Re: [PATCH v9 24/27] dt-bindings: timer: new bindings for TI DaVinci timer

[Rob Herring]

On Thu, Apr 26, 2018 at 07:17:42PM -0500, David Lechner wrote:
> This adds new device tree bindings for the timer IP block of TI
> DaVinci-like SoCs.
> 
> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
> ---
> 
> v9 changes:
> - new patch in v9
> 
> 
>  .../bindings/timer/ti,davinci-timer.txt       | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
> new file mode 100644
> index 000000000000..2091eca46981
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
> @@ -0,0 +1,24 @@
> +* Device tree bindings for Texas Instruments DaVinci timer
> +
> +This document provides bindings for the 64-bit timer in the DaVinci
> +architecture devices. The timer can be configured as a general-purpose 64-bit
> +timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
> +timers, each half can operate in conjunction (chain mode) or independently
> +(unchained mode) of each other.
> +
> +It is global timer is a free running up-counter and can generate interrupt

Doesn't make sense, too many 'is'.

There's no interrupt property listed.

> +when the counter reaches preset counter values.
> +
> +Required properties:
> +
> +- compatible : should be "ti,davinci-timer".
> +- reg : specifies base physical address and count of the registers.
> +- clocks : the clock feeding the timer clock.
> +
> +Example:
> +
> +	clocksource: timer@20000 {
> +		compatible = "ti,davinci-timer";
> +		reg = <0x20000 0x1000>;
> +		clocks = <&pll0_auxclk>;
> +	};
> -- 
> 2.17.0
>