Re: simultaneous voice/data works (was Re: call/normal switch was Re: omap4-droid4: voice call support was)
From: Pavel Machek
Date: Mon Apr 09 2018 - 16:21:38 EST
On Mon 2018-04-09 07:08:47, Tony Lindgren wrote:
> * Dan Williams <dcbw@xxxxxxxxxx> [180408 02:46]:
> > On Sat, 2018-04-07 at 14:22 +0200, Pavel Machek wrote:
> > > I tried --location-enable-gps-unmanaged , but that did not work for
> > > me.
> >
> > That requires a TTY that would spit out the GPS data; in this mode MM
> > only sends the start/stop commands, and what comes out the GPS TTY is
> > undefined (at least by MM).
> >
> > So unless you know that one of the 6600's TTYs does GPS and in what
> > format it does GPS, then no.
>
> There should be a NMEA port within the unknown port range ttyUSB[123].
>
> Is there some easy way to enable --location-enable-gps-unmanaged for
> testing so I can check if GPS gets enabled for one of the ports?
In the meantime, I got GPS to work :-).
I modified qmicli to pipe NMEA data to stdout, which should be enough.
But yes, directly exposing NMEA data on ttyGSM? would be even nicer.
Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature