Re: [PATCH 1/2] perf: riscv: preliminary RISC-V support

From: Alan Kao
Date: Mon Apr 02 2018 - 03:36:28 EST


On Sat, Mar 31, 2018 at 03:47:10PM -0700, Alex Solomatnikov wrote:

The original guess was that maybe, an counter value on a hart is picked
as the minusend, and an old counter value on another hart was recorded
as the subtrahend but numerically larger. Then, the overflow causes
by that subtraction. Please let me name this guess as
"cross-hart subtraction."

> You can add a skew between cores in qemu, something like this:
>
> case CSR_INSTRET:
> core_id()*return cpu_get_host_ticks()/10;
> break;
> case CSR_CYCLE:
> return cpu_get_host_ticks();
> break;
>

However, I tried similar stuff to reproduce the phenomenon but in vain.
It seems that the cross-hart subtration doesn't even happen, because generic
code handles them. While I am still looking for the proof to it, I would
like to have more information on this first:

* What is the frequency of that "funny number" event? Was that often?

* If you monitor only one hart, will the event disappear?

* What will happen if you change the counter_width to fit U54's counter width?

* Is the test program you used open-sourced?

> Alex
>

Many thanks,
Alan

> On Wed, Mar 28, 2018 at 7:30 PM, Alan Kao <alankao@xxxxxxxxxxxxx> wrote:
> > Hi Alex,
> >
> > I'm appreciated for your reply and tests.
> >
> > On Wed, Mar 28, 2018 at 03:58:41PM -0700, Alex Solomatnikov wrote:
> >> Did you test this code?
> >
> > I did test this patch on QEMU's virt model with multi-hart, which is the only
> > RISC-V machine I have for now. But as I mentioned in
> > https://github.com/riscv/riscv-qemu/pull/115 , the hardware counter support
> > in QEMU is not fully conformed to the 1.10 Priv-Spec, so I had to slightly
> > tweak the code to make reading work.
> >
> > Specifically, the read to cycle and instret in QEMU looks like this:
> > ...
> > case CSR_INSTRET:
> > case CSR_CYCLE:
> > // if (ctr_ok) {
> > return cpu_get_host_ticks();
> > // }
> > break;
> > ...
> > and the two lines of comment was the tweak.
> >
> > On such environment, I did not get anything unexpected. No matter which of them
> > is requested, QEMU returns the host's tick.
> >
> >>
> >> I got funny numbers when I tried to run it on HiFive Unleashed:
> >>
> >> perf stat mem-latency
> >> ...
> >>
> >> Performance counter stats for 'mem-latency':
> >>
> >> 157.907000 task-clock (msec) # 0.940 CPUs utilized
> >>
> >> 1 context-switches # 0.006 K/sec
> >>
> >> 1 cpu-migrations # 0.006 K/sec
> >>
> >> 4102 page-faults # 0.026 M/sec
> >>
> >> 157923752 cycles # 1.000 GHz
> >>
> >> 9223372034948899840 instructions # 58403957087.78 insn
> >> per cycle
> >> <not supported> branches
> >>
> >> <not supported> branch-misses
> >>
> >>
> >> 0.168046000 seconds time elapsed
> >>
> >>
> >> Tracing read_counter(), I see this:
> >>
> >> Jan 1 00:41:50 buildroot user.info kernel: [ 2510.058809] CPU 3:
> >> read_counter idx=0 val=2528358954912
> >> Jan 1 00:41:50 buildroot user.info kernel: [ 2510.063339] CPU 3:
> >> read_counter idx=1 val=53892244920
> >> Jan 1 00:41:50 buildroot user.info kernel: [ 2510.118160] CPU 3:
> >> read_counter idx=0 val=2528418303035
> >> Jan 1 00:41:50 buildroot user.info kernel: [ 2510.122694] CPU 3:
> >> read_counter idx=1 val=53906699665
> >> Jan 1 00:41:50 buildroot user.info kernel: [ 2510.216736] CPU 1:
> >> read_counter idx=0 val=2528516878664
> >> Jan 1 00:41:50 buildroot user.info kernel: [ 2510.221270] CPU 1:
> >> read_counter idx=1 val=51986369142
> >>
> >> It looks like the counter values from different cores are subtracted and
> >> wraparound occurs.
