Re: [PATCH v2 2/2] vfio: platform: Add generic DT reset controller support

[Geert Uytterhoeven]

Hi Philipp,

On Wed, Apr 11, 2018 at 10:22 AM, Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
> On Tue, 2018-04-10 at 17:53 +0200, Geert Uytterhoeven wrote:
>> Vfio-platform requires reset support, provided either by ACPI, or, on DT
>> platforms, by a device-specific reset driver matching against the
>> device's compatible value.
>>
>> On many SoCs, devices are connected to an SoC-internal reset controller.
>> If the reset hierarchy is described in DT using "resets" properties,
>> such devices can be reset in a generic way through the reset controller
>> subsystem.  Hence add support for this, avoiding the need to write
>> device-specific reset drivers for each single device on affected SoCs.
>>
>> Devices that do require a more complex reset procedure can still provide
>> a device-specific reset driver, as that takes precedence.
>>
>> Note that this functionality depends on CONFIG_RESET_CONTROLLER=y, and
>> becomes a no-op (as in: "No reset function found for device") if reset
>> controller support is disabled.
>>
>> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>
> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>

Thanks!

>> --- a/drivers/vfio/platform/vfio_platform_common.c
>> +++ b/drivers/vfio/platform/vfio_platform_common.c
> [...]
>> @@ -127,8 +136,16 @@ static int vfio_platform_get_reset(struct vfio_platform_device *vdev)
>>               vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
>>                                                       &vdev->reset_module);
>>       }
>> +     if (vdev->of_reset)
>> +             return 0;
>> +
>> +     rstc = of_reset_control_get_exclusive(vdev->device->of_node, NULL);
>
> If vdev->device->of_node == NULL, this will return -EINVAL ...
>
>> +     if (!IS_ERR(rstc)) {
>> +             vdev->reset_control = rstc;
>> +             return 0;
>> +     }
>>
>> -     return vdev->of_reset ? 0 : -ENOENT;
>> +     return PTR_ERR(rstc);
>
> ... instead of -ENOENT, if that makes any difference.

Not really. The single caller (vfio_platform_probe_common()) already returns
-EINVAL if no IOMMU group is found, so this should be handled fine.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds