Re: [PATCH 3/8] bindings: PCI: designware: Add support for the EP in designware driver

[Gustavo Pimentel]

Hi Lorenzo,

On 04/04/2018 12:50, Lorenzo Pieralisi wrote:
> On Wed, Mar 28, 2018 at 12:38:33PM +0100, Gustavo Pimentel wrote:
> 
> Please always write a commit log even if it is trivial.

Ok, Kishon has also refered that. On next patch version it'll contain a log
description.

> 
> Thanks,
> Lorenzo
> 
>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/pci/designware-pcie.txt | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> index 6300762..4bb2e08 100644
>> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> @@ -3,6 +3,7 @@
>>  Required properties:
>>  - compatible:
>>  	"snps,dw-pcie" for RC mode;
>> +	"snps,dw-pcie-ep" for EP mode;
>>  - reg: Should contain the configuration address space.
>>  - reg-names: Must be "config" for the PCIe configuration space.
>>      (The old way of getting the configuration address space from "ranges"
>> @@ -56,3 +57,15 @@ Example configuration:
>>  		#interrupt-cells = <1>;
>>  		num-lanes = <1>;
>>  	};
>> +or
>> +	pcie_ep: pcie_ep@dfc00000 {
>> +		compatible = "snps,dw-pcie-ep";
>> +		reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
>> +		      <0xdfc01000 0x0001000>, /* IP registers 2 */
>> +		      <0xd0000000 0x2000000>; /* Configuration space */
>> +		reg-names = "dbi", "dbi2", "addr_space";
>> +		device_type = "pci";
>> +		num-ib-windows = <6>;
>> +		num-ob-windows = <2>;
>> +		num-lanes = <1>;
>> +	};
>> -- 
>> 2.7.4
>>
>>

Regards,
Gustavo