> >>
> >
> > Thanks for the hint. It makes sense. 9223372034948899840 is 7fffffff8e66a400,
> > which should be a wraparound with the mask I set (63-bit) in the code.
> >
> > I will try this direction. Ideally, we can solve it by explicitly syncing the
> > hwc->prev_count when a cpu migration event happens.
> >
> >>
> >> Also, core IDs and socket IDs are wrong in perf report:
> >>
> >
> > As Palmer has replied to this, I have no comment here.
> >
> >> perf report --header -I
> >> Error:
> >> The perf.data file has no samples!
> >> # ========
> >> # captured on: Thu Jan 1 02:52:07 1970
> >> # hostname : buildroot
> >> # os release : 4.15.0-00045-g0d7c030-dirty
> >> # perf version : 4.15.0
> >> # arch : riscv64
> >> # nrcpus online : 4
> >> # nrcpus avail : 5
> >> # total memory : 8188340 kB
> >> # cmdline : /usr/bin/perf record -F 1000 lat_mem_rd -P 1 -W 1 -N 1 -t 10
> >> # event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } =
> >> 1000, sample_type = IP|TID|TIME|PERIOD, disabled = 1, inherit = 1, mmap =
> >> 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3,
> >> sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1
> >> # sibling cores : 1
> >> # sibling cores : 2
> >> # sibling cores : 3
> >> # sibling cores : 4
> >> # sibling threads : 1
> >> # sibling threads : 2
> >> # sibling threads : 3
> >> # sibling threads : 4
> >> # CPU 0: Core ID -1, Socket ID -1
> >> # CPU 1: Core ID 0, Socket ID -1
> >> # CPU 2: Core ID 0, Socket ID -1
> >> # CPU 3: Core ID 0, Socket ID -1
> >> # CPU 4: Core ID 0, Socket ID -1
> >> # pmu mappings: cpu = 4, software = 1
> >> # CPU cache info:
> >> # L1 Instruction 32K [1]
> >> # L1 Data 32K [1]
> >> # L1 Instruction 32K [2]
> >> # L1 Data 32K [2]
> >> # L1 Instruction 32K [3]
> >> # L1 Data 32K [3]
> >> # missing features: TRACING_DATA BUILD_ID CPUDESC CPUID NUMA_TOPOLOGY
> >> BRANCH_STACK GROUP_DESC AUXTRACE STAT
> >> # ========
> >>
> >>
> >> Alex
> >>
> >
> > Many thanks,
> > Alan
> >
> >> On Mon, Mar 26, 2018 at 12:57 AM, Alan Kao <alankao@xxxxxxxxxxxxx> wrote:
> >>
> >> > This patch provide a basic PMU, riscv_base_pmu, which supports two
> >> > general hardware event, instructions and cycles. Furthermore, this
> >> > PMU serves as a reference implementation to ease the portings in
> >> > the future.
> >> >
> >> > riscv_base_pmu should be able to run on any RISC-V machine that
> >> > conforms to the Priv-Spec. Note that the latest qemu model hasn't
> >> > fully support a proper behavior of Priv-Spec 1.10 yet, but work
> >> > around should be easy with very small fixes. Please check
> >> > https://github.com/riscv/riscv-qemu/pull/115 for future updates.
> >> >
> >> > Cc: Nick Hu <nickhu@xxxxxxxxxxxxx>
> >> > Cc: Greentime Hu <greentime@xxxxxxxxxxxxx>
> >> > Signed-off-by: Alan Kao <alankao@xxxxxxxxxxxxx>
> >> > ---
> >> > arch/riscv/Kconfig | 12 +
> >> > arch/riscv/include/asm/perf_event.h | 76 +++++-
> >> > arch/riscv/kernel/Makefile | 1 +
> >> > arch/riscv/kernel/perf_event.c | 469 ++++++++++++++++++++++++++++++
> >> > ++++++
> >> > 4 files changed, 554 insertions(+), 4 deletions(-)
> >> > create mode 100644 arch/riscv/kernel/perf_event.c
> >> >
> >> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >> > index 310b9a5d6737..dd4aecfb5265 100644
> >> > --- a/arch/riscv/Kconfig
> >> > +++ b/arch/riscv/Kconfig
> >> > @@ -195,6 +195,18 @@ config RISCV_ISA_C
> >> > config RISCV_ISA_A
> >> > def_bool y
> >> >
> >> > +menu "PMU type"
> >> > + depends on PERF_EVENTS
> >> > +
> >> > +config RISCV_BASE_PMU
> >> > + bool "Base Performance Monitoring Unit"
> >> > + def_bool y
> >> > + help
> >> > + A base PMU that serves as a reference implementation and has
> >> > limited
> >> > + feature of perf.
