
+ * Chenhui Zhao <chenhui.zhao@xxxxxxxxxxxxx>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/types.h>
+
+#include "sleep_fsm.h"
+/*
+ * These values are from chip's reference manual. For example,
+ * the values for T1040 can be found in "8.4.3.8 Programming
+ * supporting deep sleep mode" of Chapter 8 "Run Control and
+ * Power Management (RCPM)".
+ * The default value can be applied to T104x, LS1021.
+ */
+struct fsm_reg_vals epu_default_val[] = {
+ /* EPGCR (Event Processor Global Control Register) */
+ {EPGCR, 0},
+ /* EPECR (Event Processor Event Control Registers) */
+ {EPECR0 + EPECR_STRIDE * 0, 0},
+ {EPECR0 + EPECR_STRIDE * 1, 0},
+ {EPECR0 + EPECR_STRIDE * 2, 0xF0004004},
+ {EPECR0 + EPECR_STRIDE * 3, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 4, 0x20000084},
+ {EPECR0 + EPECR_STRIDE * 5, 0x08000004},
+ {EPECR0 + EPECR_STRIDE * 6, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 7, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 8, 0x60000084},
+ {EPECR0 + EPECR_STRIDE * 9, 0x08000084},
+ {EPECR0 + EPECR_STRIDE * 10, 0x42000084},
+ {EPECR0 + EPECR_STRIDE * 11, 0x90000084},
+ {EPECR0 + EPECR_STRIDE * 12, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 13, 0x08000084},
+ {EPECR0 + EPECR_STRIDE * 14, 0x02000084},
+ {EPECR0 + EPECR_STRIDE * 15, 0x00000004},
+ /*
+ * EPEVTCR (Event Processor EVT Pin Control Registers)
+ * SCU8 triger EVT2, and SCU11 triger EVT9
+ */
+ {EPEVTCR0 + EPEVTCR_STRIDE * 0, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 1, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 2, 0x80000001},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 3, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 4, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 5, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 6, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 7, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 8, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 9, 0xB0000001},
+ /* EPCMPR (Event Processor Counter Compare Registers) */
+ {EPCMPR0 + EPCMPR_STRIDE * 0, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 1, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 2, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 3, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 4, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 5, 0x00000020},
+ {EPCMPR0 + EPCMPR_STRIDE * 6, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 7, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 8, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 9, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 10, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 11, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 12, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 13, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 14, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 15, 0x000000FF},
+ /* EPCCR (Event Processor Counter Control Registers) */
+ {EPCCR0 + EPCCR_STRIDE * 0, 0},
+ {EPCCR0 + EPCCR_STRIDE * 1, 0},
+ {EPCCR0 + EPCCR_STRIDE * 2, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 3, 0},
+ {EPCCR0 + EPCCR_STRIDE * 4, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 5, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 6, 0},
+ {EPCCR0 + EPCCR_STRIDE * 7, 0},
+ {EPCCR0 + EPCCR_STRIDE * 8, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 9, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 10, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 11, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 12, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 13, 0},
+ {EPCCR0 + EPCCR_STRIDE * 14, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 15, 0x92840000},
+ /* EPSMCR (Event Processor SCU Mux Control Registers) */
+ {EPSMCR0 + EPSMCR_STRIDE * 0, 0},
+ {EPSMCR0 + EPSMCR_STRIDE * 1, 0},
+ {EPSMCR0 + EPSMCR_STRIDE * 2, 0x6C700000},
+ {EPSMCR0 + EPSMCR_STRIDE * 3, 0x2F000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 4, 0x002F0000},
+ {EPSMCR0 + EPSMCR_STRIDE * 5, 0x00002E00},
