[tip:x86/pti] x86/mm: Factor out pageattr _PAGE_GLOBAL setting

[tip-bot for Dave Hansen]

Commit-ID:  d1440b23c922d845ff039f64694a32ff356e89fa
Gitweb:     https://git.kernel.org/tip/d1440b23c922d845ff039f64694a32ff356e89fa
Author:     Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
AuthorDate: Fri, 6 Apr 2018 13:55:02 -0700
Committer:  Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Mon, 9 Apr 2018 18:27:32 +0200

x86/mm: Factor out pageattr _PAGE_GLOBAL setting

The pageattr code has a pattern repeated where it sets _PAGE_GLOBAL
for present PTEs but clears it for non-present PTEs.  The intention
is to keep _PAGE_GLOBAL from getting confused with _PAGE_PROTNONE
since _PAGE_GLOBAL is for present PTEs and _PAGE_PROTNONE is for
non-present

But, this pattern makes no sense.  Effectively, it says, if you use
the pageattr code, always set _PAGE_GLOBAL when _PAGE_PRESENT.
canon_pgprot() will clear it if unsupported (because it masks the
value with __supported_pte_mask) but we *always* set it. Even if
canon_pgprot() did not filter _PAGE_GLOBAL, it would be OK.
_PAGE_GLOBAL is ignored when CR4.PGE=0 by the hardware.

This unconditional setting of _PAGE_GLOBAL is a problem when we have
PTI and non-PTI and we want some areas to have _PAGE_GLOBAL and some
not.

This updated version of the code says:
1. Clear _PAGE_GLOBAL when !_PAGE_PRESENT
2. Never set _PAGE_GLOBAL implicitly
3. Allow _PAGE_GLOBAL to be in cpa.set_mask
4. Allow _PAGE_GLOBAL to be inherited from previous PTE

Signed-off-by: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: Andrea Arcangeli <aarcange@xxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Hugh Dickins <hughd@xxxxxxxxxx>
Cc: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Cc: Juergen Gross <jgross@xxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Nadav Amit <namit@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: linux-mm@xxxxxxxxx
Link: http://lkml.kernel.org/r/20180406205502.86E199DA@xxxxxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
 arch/x86/mm/pageattr.c | 66 ++++++++++++++++++--------------------------------
 1 file changed, 23 insertions(+), 43 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 85cf12219dea..4d369d5c04c5 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -512,6 +512,23 @@ static void __set_pmd_pte(pte_t *kpte, unsigned long address, pte_t pte)
 #endif
 }
 
+static pgprot_t pgprot_clear_protnone_bits(pgprot_t prot)
+{
+	/*
+	 * _PAGE_GLOBAL means "global page" for present PTEs.
+	 * But, it is also used to indicate _PAGE_PROTNONE
+	 * for non-present PTEs.
+	 *
+	 * This ensures that a _PAGE_GLOBAL PTE going from
+	 * present to non-present is not confused as
+	 * _PAGE_PROTNONE.
+	 */
+	if (!(pgprot_val(prot) & _PAGE_PRESENT))
+		pgprot_val(prot) &= ~_PAGE_GLOBAL;
+
+	return prot;
+}
+
 static int
 try_preserve_large_page(pte_t *kpte, unsigned long address,
 			struct cpa_data *cpa)
@@ -577,18 +594,11 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * different bit positions in the two formats.
 	 */
 	req_prot = pgprot_4k_2_large(req_prot);
-
-	/*
-	 * Set the PSE and GLOBAL flags only if the PRESENT flag is
-	 * set otherwise pmd_present/pmd_huge will return true even on
-	 * a non present pmd. The canon_pgprot will clear _PAGE_GLOBAL
-	 * for the ancient hardware that doesn't support it.
-	 */
+	req_prot = pgprot_clear_protnone_bits(req_prot);
 	if (pgprot_val(req_prot) & _PAGE_PRESENT)
-		pgprot_val(req_prot) |= _PAGE_PSE | _PAGE_GLOBAL;
+		pgprot_val(req_prot) |= _PAGE_PSE;
 	else
-		pgprot_val(req_prot) &= ~(_PAGE_PSE | _PAGE_GLOBAL);
-
+		pgprot_val(req_prot) &= ~_PAGE_PSE;
 	req_prot = canon_pgprot(req_prot);
 
 	/*
@@ -698,16 +708,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 		return 1;
 	}
 
-	/*
-	 * Set the GLOBAL flags only if the PRESENT flag is set
-	 * otherwise pmd/pte_present will return true even on a non
-	 * present pmd/pte. The canon_pgprot will clear _PAGE_GLOBAL
-	 * for the ancient hardware that doesn't support it.
-	 */
-	if (pgprot_val(ref_prot) & _PAGE_PRESENT)
-		pgprot_val(ref_prot) |= _PAGE_GLOBAL;
-	else
-		pgprot_val(ref_prot) &= ~_PAGE_GLOBAL;
+	ref_prot = pgprot_clear_protnone_bits(ref_prot);
 
 	/*
 	 * Get the target pfn from the original entry:
@@ -930,18 +931,7 @@ static void populate_pte(struct cpa_data *cpa,
 
 	pte = pte_offset_kernel(pmd, start);
 
-	/*
-	 * Set the GLOBAL flags only if the PRESENT flag is
-	 * set otherwise pte_present will return true even on
-	 * a non present pte. The canon_pgprot will clear
-	 * _PAGE_GLOBAL for the ancient hardware that doesn't
-	 * support it.
-	 */
-	if (pgprot_val(pgprot) & _PAGE_PRESENT)
-		pgprot_val(pgprot) |= _PAGE_GLOBAL;
-	else
-		pgprot_val(pgprot) &= ~_PAGE_GLOBAL;
-
+	pgprot = pgprot_clear_protnone_bits(pgprot);
 	pgprot = canon_pgprot(pgprot);
 
 	while (num_pages-- && start < end) {
@@ -1234,17 +1224,7 @@ repeat:
 
 		new_prot = static_protections(new_prot, address, pfn);
 
-		/*
-		 * Set the GLOBAL flags only if the PRESENT flag is
-		 * set otherwise pte_present will return true even on
-		 * a non present pte. The canon_pgprot will clear
-		 * _PAGE_GLOBAL for the ancient hardware that doesn't
-		 * support it.
-		 */
-		if (pgprot_val(new_prot) & _PAGE_PRESENT)
-			pgprot_val(new_prot) |= _PAGE_GLOBAL;
-		else
-			pgprot_val(new_prot) &= ~_PAGE_GLOBAL;
+		new_prot = pgprot_clear_protnone_bits(new_prot);
 
 		/*
 		 * We need to keep the pfn from the existing PTE,