> >> > +
> >> > +endmenu
> >> > +
> >> > endmenu
> >> >
> >> > menu "Kernel type"
> >> > diff --git a/arch/riscv/include/asm/perf_event.h
> >> > b/arch/riscv/include/asm/perf_event.h
> >> > index e13d2ff29e83..98e2efb02d25 100644
> >> > --- a/arch/riscv/include/asm/perf_event.h
> >> > +++ b/arch/riscv/include/asm/perf_event.h
> >> > @@ -1,13 +1,81 @@
> >> > +/* SPDX-License-Identifier: GPL-2.0 */
> >> > /*
> >> > * Copyright (C) 2018 SiFive
> >> > + * Copyright (C) 2018 Andes Technology Corporation
> >> > *
> >> > - * This program is free software; you can redistribute it and/or
> >> > - * modify it under the terms of the GNU General Public Licence
> >> > - * as published by the Free Software Foundation; either version
> >> > - * 2 of the Licence, or (at your option) any later version.
> >> > */
> >> >
> >> > #ifndef _ASM_RISCV_PERF_EVENT_H
> >> > #define _ASM_RISCV_PERF_EVENT_H
> >> >
> >> > +#include <linux/perf_event.h>
> >> > +#include <linux/ptrace.h>
> >> > +
> >> > +#define RISCV_BASE_COUNTERS 2
> >> > +
> >> > +/*
> >> > + * The RISCV_MAX_COUNTERS parameter should be specified.
> >> > + */
> >> > +
> >> > +#ifdef CONFIG_RISCV_BASE_PMU
> >> > +#define RISCV_MAX_COUNTERS 2
> >> > +#endif
> >> > +
> >> > +#ifndef RISCV_MAX_COUNTERS
> >> > +#error "Please provide a valid RISCV_MAX_COUNTERS for the PMU."
> >> > +#endif
> >> > +
> >> > +/*
> >> > + * These are the indexes of bits in counteren register *minus* 1,
> >> > + * except for cycle. It would be coherent if it can directly mapped
> >> > + * to counteren bit definition, but there is a *time* register at
> >> > + * counteren[1]. Per-cpu structure is scarce resource here.
> >> > + *
> >> > + * According to the spec, an implementation can support counter up to
> >> > + * mhpmcounter31, but many high-end processors has at most 6 general
> >> > + * PMCs, we give the definition to MHPMCOUNTER8 here.
> >> > + */
> >> > +#define RISCV_PMU_CYCLE 0
> >> > +#define RISCV_PMU_INSTRET 1
> >> > +#define RISCV_PMU_MHPMCOUNTER3 2
> >> > +#define RISCV_PMU_MHPMCOUNTER4 3
> >> > +#define RISCV_PMU_MHPMCOUNTER5 4
> >> > +#define RISCV_PMU_MHPMCOUNTER6 5
> >> > +#define RISCV_PMU_MHPMCOUNTER7 6
> >> > +#define RISCV_PMU_MHPMCOUNTER8 7
> >> > +
> >> > +#define RISCV_OP_UNSUPP (-EOPNOTSUPP)
> >> > +
> >> > +struct cpu_hw_events {
> >> > + /* # currently enabled events*/
> >> > + int n_events;
> >> > + /* currently enabled events */
> >> > + struct perf_event *events[RISCV_MAX_COUNTERS];
> >> > + /* vendor-defined PMU data */
> >> > + void *platform;
> >> > +};
> >> > +
> >> > +struct riscv_pmu {
> >> > + struct pmu *pmu;
> >> > +
> >> > + /* generic hw/cache events table */
> >> > + const int *hw_events;
> >> > + const int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
> >> > + [PERF_COUNT_HW_CACHE_OP_MAX]
> >> > + [PERF_COUNT_HW_CACHE_RESULT_MAX];
> >> > + /* method used to map hw/cache events */
> >> > + int (*map_hw_event)(u64 config);
> >> > + int (*map_cache_event)(u64 config);
> >> > +
> >> > + /* max generic hw events in map */
> >> > + int max_events;
> >> > + /* number total counters, 2(base) + x(general) */
> >> > + int num_counters;
> >> > + /* the width of the counter */
> >> > + int counter_width;
> >> > +
> >> > + /* vendor-defined PMU features */
> >> > + void *platform;
> >> > +};
> >> > +
> >> > #endif /* _ASM_RISCV_PERF_EVENT_H */
> >> > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> >> > index 196f62ffc428..849c38d9105f 100644
> >> > --- a/arch/riscv/kernel/Makefile
> >> > +++ b/arch/riscv/kernel/Makefile
> >> > @@ -36,5 +36,6 @@ obj-$(CONFIG_SMP) += smp.o
