[PATCH v3 1/2] dt-bindings: iio: afe: add current-sense-shunt and voltage-divider

[Peter Rosin]

An ADC is often used to measure other quantities indirectly. These
bindings describe two cases, a current through a shunt resistor, and
a "big" voltage measured with the help of a voltage divider.

Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
 .../bindings/iio/afe/current-sense-shunt.txt       | 41 ++++++++++++++++++++
 .../bindings/iio/afe/voltage-divider.txt           | 45 ++++++++++++++++++++++
 MAINTAINERS                                        |  7 ++++
 3 files changed, 93 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
 create mode 100644 Documentation/devicetree/bindings/iio/afe/voltage-divider.txt

diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
new file mode 100644
index 000000000000..4d842aa85040
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
@@ -0,0 +1,41 @@
+Current Sense Shunt
+===================
+
+When an io-channel measures the voltage over a current sense shunt,
+the interesting mesaurement is almost always the current through the
+shunt, not the voltage over it. This binding describes such a current
+sense circuit.
+
+Required properties:
+- compatible : "current-sense-shunt"
+- io-channels : Channel node of a voltage io-channel.
+- shunt-resistor-micro-ohms : The shunt resistance in microohms.
+
+Example:
+The system current is measured by measuring the voltage over a
+3.3 ohms shunt resistor.
+
+sysi {
+	compatible = "current-sense-shunt";
+	io-channels = <&tiadc 0>;
+
+	/* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */
+	shunt-resistor-micro-ohms = <3300000>;
+};
+
+&i2c {
+	tiadc: adc@48 {
+		compatible = "ti,ads1015";
+	      	reg = <0x48>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* IN0,IN1 differential */
+			reg = <0>;
+			ti,gain = <1>;
+			ti,datarate = <4>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
new file mode 100644
index 000000000000..fd4a215d9e6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
@@ -0,0 +1,45 @@
+Voltage divider
+===============
+
+When an io-channel measures the midpoint of a voltage divider, the
+interesting voltage is often the voltage over the full resistance
+of the divider. This binding describes the voltage divider in such
+a curcuit.
+
+Required properties:
+- compatible : "voltage-divider"
+- io-channels : Channel node of a voltage io-channel.
+
+Optional properties:
+- numerator : The io-channel scale is multiplied by this value (default 1).
+- denominator : The io-channel scale is divided by this value (default 1).
+
+Example:
+The system voltage is circa 12V, but divided down with a 22/200
+voltage divider to adjust it to the ADC range.
+
+SYSV        ADC       GND
+  +          +         +
+  |  .-----. | .----.  |
+  '--| 200 |-+-| 22 |--'
+     '-----'   '----'
+
+sysv {
+	compatible = "voltage-divider";
+	io-channels = <&maxadc 1>;
+
+	/* Multiply the ADC voltage by 222/22 to get the system voltage. */
+	numerator = <222>; /* 200 + 22 */
+	denominator = <22>;
+};
+
+&spi {
+	maxadc: adc@0 {
+		compatible = "maxim,max1027";
+	      	reg = <0>;
+		#io-channel-cells = <1>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+		spi-max-frequency = <1000000>;
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 6e950b8b4a41..237fcdfdddc6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6887,6 +6887,13 @@ F:	drivers/staging/iio/
 F:	include/linux/iio/
 F:	tools/iio/
 
+IIO UNIT CONVERTER
+M:	Peter Rosin <peda@xxxxxxxxxx>
+L:	linux-iio@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
+F:	Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
+
 IKANOS/ADI EAGLE ADSL USB DRIVER
 M:	Matthieu Castet <castet.matthieu@xxxxxxx>
 M:	Stanislaw Gruszka <stf_xl@xxxxx>
-- 
2.11.0