Re: [PATCH] proc/stat: Separate out individual irq counts into /proc/stat_irqs

[Alexey Dobriyan]

On Thu, Apr 19, 2018 at 03:28:40PM -0400, Waiman Long wrote:
> On 04/19/2018 03:08 PM, Alexey Dobriyan wrote:
> >> Therefore, application performance can be impacted if the application
> >> reads /proc/stat rather frequently.
> > [nods]
> > Text interfaces can be designed in a very stupid way.
> >
> >> For example, reading /proc/stat in a certain 2-socket Skylake server
> >> took about 4.6ms because it had over 5k irqs.
> > Is this top(1)? What is this application doing?
> > If it needs percpu usage stats, then maybe /proc/stat should be
> > converted away from single_open() so that core seq_file code doesn't
> > generate everything at once.
> 
> The application is actually a database benchmarking tool used by a
> customer.

So it probably needs lines before "intr" line.

> The reading of /proc/stat is an artifact of the benchmarking
> tool that can actually be turned off. Without doing that, about 20% of
> CPU time were spent reading /proc/stat and the trashing of cachelines
> slowed the benchmark number quite significantly. However, I was also
> told that there are legitimate cases where reading /proc/stat was
> necessary in some of their applications.
> 
> >> -
> >> -	/* sum again ? it could be updated? */
> >> -	for_each_irq_nr(j)
> >> -		seq_put_decimal_ull(p, " ", kstat_irqs_usr(j));
> >> -
> > This is direct userspace breakage.
> 
> Yes, I am aware of that. That is the cost of improving the performance
> of applications that read /proc/stat, but don't need the individual irq
> counts.

Yeah, but all it takes is one script which cares.

I have an idea.

Maintain "maximum registered irq #", it should be much smaller than
"nr_irqs":

intr 4245359 151 0 0 0 0 0 0 0 38 0 0 0 0 0 0 0 0 0 64 0 0 0 0 0 0 0 0 0 0 44330 182364 57741 0 0 0 0 0 0 0 0 85 89124 0 0 0 0 0 323360 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Or maintain array of registered irqs and iterate over them only.

I have another idea.

perf record shows mutex_lock/mutex_unlock at the top.
Most of them are irq mutex not seqfile mutex as there are many more
interrupts than reads. Take it once.