[PATCH AUTOSEL for 3.18 072/101] watchdog: sp5100_tco: Fix watchdog disable bit

[Sasha Levin]

From: Guenter Roeck <linux@xxxxxxxxxxxx>

[ Upstream commit f541c09ebfc61697b586b38c9ebaf4b70defb278 ]

According to all published information, the watchdog disable bit for SB800
compatible controllers is bit 1 of PM register 0x48, not bit 2. For the
most part that doesn't matter in practice, since the bit has to be cleared
to enable watchdog address decoding, which is the default setting, but it
still needs to be fixed.

Cc: ZoltÃn BÃszÃrmÃnyi <zboszor@xxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/watchdog/sp5100_tco.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
index 2b28c00da0df..dfe20b81ced5 100644
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -54,7 +54,7 @@
 #define SB800_PM_WATCHDOG_CONFIG	0x4C
 
 #define SB800_PCI_WATCHDOG_DECODE_EN	(1 << 0)
-#define SB800_PM_WATCHDOG_DISABLE	(1 << 2)
+#define SB800_PM_WATCHDOG_DISABLE	(1 << 1)
 #define SB800_PM_WATCHDOG_SECOND_RES	(3 << 0)
 #define SB800_ACPI_MMIO_DECODE_EN	(1 << 0)
 #define SB800_ACPI_MMIO_SEL		(1 << 1)
-- 
2.15.1