Re: [PATCH 2/4] lan78xx: Read initial EEE setting from Device Tree

[Andrew Lunn]

On Thu, Apr 12, 2018 at 02:55:34PM +0100, Phil Elwell wrote:
> Add two new Device Tree properties:
> * microchip,eee-enabled  - a boolean to enable EEE
> * microchip,tx-lpi-timer - time in microseconds to wait after TX goes
>                            idle before entering the low power state
>                            (default 600)

Hi Phil

This looks wrong.

What should happen is that the MAC driver calls phy_init_eee() to find
out if the PHY supports EEE. There should be no need to look in device
tree.

	Andrew