Re: [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge

[Andrzej Hajda]

On 18.04.2018 16:40, Jacopo Mondi wrote:
> As I have another series which is based on this one + Eagle board display
> support, I'm re-sending this one to fix the small issue I pointed out in my
> reply to v8.
>
> Simon: no changes to Eagle DTS series, so the last one sent is still the good
> one.
>
> DRM: I have collected several reviewed-by tags both on driver and bindings.
> Can I send out incremental patches on this series and consider this one to
> be ready to be collected?

Queued to drm-misc-next.

Regards
Andrzej


>
> Thanks
>    j
>
> v8 -> v9:
> - Put 'remote' OF node after usage not just in error path during device
>   tree parsing routine
> - Add Rob's Reviewed-by tag to the device tree bindings documentation
>
> v7 -> b8:
> - Make 'vcc' supply mandatory
> - Use 'oe' property name to describe "OE" pin
> - Minor fixes as suggested by Laurent on bindings and driver
>
> v6 -> v7:
> - Use semi-standard names for powerdown and output enable GPIOs as suggested
>   by Rob and Vladimir
> - Use 'regulator_get()' not the optional version, and list only 'vcc' as
>   requested supply
> - Addressed Laurent's review comments and removed Eagle display enablement patch
>   to be sent separately
>
> v5 -> v6:
> - Drop check for CONFIG_OF as it is a Kconfig dependency
> - Add Niklas Reviewed-by tags
> - List [3/3] depenencies below commit message to ease integration
>
> v4 -> v5:
> - Fix punctuation in bindings documentation
> - Add small statement to bindings document to clarify the chip has no
>   control bus
> - Print regulator name in enable/disable routines error path
> - Add Andrzej Reviewed-by tag
>
> v3 -> v4:
> - Rename permutations of "pdwn" to just "pdwn" everywhere in the series
> - Improve power enable/disable routines as suggested by Andrzej and Sergei
> - Change "pdwn" gpio initialization to use the logical output level
> - Change Kconfig description
>
> v2 -> v3:
> - Drop support for "lvds-decoder" and make the driver THC63LVD1024 specific
> -- Rework bindings to describe multiple input/output ports
> -- Rename driver and remove "lvds-decoder" references
> -- Rework Eagle DTS to use new bindings
>
> v1 -> v2:
> - Drop support for THC63LVD1024
>
> Jacopo Mondi (2):
>   dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
>   drm: bridge: Add thc63lvd1024 LVDS decoder driver
>
>  .../bindings/display/bridge/thine,thc63lvd1024.txt |  60 ++++++
>  drivers/gpu/drm/bridge/Kconfig                     |   6 +
>  drivers/gpu/drm/bridge/Makefile                    |   1 +
>  drivers/gpu/drm/bridge/thc63lvd1024.c              | 205 +++++++++++++++++++++
>  4 files changed, 272 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
>  create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c
>
> --
> 2.7.4
>
>
>
>