Re: [RFC 2/3] drm: Add helper iterator functions to iterate over plane damage.
From: Daniel Vetter
Date: Thu Apr 05 2018 - 03:52:17 EST
On Wed, Apr 04, 2018 at 04:49:07PM -0700, Deepak Rawat wrote:
> With damage property in drm_plane_state, this patch adds helper iterator
> to traverse the damage clips. Iterator will return the damage rectangles
> in framebuffer, plane or crtc coordinates as need by driver
> implementation.
>
> Signed-off-by: Deepak Rawat <drawat@xxxxxxxxxx>
I'd really like selftest/unittests for this stuff. There's an awful lot of
cornercases in this here (for any of the transformed iterators at least),
and unit tests is the best way to make sure we handle them all correctly.
Bonus points if you integrate the new selftests into igt so intel CI can
run them, seel igt/tests/drm_mm.c for an example. drm_mm selftest is also
the framework I'd copy for this stuff.
> ---
> drivers/gpu/drm/drm_atomic_helper.c | 122 ++++++++++++++++++++++++++++++++++++
> include/drm/drm_atomic_helper.h | 39 ++++++++++++
> 2 files changed, 161 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 55b44e3..355b514 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -3865,3 +3865,125 @@ void __drm_atomic_helper_private_obj_duplicate_state(struct drm_private_obj *obj
> memcpy(state, obj->state, sizeof(*state));
> }
> EXPORT_SYMBOL(__drm_atomic_helper_private_obj_duplicate_state);
> +
> +/**
> + * drm_atomic_helper_damage_iter_init - initialize the damage iterator
> + * @iter: The iterator to initialize.
> + * @type: Coordinate type caller is interested in.
> + * @state: plane_state from which to iterate the damage clips.
> + * @hdisplay: Width of crtc on which plane is scanned out.
> + * @vdisplay: Height of crtc on which plane is scanned out.
> + *
> + * Initialize an iterator that is used to translate and clip a set of damage
> + * rectangles in framebuffer coordinates to plane and crtc coordinates. The type
> + * argument specify which type of coordinate to iterate in.
> + *
> + * Returns: 0 on success and negative error code on error. If an error code is
> + * returned then it means the plane state should not update.
> + */
> +int
> +drm_atomic_helper_damage_iter_init(struct drm_atomic_helper_damage_iter *iter,
> + enum drm_atomic_helper_damage_clip_type type,
> + const struct drm_plane_state *state,
> + uint32_t hdisplay, uint32_t vdisplay)
> +{
> + if (!state || !state->crtc || !state->fb)
> + return -EINVAL;
> +
> + memset(iter, 0, sizeof(*iter));
> + iter->clips = (struct drm_rect *)state->damage_clips->data;
> + iter->num_clips = state->num_clips;
> + iter->type = type;
> +
> + /*
> + * Full update in case of scaling or rotation. In future support for
> + * scaling/rotating damage clips can be added
> + */
> + if (state->crtc_w != (state->src_w >> 16) ||
> + state->crtc_h != state->src_h >> 16 || state->rotation != 0) {
> + iter->curr_clip = iter->num_clips;
> + return 0;
Given there's no user of this I have no idea how this manages to provoke a
full clip rect. selftest code would be perfect for stuff like this.
Also, I think we should provide a full clip for the case of num_clips ==
0, so that driver code can simply iterate over all clips and doesn't ever
have to handle the "no clip rects provided" case as a special case itself.
> + }
> +
> + iter->fb_src.x1 = 0;
> + iter->fb_src.y1 = 0;
> + iter->fb_src.x2 = state->fb->width;
> + iter->fb_src.y2 = state->fb->height;
> +
> + iter->plane_src.x1 = state->src_x >> 16;
> + iter->plane_src.y1 = state->src_y >> 16;
> + iter->plane_src.x2 = iter->plane_src.x1 + (state->src_w >> 16);
> + iter->plane_src.y2 = iter->plane_src.y1 + (state->src_h >> 16);
> + iter->translate_plane_x = -iter->plane_src.x1;
> + iter->translate_plane_y = -iter->plane_src.y1;
> +
> + /* Clip plane src rect to fb dimensions */
> + drm_rect_intersect(&iter->plane_src, &iter->fb_src);
This smells like driver bug. Also, see Ville's recent efforts to improve
the atomic plane clipping, I think drm_plane_state already has all the
clip rects you want.
> +
> + iter->crtc_src.x1 = 0;
> + iter->crtc_src.y1 = 0;
> + iter->crtc_src.x2 = hdisplay;
> + iter->crtc_src.y2 = vdisplay;
> + iter->translate_crtc_x = -(iter->plane_src.x1 - state->crtc_x);
> + iter->translate_crtc_x = -(iter->plane_src.y1 - state->crtc_y);
> +
> + /* Clip crtc src rect to plane dimensions */
> + drm_rect_translate(&iter->crtc_src, -iter->translate_crtc_x,
> + -iter->translate_crtc_x);
We can also scale.
> + drm_rect_intersect(&iter->crtc_src, &iter->plane_src);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_damage_iter_init);
> +
> +/**
> + * drm_atomic_helper_damage_iter_next - advance the damage iterator
> + * @iter: The iterator to advance.
> + * @rect: Return a rectangle in coordinate specified during iterator init.
> + *
> + * Returns: true if the output is valid, false if we've reached the end of the
> + * rectangle list. If the first call return false, means need full update.