> >> > obj-$(CONFIG_MODULES) += module.o
> >> > obj-$(CONFIG_FUNCTION_TRACER) += mcount.o
> >> > obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
> >> > +obj-$(CONFIG_PERF_EVENTS) += perf_event.o
> >> >
> >> > clean:
> >> > diff --git a/arch/riscv/kernel/perf_event.c b/arch/riscv/kernel/perf_
> >> > event.c
> >> > new file mode 100644
> >> > index 000000000000..b78cb486683b
> >> > --- /dev/null
> >> > +++ b/arch/riscv/kernel/perf_event.c
> >> > @@ -0,0 +1,469 @@
> >> > +/* SPDX-License-Identifier: GPL-2.0 */
> >> > +/*
> >> > + * Copyright (C) 2008 Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> >> > + * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
> >> > + * Copyright (C) 2009 Jaswinder Singh Rajput
> >> > + * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
> >> > + * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
> >> > + * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@xxxxxxxxx>
> >> > + * Copyright (C) 2009 Google, Inc., Stephane Eranian
> >> > + * Copyright 2014 Tilera Corporation. All Rights Reserved.
> >> > + * Copyright (C) 2018 Andes Technology Corporation
> >> > + *
> >> > + * Perf_events support for RISC-V platforms.
> >> > + *
> >> > + * Since the spec. (as of now, Priv-Spec 1.10) does not provide enough
> >> > + * functionality for perf event to fully work, this file provides
> >> > + * the very basic framework only.
> >> > + *
> >> > + * For platform portings, please check Documentations/riscv/pmu.txt.
> >> > + *
> >> > + * The Copyright line includes x86 and tile ones.
> >> > + */
> >> > +
> >> > +#include <linux/kprobes.h>
> >> > +#include <linux/kernel.h>
> >> > +#include <linux/kdebug.h>
> >> > +#include <linux/mutex.h>
> >> > +#include <linux/bitmap.h>
> >> > +#include <linux/irq.h>
> >> > +#include <linux/interrupt.h>
> >> > +#include <linux/perf_event.h>
> >> > +#include <linux/atomic.h>
> >> > +#include <asm/perf_event.h>
> >> > +
> >> > +static const struct riscv_pmu *riscv_pmu __read_mostly;
> >> > +static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
> >> > +
> >> > +/*
> >> > + * Hardware & cache maps and their methods
> >> > + */
> >> > +
> >> > +static const int riscv_hw_event_map[] = {
> >> > + [PERF_COUNT_HW_CPU_CYCLES] = RISCV_PMU_CYCLE,
> >> > + [PERF_COUNT_HW_INSTRUCTIONS] = RISCV_PMU_INSTRET,
> >> > + [PERF_COUNT_HW_CACHE_REFERENCES] = RISCV_OP_UNSUPP,
> >> > + [PERF_COUNT_HW_CACHE_MISSES] = RISCV_OP_UNSUPP,
> >> > + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = RISCV_OP_UNSUPP,
> >> > + [PERF_COUNT_HW_BRANCH_MISSES] = RISCV_OP_UNSUPP,
> >> > + [PERF_COUNT_HW_BUS_CYCLES] = RISCV_OP_UNSUPP,
> >> > +};
> >> > +
> >> > +#define C(x) PERF_COUNT_HW_CACHE_##x
> >> > +static const int riscv_cache_event_map[PERF_COUNT_HW_CACHE_MAX]
> >> > +[PERF_COUNT_HW_CACHE_OP_MAX]
> >> > +[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
> >> > + [C(L1D)] = {
> >> > + [C(OP_READ)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_WRITE)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_PREFETCH)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + },
> >> > + [C(L1I)] = {
> >> > + [C(OP_READ)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_WRITE)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_PREFETCH)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + },
> >> > + [C(LL)] = {
> >> > + [C(OP_READ)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_WRITE)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_PREFETCH)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + },
> >> > + [C(DTLB)] = {
