Re: [PATCH] drm/vc4: Add some missing HVS register definitions.

[Stefan Schake]

On Sat, Mar 3, 2018 at 12:03 AM, Eric Anholt <eric@xxxxxxxxxx> wrote:
> At least the RGBA expand field we should have been setting, because we
> aren't expanding correctly for 565 -> 8888.  Other registers are ones
> that may be interesting for various projects that have been discussed.
>
> Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
> Cc: Stefan Schake <stschake@xxxxxxxxx>
> ---
>  drivers/gpu/drm/vc4/vc4_regs.h | 96 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 96 insertions(+)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
> index b9749cb24063..ce8bb7486456 100644
> --- a/drivers/gpu/drm/vc4/vc4_regs.h
> +++ b/drivers/gpu/drm/vc4/vc4_regs.h
> @@ -330,6 +330,21 @@
>  #define SCALER_DISPCTRL0                        0x00000040
>  # define SCALER_DISPCTRLX_ENABLE               BIT(31)
>  # define SCALER_DISPCTRLX_RESET                        BIT(30)
> +/* Generates a single frame when VSTART is seen and stops at the last
> + * pixel read from the FIFO.
> + */
> +# define SCALER_DISPCTRLX_ONESHOT              BIT(29)
> +/* Processes a single context in the dlist and then task switch,
> + * instead of an entire line.
> + */
> +# define SCALER_DISPCTRLX_ONECTX               BIT(28)
> +/* Set to have DISPSLAVE return 2 16bpp pixels and no status data. */
> +# define SCALER_DISPCTRLX_FIFO32               BIT(27)
> +/* Turns on output to the DISPSLAVE register instead of the normal
> + * FIFO.
> + */
> +# define SCALER_DISPCTRLX_FIFOREG              BIT(26)
> +
>  # define SCALER_DISPCTRLX_WIDTH_MASK           VC4_MASK(23, 12)
>  # define SCALER_DISPCTRLX_WIDTH_SHIFT          12
>  # define SCALER_DISPCTRLX_HEIGHT_MASK          VC4_MASK(11, 0)
> @@ -402,6 +417,68 @@
>   */
>  # define SCALER_GAMADDR_SRAMENB                        BIT(30)
>
> +#define SCALER_OLEDOFFS                         0x00000080
> +/* Clamps R to [16,235] and G/B to [16,240]. */
> +# define SCALER_OLEDOFFS_YUVCLAMP               BIT(31)
> +
> +/* Chooses which display FIFO the matrix applies to. */
> +# define SCALER_OLEDOFFS_DISPFIFO_MASK          VC4_MASK(25, 24)
> +# define SCALER_OLEDOFFS_DISPFIFO_SHIFT         24
> +# define SCALER_OLEDOFFS_DISPFIFO_DISABLED      0
> +# define SCALER_OLEDOFFS_DISPFIFO_0             1
> +# define SCALER_OLEDOFFS_DISPFIFO_1             2
> +# define SCALER_OLEDOFFS_DISPFIFO_2             3
> +
> +/* Offsets are 8-bit 2s-complement. */
> +# define SCALER_OLEDOFFS_RED_MASK               VC4_MASK(23, 16)
> +# define SCALER_OLEDOFFS_RED_SHIFT              16
> +# define SCALER_OLEDOFFS_GREEN_MASK             VC4_MASK(15, 8)
> +# define SCALER_OLEDOFFS_GREEN_SHIFT            8
> +# define SCALER_OLEDOFFS_BLUE_MASK              VC4_MASK(7, 0)
> +# define SCALER_OLEDOFFS_BLUE_SHIFT             0
> +
> +/* The coefficients are S0.9 fractions. */
> +#define SCALER_OLEDCOEF0                        0x00000084
> +# define SCALER_OLEDCOEF0_B_TO_R_MASK           VC4_MASK(29, 20)
> +# define SCALER_OLEDCOEF0_B_TO_R_SHIFT          20
> +# define SCALER_OLEDCOEF0_B_TO_G_MASK           VC4_MASK(19, 10)
> +# define SCALER_OLEDCOEF0_B_TO_G_SHIFT          10
> +# define SCALER_OLEDCOEF0_B_TO_B_MASK           VC4_MASK(9, 0)
> +# define SCALER_OLEDCOEF0_B_TO_B_SHIFT          0
> +
> +#define SCALER_OLEDCOEF1                        0x00000088
> +# define SCALER_OLEDCOEF1_G_TO_R_MASK           VC4_MASK(29, 20)
> +# define SCALER_OLEDCOEF1_G_TO_R_SHIFT          20
> +# define SCALER_OLEDCOEF1_G_TO_G_MASK           VC4_MASK(19, 10)
> +# define SCALER_OLEDCOEF1_G_TO_G_SHIFT          10
> +# define SCALER_OLEDCOEF1_G_TO_B_MASK           VC4_MASK(9, 0)
