[PATCH v7 0/4] Bluetooth: hci_qca: Add serdev support

[Thierry Escande]

Hi,

This patchset enables the Qualcomm BT controller QCA6174 node in the
device tree of the db820c board. This allows the bluetooth chipset to
be probed and registered against the hci layer by using the serdev
framework.

This patchset also contains the documentation for the compatible
string "qcom,qca6174-bt" related to this chipset.

v7:
- Add a new patch enabling regulators and gpios for the bt/wlan
  combo chip

v6:
- Move pinctrl properties into subnodes
- fix binding documentation

v5:
- Rename 'bt-disable-n' gpio as 'enable'

v4:
- Fix dt binding documentation
- Address some other issues in patch #3

v3:
- Address comments for patch #3 (details in patch)

v2:
- Fix author email


Srinivas Kandagatla (1):
  arm64: dts: apq8096-db820c: Enable wlan and bt en pins

Thierry Escande (3):
  arm64: dts: apq8096-db820c: enable bluetooth node
  dt-bindings: net: bluetooth: Add qualcomm-bluetooth
  Bluetooth: hci_qca: Add serdev support

 .../devicetree/bindings/net/qualcomm-bluetooth.txt |  30 ++++++
 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi  |  26 +++++
 .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi    |  32 ++++++
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi       |  62 ++++++++++++
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |  10 ++
 drivers/bluetooth/Kconfig                          |   1 +
 drivers/bluetooth/hci_qca.c                        | 109 ++++++++++++++++++++-
 7 files changed, 268 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt

-- 
2.14.1