> >> > + [C(OP_READ)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_WRITE)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_PREFETCH)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + },
> >> > + [C(ITLB)] = {
> >> > + [C(OP_READ)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_WRITE)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_PREFETCH)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + },
> >> > + [C(BPU)] = {
> >> > + [C(OP_READ)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_WRITE)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + [C(OP_PREFETCH)] = {
> >> > + [C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
> >> > + [C(RESULT_MISS)] = RISCV_OP_UNSUPP,
> >> > + },
> >> > + },
> >> > +};
> >> > +
> >> > +static int riscv_map_hw_event(u64 config)
> >> > +{
> >> > + if (config >= riscv_pmu->max_events)
> >> > + return -EINVAL;
> >> > +
> >> > + return riscv_pmu->hw_events[config];
> >> > +}
> >> > +
> >> > +int riscv_map_cache_decode(u64 config, unsigned int *type,
> >> > + unsigned int *op, unsigned int *result)
> >> > +{
> >> > + return -ENOENT;
> >> > +}
> >> > +
> >> > +static int riscv_map_cache_event(u64 config)
> >> > +{
> >> > + unsigned int type, op, result;
> >> > + int err = -ENOENT;
> >> > + int code;
> >> > +
> >> > + err = riscv_map_cache_decode(config, &type, &op, &result);
> >> > + if (!riscv_pmu->cache_events || err)
> >> > + return err;
> >> > +
> >> > + if (type >= PERF_COUNT_HW_CACHE_MAX ||
> >> > + op >= PERF_COUNT_HW_CACHE_OP_MAX ||
> >> > + result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
> >> > + return -EINVAL;
> >> > +
> >> > + code = (*riscv_pmu->cache_events)[type][op][result];
> >> > + if (code == RISCV_OP_UNSUPP)
> >> > + return -EINVAL;
> >> > +
> >> > + return code;
> >> > +}
> >> > +
> >> > +/*
> >> > + * Low-level functions: reading/writing counters
> >> > + */
> >> > +
> >> > +static inline u64 read_counter(int idx)
> >> > +{
> >> > + u64 val = 0;
> >> > +
> >> > + switch (idx) {
> >> > + case RISCV_PMU_CYCLE:
> >> > + val = csr_read(cycle);
> >> > + break;
> >> > + case RISCV_PMU_INSTRET:
> >> > + val = csr_read(instret);
> >> > + break;
> >> > + default:
> >> > + WARN_ON_ONCE(idx < 0 || idx > RISCV_MAX_COUNTERS);
> >> > + return -EINVAL;
> >> > + }
> >> > +
> >> > + return val;
> >> > +}
> >> > +
> >> > +static inline void write_counter(int idx, u64 value)
> >> > +{
> >> > + /* currently not supported */
> >> > +}
> >> > +
> >> > +/*
> >> > + * pmu->read: read and update the counter
> >> > + *
> >> > + * Other architectures' implementation often have a xxx_perf_event_update
> >> > + * routine, which can return counter values when called in the IRQ, but
> >> > + * return void when being called by the pmu->read method.
> >> > + */
> >> > +static void riscv_pmu_read(struct perf_event *event)
> >> > +{
> >> > + struct hw_perf_event *hwc = &event->hw;
> >> > + u64 prev_raw_count, new_raw_count;
> >> > + u64 oldval;
> >> > + int idx = hwc->idx;
> >> > + u64 delta;
> >> > +
> >> > + do {
> >> > + prev_raw_count = local64_read(&hwc->prev_count);
> >> > + new_raw_count = read_counter(idx);
> >> > +
> >> > + oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count,
> >> > + new_raw_count);
> >> > + } while (oldval != prev_raw_count);
> >> > +
> >> > + /*
> >> > + * delta is the value to update the counter we maintain in the
> >> > kernel.
> >> > + */
> >> > + delta = (new_raw_count - prev_raw_count) &
> >> > + ((1ULL << riscv_pmu->counter_width) - 1);
> >> > + local64_add(delta, &event->count);
> >> > + /*
> >> > + * Something like local64_sub(delta, &hwc->period_left) here is
> >> > + * needed if there is an interrupt for perf.
