[PATCH v5 11/14] cxgb4: Report PCIe link properties with pcie_print_link_status()
From: Bjorn Helgaas
Date: Fri Mar 30 2018 - 17:06:12 EST
From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Use pcie_print_link_status() to report PCIe link speed and possible
limitations instead of implementing this in the driver itself.
Note that pcie_get_minimum_link() can return misleading information because
it finds the slowest link and the narrowest link without considering the
total bandwidth of the link. If the path contains a 16 GT/s x1 link and a
2.5 GT/s x16 link, pcie_get_minimum_link() returns 2.5 GT/s x1, which
corresponds to 250 MB/s of bandwidth, not the actual available bandwidth of
about 2000 MB/s for a 16 GT/s x1 link.
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 75 -----------------------
1 file changed, 1 insertion(+), 74 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 56bc626ef006..2d6864c8199e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -4762,79 +4762,6 @@ static int init_rss(struct adapter *adap)
return 0;
}
-static int cxgb4_get_pcie_dev_link_caps(struct adapter *adap,
- enum pci_bus_speed *speed,
- enum pcie_link_width *width)
-{
- u32 lnkcap1, lnkcap2;
- int err1, err2;
-
-#define PCIE_MLW_CAP_SHIFT 4 /* start of MLW mask in link capabilities */
-
- *speed = PCI_SPEED_UNKNOWN;
- *width = PCIE_LNK_WIDTH_UNKNOWN;
-
- err1 = pcie_capability_read_dword(adap->pdev, PCI_EXP_LNKCAP,
- &lnkcap1);
- err2 = pcie_capability_read_dword(adap->pdev, PCI_EXP_LNKCAP2,
- &lnkcap2);
- if (!err2 && lnkcap2) { /* PCIe r3.0-compliant */
- if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_8_0GB)
- *speed = PCIE_SPEED_8_0GT;
- else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_5_0GB)
- *speed = PCIE_SPEED_5_0GT;
- else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_2_5GB)
- *speed = PCIE_SPEED_2_5GT;
- }
- if (!err1) {
- *width = (lnkcap1 & PCI_EXP_LNKCAP_MLW) >> PCIE_MLW_CAP_SHIFT;
- if (!lnkcap2) { /* pre-r3.0 */
- if (lnkcap1 & PCI_EXP_LNKCAP_SLS_5_0GB)
- *speed = PCIE_SPEED_5_0GT;
- else if (lnkcap1 & PCI_EXP_LNKCAP_SLS_2_5GB)
- *speed = PCIE_SPEED_2_5GT;
- }
- }
-
- if (*speed == PCI_SPEED_UNKNOWN || *width == PCIE_LNK_WIDTH_UNKNOWN)
- return err1 ? err1 : err2 ? err2 : -EINVAL;
- return 0;
-}
-
-static void cxgb4_check_pcie_caps(struct adapter *adap)
-{
- enum pcie_link_width width, width_cap;
- enum pci_bus_speed speed, speed_cap;
-
-#define PCIE_SPEED_STR(speed) \
- (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" : \
- speed == PCIE_SPEED_5_0GT ? "5.0GT/s" : \
- speed == PCIE_SPEED_2_5GT ? "2.5GT/s" : \
- "Unknown")
-
- if (cxgb4_get_pcie_dev_link_caps(adap, &speed_cap, &width_cap)) {
- dev_warn(adap->pdev_dev,
- "Unable to determine PCIe device BW capabilities\n");
- return;
- }
-
- if (pcie_get_minimum_link(adap->pdev, &speed, &width) ||
- speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) {
- dev_warn(adap->pdev_dev,
- "Unable to determine PCI Express bandwidth.\n");
- return;
- }
-
- dev_info(adap->pdev_dev, "PCIe link speed is %s, device supports %s\n",
- PCIE_SPEED_STR(speed), PCIE_SPEED_STR(speed_cap));
- dev_info(adap->pdev_dev, "PCIe link width is x%d, device supports x%d\n",
- width, width_cap);
- if (speed < speed_cap || width < width_cap)
- dev_info(adap->pdev_dev,
- "A slot with more lanes and/or higher speed is "
- "suggested for optimal performance.\n");
-}
-
/* Dump basic information about the adapter */
static void print_adapter_info(struct adapter *adapter)
{
@@ -5466,7 +5393,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
/* check for PCI Express bandwidth capabiltites */
- cxgb4_check_pcie_caps(adapter);
+ pcie_print_link_status(pdev);
err = init_rss(adapter);
if (err)