> + */
> +bool
> +drm_atomic_helper_damage_iter_next(struct drm_atomic_helper_damage_iter *iter,
> + struct drm_rect *rect)
> +{
> + const struct drm_rect *curr_clip;
> +
> +next_clip:
> + if (iter->curr_clip >= iter->num_clips)
> + return false;
> +
> + curr_clip = &iter->clips[iter->curr_clip];
> + iter->curr_clip++;
> +
> + rect->x1 = curr_clip->x1;
> + rect->x2 = curr_clip->x2;
> + rect->y1 = curr_clip->y1;
> + rect->y2 = curr_clip->y2;
> +
> + /* Clip damage rect within fb limit */
> + if (!drm_rect_intersect(rect, &iter->fb_src))
> + goto next_clip;
> + else if (iter->type & DRM_ATOMIC_HELPER_DAMAGE_CLIP_TYPE_FB)
> + return true;
> +
> + /* Clip damage rect within plane limit */
> + if (!drm_rect_intersect(rect, &iter->plane_src))
> + goto next_clip;
> + else if (iter->type & DRM_ATOMIC_HELPER_DAMAGE_CLIP_TYPE_PLANE) {
> + drm_rect_translate(rect, iter->translate_plane_x,
> + iter->translate_plane_y);
> + return true;
> + }
> +
> + /* Clip damage rect within crtc limit */
> + if (!drm_rect_intersect(rect, &iter->crtc_src))
> + goto next_clip;
> +
> + drm_rect_translate(rect, iter->translate_crtc_x,
> + iter->translate_crtc_y);
> +
> + return true;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_damage_iter_next);
> diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
> index 26aaba5..ebd4b66 100644
> --- a/include/drm/drm_atomic_helper.h
> +++ b/include/drm/drm_atomic_helper.h
> @@ -36,6 +36,37 @@ struct drm_atomic_state;
> struct drm_private_obj;
> struct drm_private_state;
>
> +/**
> + * enum drm_atomic_helper_damage_clip_type - type of clips to iterator over
> + *
> + * While using drm_atomic_helper_damage_iter the type of clip coordinates caller
> + * is interested in.
> + */
> +enum drm_atomic_helper_damage_clip_type {
> + DRM_ATOMIC_HELPER_DAMAGE_CLIP_TYPE_FB = 0x0,
> + DRM_ATOMIC_HELPER_DAMAGE_CLIP_TYPE_PLANE = 0x1,
> + DRM_ATOMIC_HELPER_DAMAGE_CLIP_TYPE_CRTC = 0x2,
I'm confused with what exactly these different types of iterators are
supposed to achieve. TYPE_FB makes sense, that's what vmwgfx and other
virtual drivers need to figure out which parts of a buffer to upload to
the host.
TYPE_PLANE I have no idea who needs that. I suggest we just drop it.
TYPE_CRTC is what I'd want to use for manual upload hw, were instead of
compositing the entire screen we can limit the uploaded area to 1 or 2
rectangles (depending upon how the hw works). But those drivers want all
the crtc clip rects for _all_ the planes combined, not for each plane
individually.
My suggestion is to drop TYPE_CRTC until someone needs it for a driver.
And most likely the only iterator we want for TYPE_CRTC is one that gives
you the overall damage area, including alpha/ctm/gamma/everything else,
coalesced into just 1 clip rect. So probably an entirely different
function.
Summarizing all this, I'd simplify the iterator to:
drm_atomic_helper_damage_iter_init(iter, plane_state);
And leave the other 2 use-cases to the next patch series. For crtc damage
we probably want:
drm_atomic_helper_crtc_damage(drm_atomic_state, rect)
Which internally loops over all planes and also takes all the other state
changes into account. That way you also don't have to fix the scaling
issue, since your current code only handles translation.
Another bit: drm_atomic_helper.c is huge, I'd vote to put all this stuff
into a new drm_damage_helper.[hc], including new section in drm-kms.rst
and all that. Splitting up drm_atomic_helper.[hc] is somewhere on my todo
...
Cheers, Daniel
> +};
> +
> +/**
> + * struct drm_atomic_helper_damage_iter - damage clip iterator
> + *
> + * This iterator tracks state needed to walk the list of damage clips.
> + */
> +struct drm_atomic_helper_damage_iter {
> + enum drm_atomic_helper_damage_clip_type type;
> + const struct drm_rect *clips;
> + uint32_t num_clips;
> + uint32_t curr_clip;
> + struct drm_rect fb_src;
> + int translate_plane_x;
> + int translate_plane_y;
> + struct drm_rect plane_src;
> + int translate_crtc_x;
> + int translate_crtc_y;
> + struct drm_rect crtc_src;
> +};
> +
> int drm_atomic_helper_check_modeset(struct drm_device *dev,
> struct drm_atomic_state *state);
> int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state,
> @@ -185,6 +216,14 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
> struct drm_modeset_acquire_ctx *ctx);
> void __drm_atomic_helper_private_obj_duplicate_state(struct drm_private_obj *obj,
> struct drm_private_state *state);
> +int
> +drm_atomic_helper_damage_iter_init(struct drm_atomic_helper_damage_iter *iter,
> + enum drm_atomic_helper_damage_clip_type type,
> + const struct drm_plane_state *state,
> + uint32_t hdisplay, uint32_t vdisplay);
> +bool
> +drm_atomic_helper_damage_iter_next(struct drm_atomic_helper_damage_iter *iter,
> + struct drm_rect *rect);
>
> /**
> * drm_atomic_crtc_for_each_plane - iterate over planes currently attached to CRTC
> --
> 2.7.4
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch