Re: [PATCH 3/4] lan78xx: Read LED modes from Device Tree
From: Andrew Lunn
Date: Thu Apr 12 2018 - 10:26:30 EST
On Thu, Apr 12, 2018 at 02:55:35PM +0100, Phil Elwell wrote:
> Add support for DT property "microchip,led-modes", a vector of two
> cells (u32s) in the range 0-15, each of which sets the mode for one
> of the two LEDs. Some possible values are:
>
> 0=link/activity 1=link1000/activity
> 2=link100/activity 3=link10/activity
> 4=link100/1000/activity 5=link10/1000/activity
> 6=link10/100/activity 14=off 15=on
>
> Also use the presence of the DT property to indicate that the
> LEDs should be enabled - necessary in the event that no valid OTP
> or EEPROM is available.
I'm not a fan of this, but at the moment, we don't have anything
better.
Please follow what mscc does, add a header file for the LED settings.
Andrew
>
> Signed-off-by: Phil Elwell <phil@xxxxxxxxxxxxxxx>
> ---
> drivers/net/usb/lan78xx.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> index d98397b..ffb483d 100644
> --- a/drivers/net/usb/lan78xx.c
> +++ b/drivers/net/usb/lan78xx.c
> @@ -2008,6 +2008,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
> {
> int ret;
> u32 mii_adv;
> + u32 led_modes[2];
> struct phy_device *phydev;
>
> phydev = phy_find_first(dev->mdiobus);
> @@ -2097,6 +2098,25 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
> (void)lan78xx_set_eee(dev->net, &edata);
> }
>
> + if (!of_property_read_u32_array(dev->udev->dev.of_node,
> + "microchip,led-modes",
> + led_modes, ARRAY_SIZE(led_modes))) {
> + u32 reg;
> + int i;
> +
> + reg = phy_read(phydev, 0x1d);
> + for (i = 0; i < ARRAY_SIZE(led_modes); i++) {
> + reg &= ~(0xf << (i * 4));
> + reg |= (led_modes[i] & 0xf) << (i * 4);
> + }
Please add range checks for led_modes[i] and return -EINVAL if the
check fails.
Andrew