> >> > + */
> >> > +}
> >> > +
> >> > +/*
> >> > + * State transition functions:
> >> > + *
> >> > + * stop()/start() & add()/del()
> >> > + */
> >> > +
> >> > +/*
> >> > + * pmu->stop: stop the counter
> >> > + */
> >> > +static void riscv_pmu_stop(struct perf_event *event, int flags)
> >> > +{
> >> > + struct hw_perf_event *hwc = &event->hw;
> >> > +
> >> > + WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
> >> > + hwc->state |= PERF_HES_STOPPED;
> >> > +
> >> > + if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE))
> >> > {
> >> > + riscv_pmu_read(event);
> >> > + hwc->state |= PERF_HES_UPTODATE;
> >> > + }
> >> > +}
> >> > +
> >> > +/*
> >> > + * pmu->start: start the event.
> >> > + */
> >> > +static void riscv_pmu_start(struct perf_event *event, int flags)
> >> > +{
> >> > + struct hw_perf_event *hwc = &event->hw;
> >> > +
> >> > + if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
> >> > + return;
> >> > +
> >> > + if (flags & PERF_EF_RELOAD) {
> >> > + WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
> >> > +
> >> > + /*
> >> > + * Set the counter to the period to the next interrupt
> >> > here,
> >> > + * if you have any.
> >> > + */
> >> > + }
> >> > +
> >> > + hwc->state = 0;
> >> > + perf_event_update_userpage(event);
> >> > +
> >> > + /*
> >> > + * Since we cannot write to counters, this serves as an
> >> > initialization
> >> > + * to the delta-mechanism in pmu->read(); otherwise, the delta
> >> > would be
> >> > + * wrong when pmu->read is called for the first time.
> >> > + */
> >> > + if (local64_read(&hwc->prev_count) == 0)
> >> > + local64_set(&hwc->prev_count, read_counter(hwc->idx));
> >> > +}
> >> > +
> >> > +/*
> >> > + * pmu->add: add the event to PMU.
> >> > + */
> >> > +static int riscv_pmu_add(struct perf_event *event, int flags)
> >> > +{
> >> > + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
> >> > + struct hw_perf_event *hwc = &event->hw;
> >> > +
> >> > + if (cpuc->n_events == riscv_pmu->num_counters)
> >> > + return -ENOSPC;
> >> > +
> >> > + /*
> >> > + * We don't have general conunters, so no binding-event-to-counter
> >> > + * process here.
> >> > + *
> >> > + * Indexing using hwc->config generally not works, since config may
> >> > + * contain extra information, but here the only info we have in
> >> > + * hwc->config is the event index.
> >> > + */
> >> > + hwc->idx = hwc->config;
> >> > + cpuc->events[hwc->idx] = event;
> >> > + cpuc->n_events++;
> >> > +
> >> > + hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
> >> > +
> >> > + if (flags & PERF_EF_START)
> >> > + riscv_pmu_start(event, PERF_EF_RELOAD);
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > +/*
> >> > + * pmu->del: delete the event from PMU.
