Re: [PATCH V3] cpufreq: powernv: Fix the hardlockup by synchronus smp_call in timer interrupt

[Vaidyanathan Srinivasan]

* Shilpa Bhat <shilpa.bhat@xxxxxxxxxxxxxxxxxx> [2018-04-25 16:29:31]:

> gpstate_timer_handler() uses synchronous smp_call to set the pstate
> on the requested core. This causes the below hard lockup:
> 
> [c000003fe566b320] [c0000000001d5340] smp_call_function_single+0x110/0x180 (unreliable)
> [c000003fe566b390] [c0000000001d55e0] smp_call_function_any+0x180/0x250
> [c000003fe566b3f0] [c000000000acd3e8] gpstate_timer_handler+0x1e8/0x580
> [c000003fe566b4a0] [c0000000001b46b0] call_timer_fn+0x50/0x1c0
> [c000003fe566b520] [c0000000001b4958] expire_timers+0x138/0x1f0
> [c000003fe566b590] [c0000000001b4bf8] run_timer_softirq+0x1e8/0x270
> [c000003fe566b630] [c000000000d0d6c8] __do_softirq+0x158/0x3e4
> [c000003fe566b710] [c000000000114be8] irq_exit+0xe8/0x120
> [c000003fe566b730] [c000000000024d0c] timer_interrupt+0x9c/0xe0
> [c000003fe566b760] [c000000000009014] decrementer_common+0x114/0x120
> -- interrupt: 901 at doorbell_global_ipi+0x34/0x50
> LR = arch_send_call_function_ipi_mask+0x120/0x130
> [c000003fe566ba50] [c00000000004876c]
> arch_send_call_function_ipi_mask+0x4c/0x130
> [c000003fe566ba90] [c0000000001d59f0] smp_call_function_many+0x340/0x450
> [c000003fe566bb00] [c000000000075f18] pmdp_invalidate+0x98/0xe0
> [c000003fe566bb30] [c0000000003a1120] change_huge_pmd+0xe0/0x270
> [c000003fe566bba0] [c000000000349278] change_protection_range+0xb88/0xe40
> [c000003fe566bcf0] [c0000000003496c0] mprotect_fixup+0x140/0x340
> [c000003fe566bdb0] [c000000000349a74] SyS_mprotect+0x1b4/0x350
> [c000003fe566be30] [c00000000000b184] system_call+0x58/0x6c
> 
> One way to avoid this is removing the smp-call. We can ensure that the timer
> always runs on one of the policy-cpus. If the timer gets migrated to a
> cpu outside the policy then re-queue it back on the policy->cpus. This way
> we can get rid of the smp-call which was being used to set the pstate
> on the policy->cpus.
> 
> Fixes: 7bc54b652f13 (timers, cpufreq/powernv: Initialize the gpstate timer as pinned)
> Cc: <stable@xxxxxxxxxxxxxxx>        [4.8+]
> Reported-by: Nicholas Piggin <npiggin@xxxxxxxxx>
> Reported-by: Pridhiviraj Paidipeddi <ppaidipe@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@xxxxxxxxxxxxxxxxxx>
> ---
> Changes from V2:
> - Remove the check for active policy while requeing the migrated timer
> Changes from V1:
> - Remove smp_call in the pstate handler.
> 
>  drivers/cpufreq/powernv-cpufreq.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
> index 71f8682..e368e1f 100644
> --- a/drivers/cpufreq/powernv-cpufreq.c
> +++ b/drivers/cpufreq/powernv-cpufreq.c
> @@ -679,6 +679,16 @@ void gpstate_timer_handler(struct timer_list *t)
> 
>  	if (!spin_trylock(&gpstates->gpstate_lock))
>  		return;
> +	/*
> +	 * If the timer has migrated to the different cpu then bring
> +	 * it back to one of the policy->cpus
> +	 */
> +	if (!cpumask_test_cpu(raw_smp_processor_id(), policy->cpus)) {
> +		gpstates->timer.expires = jiffies + msecs_to_jiffies(1);
> +		add_timer_on(&gpstates->timer, cpumask_first(policy->cpus));
> +		spin_unlock(&gpstates->gpstate_lock);
> +		return;
> +	}
> 
>  	/*
>  	 * If PMCR was last updated was using fast_swtich then
> @@ -718,10 +728,8 @@ void gpstate_timer_handler(struct timer_list *t)
>  	if (gpstate_idx != gpstates->last_lpstate_idx)
>  		queue_gpstate_timer(gpstates);
> 
> +	set_pstate(&freq_data);
>  	spin_unlock(&gpstates->gpstate_lock);
> -
> -	/* Timer may get migrated to a different cpu on cpu hot unplug */
> -	smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
>  }

Fix looks good. 

Acked-by: Vaidyanathan Srinivasan <svaidy@xxxxxxxxxxxxxxxxxx>