Re: [PATCH 2/2] net: stmmac: dwmac-meson: extend phy mode setting

[Jerome Brunet]

On Thu, 2018-04-26 at 16:05 +0000, Yixun Lan wrote:
>   In the Meson-AXG SoC, the phy mode setting of PRG_ETH0 in the glue layer
> is extended from bit[0] to bit[2:0].
>   There is no problem if we configure it to the RGMII 1000M PHY mode,
> since the register setting is coincidentally compatible with previous one,
> but for the RMII 100M PHY mode, the configuration need to be changed to
> value - b100.
>   This patch was verified with a RTL8201F 100M ethernet PHY.
> 
> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx>
> ---
>  .../ethernet/stmicro/stmmac/dwmac-meson8b.c   | 95 ++++++++++++++++---
>  1 file changed, 84 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> index 7cb794094a70..e3688b6dd87c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> @@ -18,6 +18,7 @@
>  #include <linux/io.h>
>  #include <linux/ioport.h>
>  #include <linux/module.h>
> +#include <linux/of_device.h>
>  #include <linux/of_net.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/platform_device.h>
> @@ -29,6 +30,10 @@
>  
>  #define PRG_ETH0_RGMII_MODE		BIT(0)
>  
> +#define PRG_ETH0_EXT_PHY_MODE_MASK	GENMASK(2, 0)
> +#define PRG_ETH0_EXT_RGMII_MODE		1
> +#define PRG_ETH0_EXT_RMII_MODE		4
> +
>  /* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
>  #define PRG_ETH0_CLK_M250_SEL_SHIFT	4
>  #define PRG_ETH0_CLK_M250_SEL_MASK	GENMASK(4, 4)
> @@ -46,10 +51,16 @@
>  #define PRG_ETH0_TX_AND_PHY_REF_CLK	BIT(12)
>  
>  #define MUX_CLK_NUM_PARENTS		2
> +struct meson8b_dwmac_data {
> +	bool ext_phy_mode;
> +};
>  
>  struct meson8b_dwmac {
>  	struct device		*dev;
>  	void __iomem		*regs;
> +
> +	const struct meson8b_dwmac_data *data;
> +
>  	phy_interface_t		phy_mode;
>  	struct clk		*rgmii_tx_clk;
>  	u32			tx_delay_ns;
> @@ -171,6 +182,46 @@ static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
>  	return 0;
>  }
>  
> +static int meson8b_init_set_mode(struct meson8b_dwmac *dwmac)
> +{
> +	bool ext_phy_mode = dwmac->data->ext_phy_mode;
> +
> +	switch (dwmac->phy_mode) {
> +	case PHY_INTERFACE_MODE_RGMII:
> +	case PHY_INTERFACE_MODE_RGMII_RXID:
> +	case PHY_INTERFACE_MODE_RGMII_ID:
> +	case PHY_INTERFACE_MODE_RGMII_TXID:
> +		/* enable RGMII mode */
> +		if (ext_phy_mode)

Looks weird to have this if target at a specific SoC withing a function named
after another SoC

Couldn't you make one function per soc type, and pass that function pointer in
the match data ?

> +			meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> +						PRG_ETH0_EXT_PHY_MODE_MASK,
> +						PRG_ETH0_EXT_RGMII_MODE);
> +		else
> +			meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> +						PRG_ETH0_RGMII_MODE,
> +						PRG_ETH0_RGMII_MODE);
> +
> +		break;
> +	case PHY_INTERFACE_MODE_RMII:
> +		/* disable RGMII mode -> enables RMII mode */
> +		if (ext_phy_mode)
> +			meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> +						PRG_ETH0_EXT_PHY_MODE_MASK,
> +						PRG_ETH0_EXT_RMII_MODE);
> +		else
> +			meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> +						PRG_ETH0_RGMII_MODE, 0);
> +
> +		break;
> +	default:
> +		dev_err(dwmac->dev, "fail to set phy-mode %s\n",
> +			phy_modes(dwmac->phy_mode));
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
>  static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
>  {
>  	int ret;
> @@ -188,10 +239,6 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
>  
>  	case PHY_INTERFACE_MODE_RGMII_ID:
>  	case PHY_INTERFACE_MODE_RGMII_TXID:
> -		/* enable RGMII mode */
> -		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
> -					PRG_ETH0_RGMII_MODE);
> -
>  		/* only relevant for RMII mode -> disable in RGMII mode */
>  		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
>  					PRG_ETH0_INVERTED_RMII_CLK, 0);
> @@ -224,10 +271,6 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
>  		break;
>  
>  	case PHY_INTERFACE_MODE_RMII:
> -		/* disable RGMII mode -> enables RMII mode */
> -		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
> -					0);
> -
>  		/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
>  		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
>  					PRG_ETH0_INVERTED_RMII_CLK,
> @@ -274,6 +317,11 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
>  		goto err_remove_config_dt;
>  	}
>  
> +	dwmac->data = (const struct meson8b_dwmac_data *)
> +		of_device_get_match_data(&pdev->dev);
> +	if (!dwmac->data)
> +		return -EINVAL;
> +
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>  	dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
>  	if (IS_ERR(dwmac->regs)) {
> @@ -298,6 +346,10 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_remove_config_dt;
>  
> +	ret = meson8b_init_set_mode(dwmac);
> +	if (ret)
> +		goto err_remove_config_dt;
> +
>  	ret = meson8b_init_prg_eth(dwmac);
>  	if (ret)
>  		goto err_remove_config_dt;
> @@ -316,10 +368,31 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> +static const struct meson8b_dwmac_data meson8b_dwmac_data = {
> +	.ext_phy_mode = false,
> +};
> +
> +static const struct meson8b_dwmac_data meson_axg_dwmac_data = {
> +	.ext_phy_mode = true,
> +};
> +
>  static const struct of_device_id meson8b_dwmac_match[] = {
> -	{ .compatible = "amlogic,meson8b-dwmac" },
> -	{ .compatible = "amlogic,meson8m2-dwmac" },
> -	{ .compatible = "amlogic,meson-gxbb-dwmac" },
> +	{
> +		.compatible = "amlogic,meson8b-dwmac",
> +		.data = &meson8b_dwmac_data,
> +	},
> +	{
> +		.compatible = "amlogic,meson8m2-dwmac",
> +		.data = &meson8b_dwmac_data,
> +	},
> +	{
> +		.compatible = "amlogic,meson-gxbb-dwmac",
> +		.data = &meson8b_dwmac_data,
> +	},
> +	{
> +		.compatible = "amlogic,meson-axg-dwmac",
> +		.data = &meson_axg_dwmac_data,
> +	},
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);