Re: [PATCH v7 0/4] Bluetooth: hci_qca: Add serdev support

[Marcel Holtmann]

Hi Thierry,

> This patchset enables the Qualcomm BT controller QCA6174 node in the
> device tree of the db820c board. This allows the bluetooth chipset to
> be probed and registered against the hci layer by using the serdev
> framework.
> 
> This patchset also contains the documentation for the compatible
> string "qcom,qca6174-bt" related to this chipset.
> 
> v7:
> - Add a new patch enabling regulators and gpios for the bt/wlan
>  combo chip
> 
> v6:
> - Move pinctrl properties into subnodes
> - fix binding documentation
> 
> v5:
> - Rename 'bt-disable-n' gpio as 'enable'
> 
> v4:
> - Fix dt binding documentation
> - Address some other issues in patch #3
> 
> v3:
> - Address comments for patch #3 (details in patch)
> 
> v2:
> - Fix author email
> 
> 
> Srinivas Kandagatla (1):
>  arm64: dts: apq8096-db820c: Enable wlan and bt en pins
> 
> Thierry Escande (3):
>  arm64: dts: apq8096-db820c: enable bluetooth node
>  dt-bindings: net: bluetooth: Add qualcomm-bluetooth
>  Bluetooth: hci_qca: Add serdev support
> 
> .../devicetree/bindings/net/qualcomm-bluetooth.txt |  30 ++++++
> arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi  |  26 +++++
> .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi    |  32 ++++++
> arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi       |  62 ++++++++++++
> arch/arm64/boot/dts/qcom/msm8996.dtsi              |  10 ++
> drivers/bluetooth/Kconfig                          |   1 +
> drivers/bluetooth/hci_qca.c                        | 109 ++++++++++++++++++++-
> 7 files changed, 268 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt

all 4 patches have been applied to bluetooth-next tree.

Regards

Marcel