Re: [PATCH v1] scsi: ufs: add 2 lane support

From: Vivek Gautam
Date: Mon Apr 02 2018 - 06:01:02 EST


Hi Can,


On 3/2/2018 1:48 PM, Can Guo wrote:
From: Venkat Gopalakrishnan <venkatg@xxxxxxxxxxxxxx>

Qcom ufs controller v3.1.0 supports 2 lanes, add support
to configure 2 lanes during phy initialization.

Signed-off-by: Venkat Gopalakrishnan <venkatg@xxxxxxxxxxxxxx>
Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
---
drivers/scsi/ufs/ufs-qcom.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 2b38db2..51889ad 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -113,10 +113,10 @@ static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
if (!host->is_lane_clks_enabled)
return;
- if (host->hba->lanes_per_direction > 1)
+ if (host->tx_l1_sync_clk)
clk_disable_unprepare(host->tx_l1_sync_clk);
clk_disable_unprepare(host->tx_l0_sync_clk);
- if (host->hba->lanes_per_direction > 1)
+ if (host->rx_l1_sync_clk)
clk_disable_unprepare(host->rx_l1_sync_clk);
clk_disable_unprepare(host->rx_l0_sync_clk);
@@ -147,18 +147,15 @@ static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
if (err)
goto disable_tx_l0;
- err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
- host->tx_l1_sync_clk);
- if (err)
- goto disable_rx_l1;
+ /* The tx lane1 clk could be muxed, hence keep this optional */

You need a similar change for "rx_l1_sync_clk" also.
And also get rid of 'lanes_per_direction' flag as well for ufs_qcom_enable_lane_clks()
and ufs_qcom_init_lane_clks() too, as you are doing in ufs_qcom_disable_lane_clks().

+ if (host->tx_l1_sync_clk)
+ ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
+ host->tx_l1_sync_clk);
}
host->is_lane_clks_enabled = true;
goto out;
-disable_rx_l1:
- if (host->hba->lanes_per_direction > 1)
- clk_disable_unprepare(host->rx_l1_sync_clk);
disable_tx_l0:
clk_disable_unprepare(host->tx_l0_sync_clk);
disable_rx_l0:
@@ -189,8 +186,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
if (err)
goto out;
- err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
- &host->tx_l1_sync_clk);
+ /* The tx lane1 clk could be muxed, hence keep this optional */
+ ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
+ &host->tx_l1_sync_clk);

same here.

Best regards
Vivek

}
out:
return err;