[PATCH v2 11/12] arm: dts: mt7623: add MT7623A reference boards

From: sean.wang
Date: Wed Apr 11 2018 - 04:56:18 EST


From: Sean Wang <sean.wang@xxxxxxxxxxxx>

Add MT7623A reference board with eMMC and NAND, respectively.

The both boards compared against MT7623N BPI-R2, we could see there are
UART[0-1] and USB2 being removed, I2C2 and SPI1 being added, I2C1, UART2
owning distinct pin usage and an extra WM8960 codec chip plugged into the
I2C1 offering the functionality of audio player and recorder through
SoC audio front-end engine (AFE).

Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Suggested-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/mt7623.dtsi | 32 ++++
arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 291 ++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623a-rfb-nand.dts | 337 +++++++++++++++++++++++++++++++++
4 files changed, 662 insertions(+)
create mode 100644 arch/arm/boot/dts/mt7623a-rfb-emmc.dts
create mode 100644 arch/arm/boot/dts/mt7623a-rfb-nand.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e24249..bc33a3c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1150,6 +1150,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
+ mt7623a-rfb-emmc.dtb \
+ mt7623a-rfb-nand.dtb \
mt7623n-rfb-nand.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 01893858..f84c37b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -960,6 +960,22 @@
};
};

+ i2c1_pins_b: i2c1-alt {
+ pin-i2c1 {
+ pinmux = <MT7623_PIN_242_URTS2_FUNC_SCL1>,
+ <MT7623_PIN_243_UCTS2_FUNC_SDA1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_b: i2c2-alt {
+ pin-i2c2 {
+ pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
+ <MT7623_PIN_123_HTPLG_FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+
i2s0_pins_a: i2s0-default {
pin-i2s0 {
pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
@@ -1160,6 +1176,15 @@
};
};

+ spi1_pins_a: spi1-default {
+ pins-spi {
+ pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>,
+ <MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>,
+ <MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>,
+ <MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>;
+ };
+ };
+
uart0_pins_a: uart0-default {
pins-dat {
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
@@ -1180,4 +1205,11 @@
<MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
};
};
+
+ uart2_pins_b: uart2-alt {
+ pins-dat {
+ pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
+ <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
new file mode 100644
index 0000000..13c8693
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@xxxxxxxxxxxx>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "MediaTek MT7623A with eMMC reference board";
+ compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x20000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "mediatek,mt2701-wm8960-machine";
+ mediatek,platform = <&afe>;
+ audio-routing =
+ "Headphone", "HP_L",
+ "Headphone", "HP_R",
+ "LINPUT1", "AMIC",
+ "RINPUT1", "AMIC";
+ mediatek,audio-codec = <&wm8960>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins_a>;
+ };
+};
+
+&btif {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+ mediatek,mcm;
+ resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+ reset-names = "mcm";
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ status = "okay";
+
+ wm8960: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_b>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_default>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_b>;
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&reg_3p3v>;
+ vbus-supply = <&reg_5v>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
new file mode 100644
index 0000000..88d8f0b
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@xxxxxxxxxxxx>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "MediaTek MT7623A with NAND reference board";
+ compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x20000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "mediatek,mt2701-wm8960-machine";
+ mediatek,platform = <&afe>;
+ audio-routing =
+ "Headphone", "HP_L",
+ "Headphone", "HP_R",
+ "LINPUT1", "AMIC",
+ "RINPUT1", "AMIC";
+ mediatek,audio-codec = <&wm8960>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins_a>;
+ };
+};
+
+&bch {
+ status = "okay";
+};
+
+&btif {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+ mediatek,mcm;
+ resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+ reset-names = "mcm";
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ status = "okay";
+
+ wm8960: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_b>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition@c0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition@2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition@4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition@5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_default>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_b>;
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&reg_3p3v>;
+ vbus-supply = <&reg_5v>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
--
2.7.4