+ {EPSMCR0 + EPSMCR_STRIDE * 6, 0x7C000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 7, 0x30000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 8, 0x64300000},
+ {EPSMCR0 + EPSMCR_STRIDE * 9, 0x00003000},
+ {EPSMCR0 + EPSMCR_STRIDE * 10, 0x65000030},
+ {EPSMCR0 + EPSMCR_STRIDE * 11, 0x31740000},
+ {EPSMCR0 + EPSMCR_STRIDE * 12, 0x7F000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 13, 0x00003100},
+ {EPSMCR0 + EPSMCR_STRIDE * 14, 0x00000031},
+ {EPSMCR0 + EPSMCR_STRIDE * 15, 0x76000000},
+ /* EPACR (Event Processor Action Control Registers) */
+ {EPACR0 + EPACR_STRIDE * 0, 0},
+ {EPACR0 + EPACR_STRIDE * 1, 0},
+ {EPACR0 + EPACR_STRIDE * 2, 0},
+ {EPACR0 + EPACR_STRIDE * 3, 0x00000080},
+ {EPACR0 + EPACR_STRIDE * 4, 0},
+ {EPACR0 + EPACR_STRIDE * 5, 0x00000040},
+ {EPACR0 + EPACR_STRIDE * 6, 0},
+ {EPACR0 + EPACR_STRIDE * 7, 0},
+ {EPACR0 + EPACR_STRIDE * 8, 0},
+ {EPACR0 + EPACR_STRIDE * 9, 0x0000001C},
+ {EPACR0 + EPACR_STRIDE * 10, 0x00000020},
+ {EPACR0 + EPACR_STRIDE * 11, 0},
+ {EPACR0 + EPACR_STRIDE * 12, 0x00000003},
+ {EPACR0 + EPACR_STRIDE * 13, 0x06000000},
+ {EPACR0 + EPACR_STRIDE * 14, 0x04000000},
+ {EPACR0 + EPACR_STRIDE * 15, 0x02000000},
+ /* EPIMCR (Event Processor Input Mux Control Registers) */
+ {EPIMCR0 + EPIMCR_STRIDE * 0, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 1, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 2, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 3, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 4, 0x44000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 5, 0x40000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 6, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 7, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 8, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 9, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 10, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 11, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 12, 0x44000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 13, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 14, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 15, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 16, 0x6A000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 17, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 18, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 19, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 20, 0x48000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 21, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 22, 0x6C000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 23, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 24, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 25, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 26, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 27, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 28, 0x76000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 29, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 30, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 31, 0x76000000},
+ /* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+ {EPXTRIGCR, 0x0000FFDF},
+ /* end */
+ {FSM_END_FLAG, 0},
+};
+
+struct fsm_reg_vals npc_default_val[] = {
+ /* NPC triggered Memory-Mapped Access Registers */
+ {NCR, 0x80000000},
+ {MCCR1, 0},
+ {MCSR1, 0},
+ {MMAR1LO, 0},
+ {MMAR1HI, 0},
+ {MMDR1, 0},
+ {MCSR2, 0},
+ {MMAR2LO, 0},
+ {MMAR2HI, 0},
+ {MMDR2, 0},
+ {MCSR3, 0x80000000},
+ {MMAR3LO, 0x000E2130},
+ {MMAR3HI, 0x00030000},
+ {MMDR3, 0x00020000},
+ /* end */
+ {FSM_END_FLAG, 0},
+};
+
+/**
+ * fsl_fsm_setup - Configure EPU's FSM registers
+ * @base: the base address of registers
+ * @val: Pointer to address-value pairs for FSM registers
+ */
+void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val)
+{
+ struct fsm_reg_vals *data = val;
+
+ BUG_ON(!base || !data);
+ while (data->offset != FSM_END_FLAG) {
+ iowrite32be(data->value, base + data->offset);
+ data++;
+ }
+}
+
+void fsl_epu_setup_default(void __iomem *epu_base)
+{
+ fsl_fsm_setup(epu_base, epu_default_val);
+}
+
+void fsl_npc_setup_default(void __iomem *npc_base)
+{
+ fsl_fsm_setup(npc_base, npc_default_val);
+}
+
