[RESEND PATCH v6 05/27] drm/bridge: analogix_dp: Wait for HPD signal before configuring link

[Enric Balletbo i Serra]

From: zain wang <wzz@xxxxxxxxxxxxxx>

According to DP spec v1.3 chap 3.5.1.2 Link Training, Link Policy Maker
must first detect that the HPD signal is asserted high by the Downstream
Device before establishing a link with it.

Cc: StÃphane Marchesin <marcheu@xxxxxxxxxxxx>
Signed-off-by: zain wang <wzz@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---

 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index bf805f156272..3269deec739d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1169,6 +1169,17 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
 	if (ret)
 		goto out_dp_init;
 
+	/*
+	 * According to DP spec v1.3 chap 3.5.1.2 Link Training,
+	 * We should first make sure the HPD signal is asserted high by device
+	 * when we want to establish a link with it.
+	 */
+	ret = analogix_dp_detect_hpd(dp);
+	if (ret) {
+		DRM_ERROR("failed to get hpd single ret = %d\n", ret);
+		goto out_dp_init;
+	}
+
 	ret = analogix_dp_commit(dp);
 	if (ret)
 		goto out_dp_init;
-- 
2.17.0