Re: [PATCH v3 0/2] iio: add unit converter

[Jonathan Cameron]

On Wed, 11 Apr 2018 16:15:53 +0200
Peter Rosin <peda@xxxxxxxxxx> wrote:

> Hi!
> 
> I'm now following up with one more binding for the unit-converter.
> This time with a real IC, namely LT6106 from Analog Devices. It's
> a current sense amplifier. I was a but unsure if I should have
> the Rin and Rout resistors in the binding or if I instead should
> have used the "gain". In the end I went with the resistors since
> while the normal case is an integer gain, that may not always be
> the case. And when it's not, that could get tricky. But I'm open
> for arguments on that.
> 
> Cheers,
> Peter
Trivial complaint of the day - why the same title for this email
as the previous series?  Had me really confused for a minute ;)

Seems like the whole driver is stabilizing.  If we do a v4 please
pull the whole lot into one series.

Jonathan

> 
> Peter Rosin (2):
>   dt-bindings: iio: afe: add binding for adi,lt6106
>   iio: afe: unit-converter: add support for adi,lt6106
> 
>  .../devicetree/bindings/iio/afe/adi,lt6106.txt     | 50 ++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  drivers/iio/afe/Kconfig                            |  3 +-
>  drivers/iio/afe/iio-unit-converter.c               | 54 ++++++++++++++++++++++
>  4 files changed, 107 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/afe/adi,lt6106.txt
>