Re: [PATCH v14 0/9] Address error and recovery for AER and DPC

[poza]

On 2018-04-23 20:53, Oza Pawandeep wrote:
> This patch set brings in error handling support for DPC
>
> The current implementation of AER and error message broadcasting to the
> EP driver is tightly coupled and limited to AER service driver.
> It is important to factor out broadcasting and other link handling
> callbacks. So that not only when AER gets triggered, but also when DPC 
> get
> triggered (for e.g. ERR_FATAL), callbacks are handled appropriately.
>
> The goal of the patch-set is:
> DPC should handle the error handling and recovery similar to AER, 
> because
> finally both are attempting recovery in some or the other way,
> and for that error handling and recovery framework has to be loosely
> coupled.
>
> It achieves uniformity and transparency to the error handling agents 
> such
> as AER, DPC, with respect to recovery and error handling.
>
> So, this patch-set tries to unify lot of things between error agents 
> and
> make them behave in a well defined way. (be it error (FATAL, NON_FATAL)
> handling or recovery).
>
> The FATAL error handling is handled with remove/reset_link/re-enumerate
> sequence while the NON_FATAL follows the default path.
> Documentation/PCI/pci-error-recovery.txt talks more on that.
>
> Changes since v13:
>     Bjorn's comments addressed
>     > handke FATAL errors with remove devices followed by 
> re-enumeration.
>     > changes in AER and DPC along with required Documentation.
> Changes since v12:
>     Bjorn's and Keith's Comments addressed.
>     > Made DPC and AER error handling identical <aligned err.c>
>     > hanldled cases for hotplug enabled system differently.
> Changes since v11:
>     Bjorn's comments addressed.
>     > rename pcie-err.c to err.c
>     > removed EXPORT_SYMBOL
>     > made generic find_serivce function in port driver.
>     > removed mutex patch as no need to have mutex in pcie_do_recovery
>     > brough in DPC_FATAL in aer.h
>     > so now all the error codes (AER and DPC) are unified in aer.h
> Changes since v10:
>     Christoph Hellwig's, David Laight's and Randy Dunlap's
>     comments addressed.
>         > renamed pci_do_recovery to pcie_do_recovery
>         > removed inner braces in conditional statements.
>         > restrctured the code in pci_wait_for_link
>         > EXPORT_SYMBOL_GPL
> Changes since v9:
>     Sinan's comments addressed.
>         > bool active = true; unnecessary variable removed.
> Changes since v8:
>     Fixed Kbuild errors.
> Changes since v7:
>     Rebased the code on pci master
>         > 
> https://kernel.googlesource.com/pub/scm/linux/kernel/git/helgaas/pci
> Changes since v6:
>     Sinan's and Stefan's comments implemented.
>         > reordered patch 6 and 7
>         > cleaned up
> Changes since v5:
>     Sinan's and Keith's comments incorporated.
>         > made separate patch for mutex
>         > unified error repotting codes into driver/pci/pci.h
>         > got rid of wait link active/inactive and
>           made generic function in driver/pci/pci.c
> Changes since v4:
>     Bjorn's comments incorporated.
>         > Renamed only do_recovery.
>         > moved the things more locally to drivers/pci/pci.h
> Changes since v3:
>     Bjorn's comments incorporated.
>         > Made separate patch renaming generic pci_err.c
>         > Introduce pci_err.h to contain all the error types and 
> recovery
>         > removed all the dependencies on pci.h
> Changes since v2:
>     Based on feedback from Keith:
>     "
>     When DPC is triggered due to receipt of an uncorrectable error 
> Message,
>     the Requester ID from the Message is recorded in the DPC Error
>     Source ID register and that Message is discarded and not forwarded 
> Upstream.
>     "
>     Removed the patch where AER checks if DPC service is active
> Changes since v1:
>     Kbuild errors fixed:
>         > pci_find_dpc_dev made static
>         > ras_event.h updated
>         > pci_find_aer_service call with CONFIG check
>         > pci_find_dpc_service call with CONFIG check
>
> Oza Pawandeep (9):
>   PCI/AER: Rename error recovery to generic PCI naming
>   PCI/AER: Factor out error reporting from AER
>   PCI/PORTDRV: Implement generic find service
>   PCI/PORTDRV: Implement generic find device
>   PCI/DPC: Unify and plumb error handling into DPC
>   PCI: Unify wait for link active into generic PCI
>   PCI/DPC: Disable ERR_NONFATAL for DPC
>   PCI/AER/DPC: Align FATAL error handling for AER and DPC
>   pci-error-recovery: Add AER_FATAL handling
>
>  Documentation/PCI/pci-error-recovery.txt |  35 ++-
>  drivers/pci/hotplug/pciehp_hpc.c         |  20 +-
>  drivers/pci/pci.c                        |  30 +++
>  drivers/pci/pci.h                        |   5 +
>  drivers/pci/pcie/Makefile                |   2 +-
>  drivers/pci/pcie/aer/aerdrv.c            |   2 +
>  drivers/pci/pcie/aer/aerdrv.h            |  30 ---
>  drivers/pci/pcie/aer/aerdrv_core.c       | 317 
> +-------------------------
>  drivers/pci/pcie/err.c                   | 374 
> +++++++++++++++++++++++++++++++
>  drivers/pci/pcie/pcie-dpc.c              |  63 +++---
>  drivers/pci/pcie/portdrv.h               |   4 +
>  drivers/pci/pcie/portdrv_core.c          |  69 ++++++
>  include/linux/aer.h                      |   2 +
>  include/uapi/linux/pci_regs.h            |   3 +-
>  14 files changed, 552 insertions(+), 404 deletions(-)
>  create mode 100644 drivers/pci/pcie/err.c

Hi Bjorn,

I know I need to rebase this whole patch-set to 4.17 now.

But before I do that, can you please help to comment.

Regards,
Oza.