Re: [PATCH 1/2] tty: n_gsm: Fix long delays with control frame timeouts in ADM mode

From: Pavel Machek
Date: Tue Apr 10 2018 - 07:09:52 EST


On Mon 2018-04-09 06:42:59, Tony Lindgren wrote:
> * Pavel Machek <pavel@xxxxxx> [180409 10:56]:
> > Ok, I should have all that enabled. But droid4-ngsm still fails:
> >
> > user@devuan:/my/droid4-ngsm$ sudo ./droid4-ngsm
> > Starting ngsm..
> > Testing ngsm..
> > Could not open /dev/gsmtty1: Level 2 halted
> > Trying to start ngsm again: Level 2 halted
> > Starting ngsm..
>
> I guess you must have phy-mapphone-mdm6600 enabled as you a have
> working modem over USB. What do you see in dmesg if you enable n_gsm
> debug with modprobe n_gsm debug=0xff or on kernel cmdline?

Ok, I guess I can do that, but first:

Should the modem respond to AT commands on ttyS0? I launched minicom
(115200 8N1) and I'm not getting any responses.

> > commit 984c7706ff180e33096c57183435d925cb644576 says:
> >
> > ARM: dts: omap4-droid4: Configure uart1 pins
> >
> > These are needed to use the n_gsm driver for TS 27.010 UART
> > multiplexing. Note that support for the OOB wake gpio is still
> > missing so the UART is not yet usable for n_gsm.
> >
> > ...am I still missing the OOB wake gpio support?
>
> We can get away without OOB wake gpio for a while as mdm6600 is not
> yet suspended over USB. But if you have manually suspended mdm6600
> USB interface via /sys, then it won't respond properly on n_gsm
> either.

Ahha, ok.

Thanks,
Pavel

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature