Re: [PATCH v4 6/8] drm/panel: Add Ilitek ILI9881c panel driver

From: Thierry Reding
Date: Thu Apr 26 2018 - 11:07:22 EST

Next message: Pandruvada, Srinivas: "Re: issues with suspend on Dell XPS 13 2-in-1"
Previous message: Michel DÃnzer: "[PATCH 2/2] drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Apr 04, 2018 at 11:57:14AM +0200, Maxime Ripard wrote:
> The LHR050H41 panel is the panel shipped with the BananaPi M2-Magic, and is
> based on the Ilitek ILI9881c Controller. Add a driver for it, modelled
> after the other Ilitek controller drivers.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 +-
> drivers/gpu/drm/panel/Makefile | 1 +-
> drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 489 +++++++++++++++++++-
> 3 files changed, 499 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 25682ff3449a..6020c30a33b3 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -46,6 +46,15 @@ config DRM_PANEL_ILITEK_IL9322
> Say Y here if you want to enable support for Ilitek IL9322
> QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
>
> +config DRM_PANEL_ILITEK_ILI9881C
> + tristate "Ilitek ILI9881C-based panels"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y if you want to enable support for panels based on the
> + Ilitek ILI9881c controller.
> +
> config DRM_PANEL_INNOLUX_P079ZCA
> tristate "Innolux P079ZCA panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index f26efc11d746..5ccaaa9d13af 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
> obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
> obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
> +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
> obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
> obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> new file mode 100644
> index 000000000000..8992a6431c30
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> @@ -0,0 +1,489 @@
> +// SPDX-License-Identifier: GPL-2.0+

This isn't a valid SPDX license specifier. The module license is GPL v2,
so the corresponding specifier would be: GPL-2.0-only.

> +/*
> + * Copyright (C) 2017, Free Electrons

-2018?

> + * Author: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>

No need for this, it's already in MODULE_AUTHOR.

> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/fb.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include <linux/gpio/consumer.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#include <video/mipi_display.h>
> +
> +struct ili9881c {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> +
> + struct backlight_device *backlight;
> + struct gpio_desc *power;
> + struct gpio_desc *reset;
> +};
> +
> +enum ili9881c_op {
> + ILI9881C_SWITCH_PAGE,
> + ILI9881C_COMMAND,
> +};
> +
> +struct ili9881c_instr {
> + enum ili9881c_op op;
> +
> + union arg {
> + struct cmd {
> + u8 cmd;
> + u8 data;
> + } cmd;
> + u8 page;
> + } arg;
> +};
> +
> +#define ILI9881C_SWITCH_PAGE_INSTR(_page) \
> + { \
> + .op = ILI9881C_SWITCH_PAGE, \
> + .arg = { \
> + .page = (_page), \
> + }, \
> + }
> +
> +#define ILI9881C_COMMAND_INSTR(_cmd, _data) \
> + { \
> + .op = ILI9881C_COMMAND, \
> + .arg = { \
> + .cmd = { \
> + .cmd = (_cmd), \
> + .data = (_data), \
> + }, \
> + }, \
> + }
> +
> +static struct ili9881c_instr ili9881c_init[] = {

These are never modified, so they could be const, right?

> + ILI9881C_SWITCH_PAGE_INSTR(3),
> + ILI9881C_COMMAND_INSTR(0x01, 0x00),
> + ILI9881C_COMMAND_INSTR(0x02, 0x00),
> + ILI9881C_COMMAND_INSTR(0x03, 0x73),
> + ILI9881C_COMMAND_INSTR(0x04, 0x03),
> + ILI9881C_COMMAND_INSTR(0x05, 0x00),
> + ILI9881C_COMMAND_INSTR(0x06, 0x06),
> + ILI9881C_COMMAND_INSTR(0x07, 0x06),
> + ILI9881C_COMMAND_INSTR(0x08, 0x00),
> + ILI9881C_COMMAND_INSTR(0x09, 0x18),
> + ILI9881C_COMMAND_INSTR(0x0a, 0x04),
> + ILI9881C_COMMAND_INSTR(0x0b, 0x00),
> + ILI9881C_COMMAND_INSTR(0x0c, 0x02),
> + ILI9881C_COMMAND_INSTR(0x0d, 0x03),
> + ILI9881C_COMMAND_INSTR(0x0e, 0x00),
> + ILI9881C_COMMAND_INSTR(0x0f, 0x25),
> + ILI9881C_COMMAND_INSTR(0x10, 0x25),
> + ILI9881C_COMMAND_INSTR(0x11, 0x00),
> + ILI9881C_COMMAND_INSTR(0x12, 0x00),
> + ILI9881C_COMMAND_INSTR(0x13, 0x00),
> + ILI9881C_COMMAND_INSTR(0x14, 0x00),
> + ILI9881C_COMMAND_INSTR(0x15, 0x00),
> + ILI9881C_COMMAND_INSTR(0x16, 0x0C),
> + ILI9881C_COMMAND_INSTR(0x17, 0x00),
> + ILI9881C_COMMAND_INSTR(0x18, 0x00),
> + ILI9881C_COMMAND_INSTR(0x19, 0x00),
> + ILI9881C_COMMAND_INSTR(0x1a, 0x00),
> + ILI9881C_COMMAND_INSTR(0x1b, 0x00),
> + ILI9881C_COMMAND_INSTR(0x1c, 0x00),
> + ILI9881C_COMMAND_INSTR(0x1d, 0x00),
> + ILI9881C_COMMAND_INSTR(0x1e, 0xC0),
> + ILI9881C_COMMAND_INSTR(0x1f, 0x80),
> + ILI9881C_COMMAND_INSTR(0x20, 0x04),
> + ILI9881C_COMMAND_INSTR(0x21, 0x01),
> + ILI9881C_COMMAND_INSTR(0x22, 0x00),
> + ILI9881C_COMMAND_INSTR(0x23, 0x00),
> + ILI9881C_COMMAND_INSTR(0x24, 0x00),
> + ILI9881C_COMMAND_INSTR(0x25, 0x00),
> + ILI9881C_COMMAND_INSTR(0x26, 0x00),
> + ILI9881C_COMMAND_INSTR(0x27, 0x00),
> + ILI9881C_COMMAND_INSTR(0x28, 0x33),
> + ILI9881C_COMMAND_INSTR(0x29, 0x03),
> + ILI9881C_COMMAND_INSTR(0x2a, 0x00),
> + ILI9881C_COMMAND_INSTR(0x2b, 0x00),
> + ILI9881C_COMMAND_INSTR(0x2c, 0x00),
> + ILI9881C_COMMAND_INSTR(0x2d, 0x00),
> + ILI9881C_COMMAND_INSTR(0x2e, 0x00),
> + ILI9881C_COMMAND_INSTR(0x2f, 0x00),
> + ILI9881C_COMMAND_INSTR(0x30, 0x00),
> + ILI9881C_COMMAND_INSTR(0x31, 0x00),
> + ILI9881C_COMMAND_INSTR(0x32, 0x00),
> + ILI9881C_COMMAND_INSTR(0x33, 0x00),
> + ILI9881C_COMMAND_INSTR(0x34, 0x04),
> + ILI9881C_COMMAND_INSTR(0x35, 0x00),
> + ILI9881C_COMMAND_INSTR(0x36, 0x00),
> + ILI9881C_COMMAND_INSTR(0x37, 0x00),
> + ILI9881C_COMMAND_INSTR(0x38, 0x3C),
> + ILI9881C_COMMAND_INSTR(0x39, 0x00),
> + ILI9881C_COMMAND_INSTR(0x3a, 0x00),
> + ILI9881C_COMMAND_INSTR(0x3b, 0x00),
> + ILI9881C_COMMAND_INSTR(0x3c, 0x00),
> + ILI9881C_COMMAND_INSTR(0x3d, 0x00),
> + ILI9881C_COMMAND_INSTR(0x3e, 0x00),
> + ILI9881C_COMMAND_INSTR(0x3f, 0x00),
> + ILI9881C_COMMAND_INSTR(0x40, 0x00),
> + ILI9881C_COMMAND_INSTR(0x41, 0x00),
> + ILI9881C_COMMAND_INSTR(0x42, 0x00),
> + ILI9881C_COMMAND_INSTR(0x43, 0x00),
> + ILI9881C_COMMAND_INSTR(0x44, 0x00),
> + ILI9881C_COMMAND_INSTR(0x50, 0x01),
> + ILI9881C_COMMAND_INSTR(0x51, 0x23),
> + ILI9881C_COMMAND_INSTR(0x52, 0x45),
> + ILI9881C_COMMAND_INSTR(0x53, 0x67),
> + ILI9881C_COMMAND_INSTR(0x54, 0x89),
> + ILI9881C_COMMAND_INSTR(0x55, 0xab),
> + ILI9881C_COMMAND_INSTR(0x56, 0x01),
> + ILI9881C_COMMAND_INSTR(0x57, 0x23),
> + ILI9881C_COMMAND_INSTR(0x58, 0x45),
> + ILI9881C_COMMAND_INSTR(0x59, 0x67),
> + ILI9881C_COMMAND_INSTR(0x5a, 0x89),
> + ILI9881C_COMMAND_INSTR(0x5b, 0xab),
> + ILI9881C_COMMAND_INSTR(0x5c, 0xcd),
> + ILI9881C_COMMAND_INSTR(0x5d, 0xef),
> + ILI9881C_COMMAND_INSTR(0x5e, 0x11),
> + ILI9881C_COMMAND_INSTR(0x5f, 0x02),
> + ILI9881C_COMMAND_INSTR(0x60, 0x02),
> + ILI9881C_COMMAND_INSTR(0x61, 0x02),
> + ILI9881C_COMMAND_INSTR(0x62, 0x02),
> + ILI9881C_COMMAND_INSTR(0x63, 0x02),
> + ILI9881C_COMMAND_INSTR(0x64, 0x02),
> + ILI9881C_COMMAND_INSTR(0x65, 0x02),
> + ILI9881C_COMMAND_INSTR(0x66, 0x02),
> + ILI9881C_COMMAND_INSTR(0x67, 0x02),
> + ILI9881C_COMMAND_INSTR(0x68, 0x02),
> + ILI9881C_COMMAND_INSTR(0x69, 0x02),
> + ILI9881C_COMMAND_INSTR(0x6a, 0x0C),
> + ILI9881C_COMMAND_INSTR(0x6b, 0x02),
> + ILI9881C_COMMAND_INSTR(0x6c, 0x0F),
> + ILI9881C_COMMAND_INSTR(0x6d, 0x0E),
> + ILI9881C_COMMAND_INSTR(0x6e, 0x0D),
> + ILI9881C_COMMAND_INSTR(0x6f, 0x06),
> + ILI9881C_COMMAND_INSTR(0x70, 0x07),
> + ILI9881C_COMMAND_INSTR(0x71, 0x02),
> + ILI9881C_COMMAND_INSTR(0x72, 0x02),
> + ILI9881C_COMMAND_INSTR(0x73, 0x02),
> + ILI9881C_COMMAND_INSTR(0x74, 0x02),
> + ILI9881C_COMMAND_INSTR(0x75, 0x02),
> + ILI9881C_COMMAND_INSTR(0x76, 0x02),
> + ILI9881C_COMMAND_INSTR(0x77, 0x02),
> + ILI9881C_COMMAND_INSTR(0x78, 0x02),
> + ILI9881C_COMMAND_INSTR(0x79, 0x02),
> + ILI9881C_COMMAND_INSTR(0x7a, 0x02),
> + ILI9881C_COMMAND_INSTR(0x7b, 0x02),
> + ILI9881C_COMMAND_INSTR(0x7c, 0x02),
> + ILI9881C_COMMAND_INSTR(0x7d, 0x02),
> + ILI9881C_COMMAND_INSTR(0x7e, 0x02),
> + ILI9881C_COMMAND_INSTR(0x7f, 0x02),
> + ILI9881C_COMMAND_INSTR(0x80, 0x0C),
> + ILI9881C_COMMAND_INSTR(0x81, 0x02),
> + ILI9881C_COMMAND_INSTR(0x82, 0x0F),
> + ILI9881C_COMMAND_INSTR(0x83, 0x0E),
> + ILI9881C_COMMAND_INSTR(0x84, 0x0D),
> + ILI9881C_COMMAND_INSTR(0x85, 0x06),
> + ILI9881C_COMMAND_INSTR(0x86, 0x07),
> + ILI9881C_COMMAND_INSTR(0x87, 0x02),
> + ILI9881C_COMMAND_INSTR(0x88, 0x02),
> + ILI9881C_COMMAND_INSTR(0x89, 0x02),
> + ILI9881C_COMMAND_INSTR(0x8A, 0x02),
> + ILI9881C_SWITCH_PAGE_INSTR(4),
> + ILI9881C_COMMAND_INSTR(0x6C, 0x15),
> + ILI9881C_COMMAND_INSTR(0x6E, 0x22),
> + ILI9881C_COMMAND_INSTR(0x6F, 0x33),
> + ILI9881C_COMMAND_INSTR(0x3A, 0xA4),
> + ILI9881C_COMMAND_INSTR(0x8D, 0x0D),
> + ILI9881C_COMMAND_INSTR(0x87, 0xBA),
> + ILI9881C_COMMAND_INSTR(0x26, 0x76),
> + ILI9881C_COMMAND_INSTR(0xB2, 0xD1),
> + ILI9881C_SWITCH_PAGE_INSTR(1),
> + ILI9881C_COMMAND_INSTR(0x22, 0x0A),
> + ILI9881C_COMMAND_INSTR(0x53, 0xDC),
> + ILI9881C_COMMAND_INSTR(0x55, 0xA7),
> + ILI9881C_COMMAND_INSTR(0x50, 0x78),
> + ILI9881C_COMMAND_INSTR(0x51, 0x78),
> + ILI9881C_COMMAND_INSTR(0x31, 0x02),
> + ILI9881C_COMMAND_INSTR(0x60, 0x14),
> + ILI9881C_COMMAND_INSTR(0xA0, 0x2A),
> + ILI9881C_COMMAND_INSTR(0xA1, 0x39),
> + ILI9881C_COMMAND_INSTR(0xA2, 0x46),
> + ILI9881C_COMMAND_INSTR(0xA3, 0x0e),
> + ILI9881C_COMMAND_INSTR(0xA4, 0x12),
> + ILI9881C_COMMAND_INSTR(0xA5, 0x25),
> + ILI9881C_COMMAND_INSTR(0xA6, 0x19),
> + ILI9881C_COMMAND_INSTR(0xA7, 0x1d),
> + ILI9881C_COMMAND_INSTR(0xA8, 0xa6),
> + ILI9881C_COMMAND_INSTR(0xA9, 0x1C),
> + ILI9881C_COMMAND_INSTR(0xAA, 0x29),
> + ILI9881C_COMMAND_INSTR(0xAB, 0x85),
> + ILI9881C_COMMAND_INSTR(0xAC, 0x1C),
> + ILI9881C_COMMAND_INSTR(0xAD, 0x1B),
> + ILI9881C_COMMAND_INSTR(0xAE, 0x51),
> + ILI9881C_COMMAND_INSTR(0xAF, 0x22),
> + ILI9881C_COMMAND_INSTR(0xB0, 0x2d),
> + ILI9881C_COMMAND_INSTR(0xB1, 0x4f),
> + ILI9881C_COMMAND_INSTR(0xB2, 0x59),
> + ILI9881C_COMMAND_INSTR(0xB3, 0x3F),
> + ILI9881C_COMMAND_INSTR(0xC0, 0x2A),
> + ILI9881C_COMMAND_INSTR(0xC1, 0x3a),
> + ILI9881C_COMMAND_INSTR(0xC2, 0x45),
> + ILI9881C_COMMAND_INSTR(0xC3, 0x0e),
> + ILI9881C_COMMAND_INSTR(0xC4, 0x11),
> + ILI9881C_COMMAND_INSTR(0xC5, 0x24),
> + ILI9881C_COMMAND_INSTR(0xC6, 0x1a),
> + ILI9881C_COMMAND_INSTR(0xC7, 0x1c),
> + ILI9881C_COMMAND_INSTR(0xC8, 0xaa),
> + ILI9881C_COMMAND_INSTR(0xC9, 0x1C),
> + ILI9881C_COMMAND_INSTR(0xCA, 0x29),
> + ILI9881C_COMMAND_INSTR(0xCB, 0x96),
> + ILI9881C_COMMAND_INSTR(0xCC, 0x1C),
> + ILI9881C_COMMAND_INSTR(0xCD, 0x1B),
> + ILI9881C_COMMAND_INSTR(0xCE, 0x51),
> + ILI9881C_COMMAND_INSTR(0xCF, 0x22),
> + ILI9881C_COMMAND_INSTR(0xD0, 0x2b),
> + ILI9881C_COMMAND_INSTR(0xD1, 0x4b),
> + ILI9881C_COMMAND_INSTR(0xD2, 0x59),
> + ILI9881C_COMMAND_INSTR(0xD3, 0x3F),
> +};
> +
> +static inline struct ili9881c *panel_to_ili9881c(struct drm_panel *panel)
> +{
> + return container_of(panel, struct ili9881c, panel);
> +}
> +
> +static int ili9881c_switch_page(struct ili9881c *ctx, u8 page)
> +{
> + u8 buf[4] = { 0xff, 0x98, 0x81, page };
> + int ret;
> +
> + ret = mipi_dsi_dcs_write_buffer(ctx->dsi, buf, sizeof(buf));
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int ili9881c_send_cmd_data(struct ili9881c *ctx, u8 cmd, u8 data)
> +{
> + u8 buf[2] = { cmd, data };
> + int ret;
> +
> + ret = mipi_dsi_dcs_write_buffer(ctx->dsi, buf, sizeof(buf));
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}

According to this you're sending DCS commands, but none of the above
look like valid DCS commands. Do you know what's going on here? Also,
can you include a reference to a datasheet where these instructions
come from?

Thierry

> +
> +static int ili9881c_prepare(struct drm_panel *panel)
> +{
> + struct ili9881c *ctx = panel_to_ili9881c(panel);
> + unsigned int i;
> + int ret;
> +
> + /* Power the panel */
> + gpiod_set_value(ctx->power, 1);
> + msleep(5);
> +
> + /* And reset it */
> + gpiod_set_value(ctx->reset, 1);
> + msleep(20);
> +
> + gpiod_set_value(ctx->reset, 0);
> + msleep(20);
> +
> + for (i = 0; i < ARRAY_SIZE(ili9881c_init); i++) {
> + struct ili9881c_instr *instr = &ili9881c_init[i];
> +
> + if (instr->op == ILI9881C_SWITCH_PAGE)
> + ret = ili9881c_switch_page(ctx, instr->arg.page);
> + else if (instr->op == ILI9881C_COMMAND)
> + ret = ili9881c_send_cmd_data(ctx, instr->arg.cmd.cmd,
> + instr->arg.cmd.data);
> +
> + if (ret)
> + return ret;
> + }
> +
> + ret = ili9881c_switch_page(ctx, 0);
> + if (ret)
> + return ret;
> +
> + ret = mipi_dsi_dcs_set_tear_on(ctx->dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + if (ret)
> + return ret;
> +
> + mipi_dsi_dcs_exit_sleep_mode(ctx->dsi);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int ili9881c_enable(struct drm_panel *panel)
> +{
> + struct ili9881c *ctx = panel_to_ili9881c(panel);
> +
> + msleep(120);
> +
> + mipi_dsi_dcs_set_display_on(ctx->dsi);
> + backlight_enable(ctx->backlight);
> +
> + return 0;
> +}
> +
> +static int ili9881c_disable(struct drm_panel *panel)
> +{
> + struct ili9881c *ctx = panel_to_ili9881c(panel);
> +
> + backlight_disable(ctx->backlight);
> + return mipi_dsi_dcs_set_display_off(ctx->dsi);
> +}
> +
> +static int ili9881c_unprepare(struct drm_panel *panel)
> +{
> + struct ili9881c *ctx = panel_to_ili9881c(panel);
> +
> + mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
> + gpiod_set_value(ctx->power, 0);
> + gpiod_set_value(ctx->reset, 1);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> + .clock = 62000,
> + .vrefresh = 60,
> +
> + .hdisplay = 720,
> + .hsync_start = 720 + 10,
> + .hsync_end = 720 + 10 + 20,
> + .htotal = 720 + 10 + 20 + 30,
> +
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 10,
> + .vsync_end = 1280 + 10 + 10,
> + .vtotal = 1280 + 10 + 10 + 20,
> +};
> +
> +static int ili9881c_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct ili9881c *ctx = panel_to_ili9881c(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &default_mode);
> + if (!mode) {
> + dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + default_mode.vrefresh);
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(connector, mode);
> +
> + panel->connector->display_info.width_mm = 62;
> + panel->connector->display_info.height_mm = 110;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs ili9881c_funcs = {
> + .prepare = ili9881c_prepare,
> + .unprepare = ili9881c_unprepare,
> + .enable = ili9881c_enable,
> + .disable = ili9881c_disable,
> + .get_modes = ili9881c_get_modes,
> +};
> +
> +static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device_node *np;
> + struct ili9881c *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> + mipi_dsi_set_drvdata(dsi, ctx);
> + ctx->dsi = dsi;
> +
> + drm_panel_init(&ctx->panel);
> + ctx->panel.dev = &dsi->dev;
> + ctx->panel.funcs = &ili9881c_funcs;
> +
> + ctx->power = devm_gpiod_get(&dsi->dev, "power", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->power)) {
> + dev_err(&dsi->dev, "Couldn't get our power GPIO\n");
> + return PTR_ERR(ctx->power);
> + }
> +
> + ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset)) {
> + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
> + return PTR_ERR(ctx->reset);
> + }
> +
> + np = of_parse_phandle(dsi->dev.of_node, "backlight", 0);
> + if (np) {
> + ctx->backlight = of_find_backlight_by_node(np);
> + of_node_put(np);
> +
> + if (!ctx->backlight)
> + return -EPROBE_DEFER;
> + }
> +
> + ret = drm_panel_add(&ctx->panel);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->lanes = 4;
> +
> + return mipi_dsi_attach(dsi);
> +}
> +
> +static int ili9881c_dsi_remove(struct mipi_dsi_device *dsi)
> +{
> + struct ili9881c *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_panel_remove(&ctx->panel);
> +
> + if (ctx->backlight)
> + put_device(&ctx->backlight->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ili9881c_of_match[] = {
> + { .compatible = "bananapi,lhr050h41" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ili9881c_of_match);
> +
> +static struct mipi_dsi_driver ili9881c_dsi_driver = {
> + .probe = ili9881c_dsi_probe,
> + .remove = ili9881c_dsi_remove,
> + .driver = {
> + .name = "ili9881c-dsi",
> + .of_match_table = ili9881c_of_match,
> + },
> +};
> +module_mipi_dsi_driver(ili9881c_dsi_driver);
> +
> +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Ilitek ILI9881C Controller Driver");
> +MODULE_LICENSE("GPL v2");
> --
> git-series 0.9.1

Attachment: signature.asc
Description: PGP signature

Next message: Pandruvada, Srinivas: "Re: issues with suspend on Dell XPS 13 2-in-1"
Previous message: Michel DÃnzer: "[PATCH 2/2] drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]