Re: [PATCH] usb: musb: Support gadget mode when the port is set to dual role

[Maxime Ripard]

Hi,

On Thu, Mar 29, 2018 at 01:57:24PM +0200, Paul Kocialkowski wrote:
> On Thu, 2018-03-29 at 11:23 +0200, Maxime Ripard wrote:
> > On Wed, Mar 28, 2018 at 11:52:13PM +0200, Paul Kocialkowski wrote:
> > > This allows dual-role ports to be reported as having gadget mode by
> > > the
> > > musb_has_gadget helper. This is required to enable MUSB at all with
> > > MUSB
> > > glue layers that set the port mode to MUSB_PORT_MODE_DUAL_ROLE at
> > > init.
> > > 
> > > Most notably, this allows calling musb_start when needed in the
> > > virtual
> > > MUSB root HUB, regardless of whether the current mode should be
> > > gadget
> > > or host.
> > > 
> > > This fixes USB OTG on Allwinner devices that I could test it with,
> > > mainly A20 devices.
> > > 
> > > Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> > 
> > Surely there's more to it than that. The gadget mode of A20 boards
> > have been working in the past, including when compiling with mUSB
> > setup as dual role.
> >
> > Is this a regression since a particular commit? Or is there another,
> > deeper issue overlooked in the commit log?
> 
> The root of the issue here is that musb_start is not called at any point
> without this patch. My understanding of the flow is the following: when
> the PHY detects that there was a VBUS/ID change, it will notify its
> listeners (mainly the musb sunxi glue layer). This will then schedule
> the driver's work (sunxi_musb_work), which does nothing since the
> SUNXI_MUSB_FL_ENABLED bit was never set. This bit is only set after
> calling sunxi_musb_enable, which is called from musb_platform_enable,
> that originates from musb_start.
> 
> Currently I see two places where musb_start is called:
> * musb_virthub
> * musb_gadget
> 
> In the latter case, it is in turn called from udc_start, which should
> probably (correct me if I'm wrong) happen later in the call chain than
> ID/VBUS change notification time.
> 
> In the former case, musb_start is called in the root controller hub
> control, when setting the USB_PORT_FEAT_POWER feature. This looks
> perfectly legit and IMO this is where it should be initially calling
> musb_start in the dual role case. The kernel is indeed setting the
> feature, only that it fails to enable musb without this patch.
> 
> First, I'd like to make sure that this understanding of the flow is
> correct as I may have missed something here. Does it make sense?
> 
> Then, it seems that the offending commit is: be9d39881fc4f
> ("usb: musb: host: rely on port_mode to call musb_start()")
> 
> That itself fixed: ae44df2e21b5
> ("usb: musb: call musb_start() only once in OTG mode")
> 
> Still, this commit was authored in June 2015, so almost 3 years ago.
> In the meantime, the sunxi driver has received feature improvements, so
> it seems hard to believe that it was broken all this time...

I'm not that knowlegdeable about the musb driver, so I can't really
comment on whether what you're saying actually makes sense, but from
what you seem to say, the issue is just happening upon VBUS / ID
notification.

Have you tested without the role switching? For example, trying to
boot while acting as a gadget?

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature