Re: [PATCH v5 07/13] ARM: smp: Add initialization of CNTVOFF
From: Marc Zyngier
Date: Wed Apr 04 2018 - 09:01:57 EST
Hi MylÃne,
On 03/04/18 07:18, MylÃne Josserand wrote:
> The CNTVOFF register from arch timer is uninitialized.
> It should be done by the bootloader but it is currently not the case,
> even for boot CPU because this SoC is booting in secure mode.
> It leads to an random offset value meaning that each CPU will have a
> different time, which isn't working very well.
>
> Add assembly code used for boot CPU and secondary CPU cores to make
> sure that the CNTVOFF register is initialized. Because this code can
> be used by different platforms, add this assembly file in ARM's common
> folder.
>
> Signed-off-by: MylÃne Josserand <mylene.josserand@xxxxxxxxxxx>
> ---
> arch/arm/common/Makefile | 1 +
> arch/arm/common/smp_cntvoff.S | 35 +++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/smp_cntvoff.h | 8 ++++++++
> 3 files changed, 44 insertions(+)
> create mode 100644 arch/arm/common/smp_cntvoff.S
> create mode 100644 arch/arm/include/asm/smp_cntvoff.h
>
> diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
> index 70b4a14ed993..83117deb86c8 100644
> --- a/arch/arm/common/Makefile
> +++ b/arch/arm/common/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o
> obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
> obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
> obj-$(CONFIG_SHARP_SCOOP) += scoop.o
> +obj-$(CONFIG_SMP) += smp_cntvoff.o
> obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
> obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
> CFLAGS_REMOVE_mcpm_entry.o = -pg
> diff --git a/arch/arm/common/smp_cntvoff.S b/arch/arm/common/smp_cntvoff.S
> new file mode 100644
> index 000000000000..65ed199a50fe
> --- /dev/null
> +++ b/arch/arm/common/smp_cntvoff.S
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Chen-Yu Tsai
> + * Copyright (c) 2018 Bootlin
> + *
> + * Chen-Yu Tsai <wens@xxxxxxxx>
> + * MylÃne Josserand <mylene.josserand@xxxxxxxxxxx>
Given that this is literally lifted from shmobile_init_cntvoff, the
whole attribution is a bit dubious.
> + *
> + * SMP support for sunxi based systems with Cortex A7/A15
That's not restricted to sunxi, is it?
> + *
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/assembler.h>
> +
> +ENTRY(smp_init_cntvoff)
The name doesn't quite reflect the usage constraints. This will only
work if used from secure, and is UNPREDICTABLE otherwise (see the CPS
instruction). Also, the "smp" prefix is quite misleading, as it only
affects the current CPU, and not any other.
How about secure_cntvoff_init instead? Same thing for the file name.
> + .arch armv7-a
> + /*
> + * CNTVOFF has to be initialized either from non-secure Hypervisor
> + * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
> + * then it should be handled by the secure code
> + */
> + cps #MON_MODE
> + mrc p15, 0, r1, c1, c1, 0 /* Get Secure Config */
> + orr r0, r1, #1
> + mcr p15, 0, r0, c1, c1, 0 /* Set Non Secure bit */
> + isb
> + mov r0, #0
> + mcrr p15, 4, r0, r0, c14 /* CNTVOFF = 0 */
> + isb
> + mcr p15, 0, r1, c1, c1, 0 /* Set Secure bit */
> + isb
> + cps #SVC_MODE
> + ret lr
> +ENDPROC(smp_init_cntvoff)
> diff --git a/arch/arm/include/asm/smp_cntvoff.h b/arch/arm/include/asm/smp_cntvoff.h
> new file mode 100644
> index 000000000000..59a95f7604ee
> --- /dev/null
> +++ b/arch/arm/include/asm/smp_cntvoff.h
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#ifndef __ASMARM_ARCH_CNTVOFF_H
> +#define __ASMARM_ARCH_CNTVOFF_H
> +
> +extern void smp_init_cntvoff(void);
> +
> +#endif
>
It'd be good to take this opportunity to refactor the shmobile code.
Thanks,
M.
--
Jazz is not dead. It just smells funny...