[PATCH AUTOSEL for 4.15 132/189] IB/hfi1: Show fault stats in both TX and RX directions

[Sasha Levin]

From: Mitko Haralanov <mitko.haralanov@xxxxxxxxx>

[ Upstream commit b5de809ef6f6c32cfbbf0da14ed11b0fdc0888f8 ]

The routine which shows the fault stats checks the counters
to determine whether to show any stats based on the number of
transmitted pkts/bytes for a particular opcode.

Unfortunately, it only checked the receive counters. As a result,
if any packet faults have happened for packets egressing the HFI,
those stats would not be shown.

In order to fix this, the routine is amended to also check the
TX counters. With this change the pkt/byte counts are the sum of
both TX and RX counts for the opcode.

Fixes: 1b311f8931cf ("IB/hfi1: Add tx_opcode_stats like the opcode_stats")
Reviewed-by: Don Hiatt <don.hiatt@xxxxxxxxx>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@xxxxxxxxx>
Signed-off-by: Mitko Haralanov <mitko.haralanov@xxxxxxxxx>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxx>
Signed-off-by: Jason Gunthorpe <jgg@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/infiniband/hw/hfi1/debugfs.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/hfi1/debugfs.c b/drivers/infiniband/hw/hfi1/debugfs.c
index 2e6e0c516041..852173bf05d0 100644
--- a/drivers/infiniband/hw/hfi1/debugfs.c
+++ b/drivers/infiniband/hw/hfi1/debugfs.c
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2015-2017 Intel Corporation.
+ * Copyright(c) 2015-2018 Intel Corporation.
  *
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
@@ -1201,6 +1201,13 @@ static int _fault_stats_seq_show(struct seq_file *s, void *v)
 		}
 		hfi1_rcd_put(rcd);
 	}
+	for_each_possible_cpu(j) {
+		struct hfi1_opcode_stats_perctx *sp =
+			per_cpu_ptr(dd->tx_opstats, j);
+
+		n_packets += sp->stats[i].n_packets;
+		n_bytes += sp->stats[i].n_bytes;
+	}
 	if (!n_packets && !n_bytes)
 		return SEQ_SKIP;
 	if (!ibd->fault_opcode->n_rxfaults[i] &&
-- 
2.15.1