> >> > + */
> >> > +static void riscv_pmu_del(struct perf_event *event, int flags)
> >> > +{
> >> > + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
> >> > + struct hw_perf_event *hwc = &event->hw;
> >> > +
> >> > + cpuc->events[hwc->idx] = NULL;
> >> > + cpuc->n_events--;
> >> > + riscv_pmu_stop(event, PERF_EF_UPDATE);
> >> > + perf_event_update_userpage(event);
> >> > +}
> >> > +
> >> > +/*
> >> > + * Interrupt
> >> > + */
> >> > +
> >> > +static DEFINE_MUTEX(pmc_reserve_mutex);
> >> > +typedef void (*perf_irq_t)(void *riscv_perf_irq);
> >> > +perf_irq_t perf_irq;
> >> > +
> >> > +void riscv_pmu_handle_irq(void *riscv_perf_irq)
> >> > +{
> >> > +}
> >> > +
> >> > +static perf_irq_t reserve_pmc_hardware(void)
> >> > +{
> >> > + perf_irq_t old;
> >> > +
> >> > + mutex_lock(&pmc_reserve_mutex);
> >> > + old = perf_irq;
> >> > + perf_irq = &riscv_pmu_handle_irq;
> >> > + mutex_unlock(&pmc_reserve_mutex);
> >> > +
> >> > + return old;
> >> > +}
> >> > +
> >> > +void release_pmc_hardware(void)
> >> > +{
> >> > + mutex_lock(&pmc_reserve_mutex);
> >> > + perf_irq = NULL;
> >> > + mutex_unlock(&pmc_reserve_mutex);
> >> > +}
> >> > +
> >> > +/*
> >> > + * Event Initialization
> >> > + */
> >> > +
> >> > +static atomic_t riscv_active_events;
> >> > +
> >> > +static void riscv_event_destroy(struct perf_event *event)
> >> > +{
> >> > + if (atomic_dec_return(&riscv_active_events) == 0)
> >> > + release_pmc_hardware();
> >> > +}
> >> > +
> >> > +static int riscv_event_init(struct perf_event *event)
> >> > +{
> >> > + struct perf_event_attr *attr = &event->attr;
> >> > + struct hw_perf_event *hwc = &event->hw;
> >> > + perf_irq_t old_irq_handler = NULL;
> >> > + int code;
> >> > +
> >> > + if (atomic_inc_return(&riscv_active_events) == 1)
> >> > + old_irq_handler = reserve_pmc_hardware();
> >> > +
> >> > + if (old_irq_handler) {
> >> > + pr_warn("PMC hardware busy (reserved by oprofile)\n");
> >> > + atomic_dec(&riscv_active_events);
> >> > + return -EBUSY;
> >> > + }
> >> > +
> >> > + switch (event->attr.type) {
> >> > + case PERF_TYPE_HARDWARE:
> >> > + code = riscv_pmu->map_hw_event(attr->config);
> >> > + break;
> >> > + case PERF_TYPE_HW_CACHE:
> >> > + code = riscv_pmu->map_cache_event(attr->config);
> >> > + break;
> >> > + case PERF_TYPE_RAW:
> >> > + return -EOPNOTSUPP;
> >> > + default:
> >> > + return -ENOENT;
> >> > + }
> >> > +
> >> > + event->destroy = riscv_event_destroy;
> >> > + if (code < 0) {
> >> > + event->destroy(event);
> >> > + return code;
> >> > + }
> >> > +
> >> > + /*
> >> > + * idx is set to -1 because the index of a general event should
> >> > not be
> >> > + * decided until binding to some counter in pmu->add().
> >> > + *
> >> > + * But since we don't have such support, later in pmu->add(), we
> >> > just
> >> > + * use hwc->config as the index instead.
> >> > + */
> >> > + hwc->config = code;
> >> > + hwc->idx = -1;
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > +/*
> >> > + * Initialization
> >> > + */
> >> > +
> >> > +static struct pmu min_pmu = {
> >> > + .name = "riscv-base",
> >> > + .event_init = riscv_event_init,
> >> > + .add = riscv_pmu_add,
> >> > + .del = riscv_pmu_del,
> >> > + .start = riscv_pmu_start,
> >> > + .stop = riscv_pmu_stop,
> >> > + .read = riscv_pmu_read,
> >> > +};
> >> > +
> >> > +static const struct riscv_pmu riscv_base_pmu = {
> >> > + .pmu = &min_pmu,
> >> > + .max_events = ARRAY_SIZE(riscv_hw_event_map),
> >> > + .map_hw_event = riscv_map_hw_event,
> >> > + .hw_events = riscv_hw_event_map,
> >> > + .map_cache_event = riscv_map_cache_event,
> >> > + .cache_events = &riscv_cache_event_map,
> >> > + .counter_width = 63,
> >> > + .num_counters = RISCV_BASE_COUNTERS + 0,
> >> > +};
> >> > +
> >> > +struct pmu * __weak __init riscv_init_platform_pmu(void)
> >> > +{
> >> > + riscv_pmu = &riscv_base_pmu;
> >> > + return riscv_pmu->pmu;
> >> > +}
> >> > +
> >> > +int __init init_hw_perf_events(void)
> >> > +{
> >> > + struct pmu *pmu = riscv_init_platform_pmu();
> >> > +
> >> > + perf_irq = NULL;
> >> > + perf_pmu_register(pmu, "cpu", PERF_TYPE_RAW);
> >> > + return 0;
> >> > +}
> >> > +arch_initcall(init_hw_perf_events);
> >> > --
> >> > 2.16.2
> >> >
> >> >