+void fsl_epu_clean_default(void __iomem *epu_base)
+{
+ u32 offset;
+
+ /* follow the exact sequence to clear the registers */
+ /* Clear EPACRn */
+ for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+
+ /* Clear EPEVTCRn */
+ for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+
+ /* Clear EPGCR */
+ iowrite32be(0, epu_base + EPGCR);
+
+ /* Clear EPSMCRn */
+ for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+
+ /* Clear EPCCRn */
+ for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+
+ /* Clear EPCMPRn */
+ for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+
+ /* Clear EPCTRn */
+ for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+
+ /* Clear EPIMCRn */
+ for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+
+ /* Clear EPXTRIGCRn */
+ iowrite32be(0, epu_base + EPXTRIGCR);
+
+ /* Clear EPECRn */
+ for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
+ iowrite32be(0, epu_base + offset);
+}
diff --git a/drivers/soc/fsl/sleep_fsm.h b/drivers/soc/fsl/sleep_fsm.h
new file mode 100644
index 0000000..e0013c0
--- /dev/null
+++ b/drivers/soc/fsl/sleep_fsm.h
@@ -0,0 +1,130 @@
+/*
+ * deep sleep FSM (finite-state machine) configuration
+ *
+ * Copyright 2018 NXP
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_SLEEP_FSM_H
+#define _FSL_SLEEP_FSM_H
+
+#define FSL_STRIDE_4B 4
+#define FSL_STRIDE_8B 8
+
+/* End flag */
+#define FSM_END_FLAG 0xFFFFFFFFUL
+
+/* Block offsets */
+#define RCPM_BLOCK_OFFSET 0x00022000
+#define EPU_BLOCK_OFFSET 0x00000000
+#define NPC_BLOCK_OFFSET 0x00001000
+
+/* EPGCR (Event Processor Global Control Register) */
+#define EPGCR 0x000
+
+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
+#define EPEVTCR0 0x050
+#define EPEVTCR9 0x074
+#define EPEVTCR_STRIDE FSL_STRIDE_4B
+
+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+#define EPXTRIGCR 0x090
+
+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
+#define EPIMCR0 0x100
+#define EPIMCR31 0x17C
+#define EPIMCR_STRIDE FSL_STRIDE_4B
+
+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
+#define EPSMCR0 0x200
+#define EPSMCR15 0x278
+#define EPSMCR_STRIDE FSL_STRIDE_8B
+
+/* EPECR0-15 (Event Processor Event Control Registers) */
+#define EPECR0 0x300
+#define EPECR15 0x33C
+#define EPECR_STRIDE FSL_STRIDE_4B
+
+/* EPACR0-15 (Event Processor Action Control Registers) */
+#define EPACR0 0x400
+#define EPACR15 0x43C
+#define EPACR_STRIDE FSL_STRIDE_4B
+
+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
+#define EPCCR0 0x800
+#define EPCCR15 0x83C
+#define EPCCR31 0x87C
+#define EPCCR_STRIDE FSL_STRIDE_4B
+
+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
+#define EPCMPR0 0x900
+#define EPCMPR15 0x93C
+#define EPCMPR31 0x97C
+#define EPCMPR_STRIDE FSL_STRIDE_4B
+
+/* EPCTR0-31 (Event Processor Counter Register) */
+#define EPCTR0 0xA00
+#define EPCTR31 0xA7C
+#define EPCTR_STRIDE FSL_STRIDE_4B
+
+/* NPC triggered Memory-Mapped Access Registers */
+#define NCR 0x000
+#define MCCR1 0x0CC
+#define MCSR1 0x0D0
+#define MMAR1LO 0x0D4
+#define MMAR1HI 0x0D8
+#define MMDR1 0x0DC
+#define MCSR2 0x0E0
+#define MMAR2LO 0x0E4
+#define MMAR2HI 0x0E8
+#define MMDR2 0x0EC
+#define MCSR3 0x0F0
+#define MMAR3LO 0x0F4
+#define MMAR3HI 0x0F8
+#define MMDR3 0x0FC
+
+/* RCPM Core State Action Control Register 0 */
+#define CSTTACR0 0xB00
+
+/* RCPM Core Group 1 Configuration Register 0 */
+#define CG1CR0 0x31C
+
+struct fsm_reg_vals {
+ u32 offset;
+ u32 value;
+};
+
+void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val);
+void fsl_epu_setup_default(void __iomem *epu_base);
+void fsl_npc_setup_default(void __iomem *npc_base);
+void fsl_epu_clean_default(void __iomem *epu_base);
+
+#endif /* _FSL_SLEEP_FSM_H */
--
1.7.1

Next message: Ran Wang: "[PATCH 4/5] powerpc/pm: add sleep and deep sleep on QorIQ SoCs"
Previous message: Dongli Zhang: "[PATCH v2 1/1] xen-netback: process malformed sk_buff correctly to avoid BUG_ON()"
In reply to: Ran Wang: "[PATCH 1/5] powerpc/pm: Fix suspend=n in menuconfig for e500mc platforms."
Next in thread: Ran Wang: "[PATCH 4/5] powerpc/pm: add sleep and deep sleep on QorIQ SoCs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]