[PATCH v2 3/9] bindings: PCI: designware: Add support for the EP in Designware driver

[Gustavo Pimentel]

Add device tree binding documentation for the Endpoint in PCIe Designware
driver.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
---
Change v1->v2:
 - Add a missing log description.
 - Add "snps,dw-pcie" compatible string following Kishon's suggestion.

 Documentation/devicetree/bindings/pci/designware-pcie.txt | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index f02cd20..f5da9cf 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -3,6 +3,7 @@
 Required properties:
 - compatible:
 	"snps,dw-pcie-rc", "snps,dw-pcie" for RC mode;
+	"snps,dw-pcie-ep", "snps,dw-pcie" for EP mode;
 - reg: Should contain the configuration address space.
 - reg-names: Must be "config" for the PCIe configuration space.
     (The old way of getting the configuration address space from "ranges"
@@ -56,3 +57,15 @@ Example configuration:
 		#interrupt-cells = <1>;
 		num-lanes = <1>;
 	};
+or
+	pcie_ep: pcie_ep@dfc00000 {
+		compatible = "snps,dw-pcie-ep", "snps,dw_pcie";
+		reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+		      <0xdfc01000 0x0001000>, /* IP registers 2 */
+		      <0xd0000000 0x2000000>; /* Configuration space */
+		reg-names = "dbi", "dbi2", "addr_space";
+		device_type = "pci";
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		num-lanes = <1>;
+	};
-- 
2.7.4