> +# define SCALER_OLEDCOEF1_G_TO_B_SHIFT          0
> +
> +#define SCALER_OLEDCOEF2                        0x0000008c
> +# define SCALER_OLEDCOEF2_R_TO_R_MASK           VC4_MASK(29, 20)
> +# define SCALER_OLEDCOEF2_R_TO_R_SHIFT          20
> +# define SCALER_OLEDCOEF2_R_TO_G_MASK           VC4_MASK(19, 10)
> +# define SCALER_OLEDCOEF2_R_TO_G_SHIFT          10
> +# define SCALER_OLEDCOEF2_R_TO_B_MASK           VC4_MASK(9, 0)
> +# define SCALER_OLEDCOEF2_R_TO_B_SHIFT          0
> +
> +/* Slave addresses for DMAing from HVS composition output to other
> + * devices.  The top bits are valid only in !FIFO32 mode.
> + */
> +#define SCALER_DISPSLAVE0                       0x000000c0
> +#define SCALER_DISPSLAVE1                       0x000000c9
> +#define SCALER_DISPSLAVE2                       0x000000d0
> +# define SCALER_DISPSLAVE_ISSUE_VSTART          BIT(31)
> +# define SCALER_DISPSLAVE_ISSUE_HSTART          BIT(30)
> +/* Set when the current line has been read and an HSTART is required. */
> +# define SCALER_DISPSLAVE_EOL                   BIT(26)
> +/* Set when the display FIFO is empty. */
> +# define SCALER_DISPSLAVE_EMPTY                 BIT(25)
> +/* Set when there is RGB data ready to read. */
> +# define SCALER_DISPSLAVE_VALID                 BIT(24)
> +# define SCALER_DISPSLAVE_RGB_MASK              VC4_MASK(23, 0)
> +# define SCALER_DISPSLAVE_RGB_SHIFT             0
> +
>  #define SCALER_GAMDATA                          0x000000e0
>  #define SCALER_DLIST_START                      0x00002000
>  #define SCALER_DLIST_SIZE                       0x00004000
> @@ -767,6 +844,10 @@ enum hvs_pixel_format {
>         HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE = 9,
>         HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE = 10,
>         HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE = 11,
> +       HVS_PIXEL_FORMAT_H264 = 12,
> +       HVS_PIXEL_FORMAT_PALETTE = 13,
> +       HVS_PIXEL_FORMAT_YUV444_RGB = 14,
> +       HVS_PIXEL_FORMAT_AYUV444_RGB = 15,
>  };
>
>  /* Note: the LSB is the rightmost character shown.  Only valid for
> @@ -800,12 +881,27 @@ enum hvs_pixel_format {
>  #define SCALER_CTL0_TILING_128B                        2
>  #define SCALER_CTL0_TILING_256B_OR_T           3
>
> +#define SCALER_CTL0_ALPHA_MASK                  BIT(19)
>  #define SCALER_CTL0_HFLIP                       BIT(16)
>  #define SCALER_CTL0_VFLIP                       BIT(15)
>
> +#define SCALER_CTL0_KEY_MODE_MASK              VC4_MASK(18, 17)
> +#define SCALER_CTL0_KEY_MODE_SHIFT             17
> +#define SCALER_CTL0_KEY_DISABLED               0
> +#define SCALER_CTL0_KEY_LUMA_OR_COMMON_RGB     1
> +#define SCALER_CTL0_KEY_MATCH                  2 /* turn transparent */
> +#define SCALER_CTL0_KEY_REPLACE                        3 /* replace with value from key mask word 2 */
> +
>  #define SCALER_CTL0_ORDER_MASK                 VC4_MASK(14, 13)
>  #define SCALER_CTL0_ORDER_SHIFT                        13
>
> +#define SCALER_CTL0_RGBA_EXPAND_MASK           VC4_MASK(12, 11)
> +#define SCALER_CTL0_RGBA_EXPAND_SHIFT          11
> +#define SCALER_CTL0_RGBA_EXPAND_ZERO           0
> +#define SCALER_CTL0_RGBA_EXPAND_LSB            1
> +#define SCALER_CTL0_RGBA_EXPAND_MSB            2
> +#define SCALER_CTL0_RGBA_EXPAND_ROUND          3
> +
>  #define SCALER_CTL0_SCL1_MASK                  VC4_MASK(10, 8)
>  #define SCALER_CTL0_SCL1_SHIFT                 8
>
> --
> 2.16.2
>

Acked-by: Stefan Schake <stschake@xxxxxxxxx>

Since the generic plane alpha series is close to going in, we might also
want the alpha mix bit in SCALER_POS2 (bit 28). But we can always do that
as part of an actual series implementing plane alpha.