Re: 4.15.14 crash with iscsi target and dvd

[Ming Lei]

On Tue, Apr 10, 2018 at 08:45:25PM -0400, Wakko Warner wrote:
> Ming Lei wrote:
> > Sure, thanks for your sharing.
> > 
> > Wakko, could you test the following patch and see if there is any
> > difference?
> > 
> > --
> > diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
> > index 0d99b242e82e..6147178f1f37 100644
> > --- a/drivers/target/target_core_pscsi.c
> > +++ b/drivers/target/target_core_pscsi.c
> > @@ -888,7 +888,7 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
> >  		if (len > 0 && data_len > 0) {
> >  			bytes = min_t(unsigned int, len, PAGE_SIZE - off);
> >  			bytes = min(bytes, data_len);
> > -
> > + new_bio:
> >  			if (!bio) {
> >  				nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages);
> >  				nr_pages -= nr_vecs;
> > @@ -931,6 +931,7 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
> >  				 * be allocated with pscsi_get_bio() above.
> >  				 */
> >  				bio = NULL;
> > +				goto new_bio;
> >  			}
> >  
> >  			data_len -= bytes;
> 
> Sorry for the delay.  I reverted my change, added this one.  I didn't
> reboot, I just unloaded and loaded this one.
> Note: /dev/sr1 as seen from the initiator is /dev/sr0 (physical disc) on the
> target.
> 
> Doesn't crash, however on the initiator I see this:
> [9273849.707777] ISO 9660 Extensions: RRIP_1991A
> [9273863.359718] scsi_io_completion: 13 callbacks suppressed
> [9273863.359788] sr 26:0:0:0: [sr1] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
> [9273863.359909] sr 26:0:0:0: [sr1] tag#1 Sense Key : 0x2 [current] 
> [9273863.359974] sr 26:0:0:0: [sr1] tag#1 ASC=0x8 ASCQ=0x0 
> [9273863.360036] sr 26:0:0:0: [sr1] tag#1 CDB: opcode=0x28 28 00 00 22 f6 96 00 00 80 00
> [9273863.360116] blk_update_request: 13 callbacks suppressed
> [9273863.360177] blk_update_request: I/O error, dev sr1, sector 9165400
> [9273875.864648] sr 26:0:0:0: [sr1] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
> [9273875.864738] sr 26:0:0:0: [sr1] tag#1 Sense Key : 0x2 [current] 
> [9273875.864801] sr 26:0:0:0: [sr1] tag#1 ASC=0x8 ASCQ=0x0 
> [9273875.864890] sr 26:0:0:0: [sr1] tag#1 CDB: opcode=0x28 28 00 00 22 f7 16 00 00 80 00
> [9273875.864971] blk_update_request: I/O error, dev sr1, sector 9165912
> 
> To cause this, I mounted the dvd as seen in the first line and ran this
> command: find /cdrom2 -type f | xargs -tn1 cat > /dev/null
> I did some various tests.  Each test was done after umount and mount to
> clear the cache.
> cat <file> > /dev/null causes the message.
> dd if=<file> of=/dev/null bs=2048 doesn't
> 	using bs=4096 doesn't
> 	using bs=64k doesn't
> 	using bs=128k does
> cat uses a blocksize of 128k.
> 
> The following was done without being mounted.
> ddrescue -f -f /dev/sr1 /dev/null 
> 	doesn't cause the message
> dd if=/dev/sr1 of=/dev/null bs=128k
> 	doesn't cause the message
> using bs=256k causes the message once:
> [9275916.857409] sr 27:0:0:0: [sr1] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
> [9275916.857482] sr 27:0:0:0: [sr1] tag#0 Sense Key : 0x2 [current] 
> [9275916.857520] sr 27:0:0:0: [sr1] tag#0 ASC=0x8 ASCQ=0x0 
> [9275916.857556] sr 27:0:0:0: [sr1] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 80 00
> [9275916.857614] blk_update_request: I/O error, dev sr1, sector 0
> 
> If I access the disc from the target natively either by mounting and
> accessing files or working with the device directly (ie dd) no errors are
> logged on the target.

OK, thanks for your test.

Could you test the following patch and see if there is still the failure
message?

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 0d99b242e82e..6137287b52fb 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -913,9 +913,11 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 
 			rc = bio_add_pc_page(pdv->pdv_sd->request_queue,
 					bio, page, bytes, off);
+			if (rc != bytes)
+				goto fail;
 			pr_debug("PSCSI: bio->bi_vcnt: %d nr_vecs: %d\n",
 				bio_segments(bio), nr_vecs);
-			if (rc != bytes) {
+			if (/*rc != bytes*/0) {
 				pr_debug("PSCSI: Reached bio->bi_vcnt max:"
 					" %d i: %d bio: %p, allocating another"
 					" bio\n", bio->bi_vcnt, i, bio);

-- 
Ming