[RFC net-next 4/5] net: phy: Add support for IEEE standard test modes
From: Florian Fainelli
Date: Fri Apr 27 2018 - 20:34:37 EST
Add support for the 100BaseT2 and 1000BaseT standard test modes as
defined by the IEEE 802.3-2012-Section two and three. We provide a set
of helper functions for PHY drivers to either punt entirely onto
genphy_* functions or if they desire, build additional tests on top of
the standard ones available.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/net/phy/Kconfig | 6 ++
drivers/net/phy/Makefile | 4 +-
drivers/net/phy/phy-tests.c | 159 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 22 ++++++
4 files changed, 190 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/phy/phy-tests.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index edb8b9ab827f..ef3f2f1ae990 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -200,6 +200,12 @@ config LED_TRIGGER_PHY
<Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
for any speed known to the PHY.
+config CONFIG_PHYLIB_TEST_MODES
+ bool "Support for test modes"
+ ---help---
+ Selecting this option will allow the PHY library to support
+ test modes: electrical, cable diagnostics, pattern generator etc.
+
comment "MII PHY device drivers"
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 701ca0b8717e..e9905432e164 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,7 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for Linux PHY drivers and MDIO bus drivers
-libphy-y := phy.o phy-c45.o phy-core.o phy_device.o
+libphy-y := phy.o phy-c45.o phy-core.o phy_device.o \
+ phy-tests.o
mdio-bus-y += mdio_bus.o mdio_device.o
ifdef CONFIG_MDIO_DEVICE
@@ -18,6 +19,7 @@ obj-$(CONFIG_MDIO_DEVICE) += mdio-bus.o
endif
libphy-$(CONFIG_SWPHY) += swphy.o
libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
+libphy-$(CONFIG_PHYLIB_TEST_MODES) += phy-tests.o
obj-$(CONFIG_PHYLINK) += phylink.o
obj-$(CONFIG_PHYLIB) += libphy.o
diff --git a/drivers/net/phy/phy-tests.c b/drivers/net/phy/phy-tests.c
new file mode 100644
index 000000000000..5709d7821925
--- /dev/null
+++ b/drivers/net/phy/phy-tests.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/* PHY library common test modes
+ */
+#include <linux/export.h>
+#include <linux/phy.h>
+
+/* genphy_get_test - Get PHY test specific data
+ * @phydev: the PHY device instance
+ * @test: the desired test mode
+ * @data: test specific data (none)
+ */
+int genphy_get_test(struct phy_device *phydev, struct ethtool_phy_test *test,
+ u8 *data)
+{
+ if (test->mode >= PHY_STD_TEST_MODE_MAX)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_get_test);
+
+/* genphy_set_test - Make a PHY enter one of the standard IEEE defined
+ * test modes
+ * @phydev: the PHY device instance
+ * @test: the desired test mode
+ * @data: test specific data (none)
+ *
+ * This function makes the designated @phydev enter the desired standard
+ * 100BaseT2 or 1000BaseT test mode as defined in IEEE 802.3-2012 section TWO
+ * and THREE under 32.6.1.2.1 and 40.6.1.1.2 respectively
+ */
+int genphy_set_test(struct phy_device *phydev,
+ struct ethtool_phy_test *test, const u8 *data)
+{
+ u16 shift, base, bmcr = 0;
+ int ret;
+
+ /* Exit test mode */
+ if (test->mode == PHY_STD_TEST_MODE_NORMAL) {
+ ret = phy_read(phydev, MII_CTRL1000);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~GENMASK(15, 13);
+
+ return phy_write(phydev, MII_CTRL1000, ret);
+ }
+
+ switch (test->mode) {
+ case PHY_STD_TEST_MODE_100BASET2_1:
+ case PHY_STD_TEST_MODE_100BASET2_2:
+ case PHY_STD_TEST_MODE_100BASET2_3:
+ if (!(phydev->supported & PHY_100BT_FEATURES))
+ return -EOPNOTSUPP;
+
+ shift = 14;
+ base = test->mode - PHY_STD_TEST_MODE_NORMAL;
+ bmcr = BMCR_SPEED100;
+ break;
+
+ case PHY_STD_TEST_MODE_1000BASET_1:
+ case PHY_STD_TEST_MODE_1000BASET_2:
+ case PHY_STD_TEST_MODE_1000BASET_3:
+ case PHY_STD_TEST_MODE_1000BASET_4:
+ if (!(phydev->supported & PHY_1000BT_FEATURES))
+ return -EOPNOTSUPP;
+
+ shift = 13;
+ base = test->mode - PHY_STD_TEST_MODE_100BASET2_MAX;
+ bmcr = BMCR_SPEED1000;
+ break;
+
+ default:
+ /* Let an upper driver deal with additional modes it may
+ * support
+ */
+ return -EOPNOTSUPP;
+ }
+
+ /* Force speed and duplex */
+ ret = phy_write(phydev, MII_BMCR, bmcr | BMCR_FULLDPLX);
+ if (ret < 0)
+ return ret;
+
+ /* Set the desired test mode bit */
+ return phy_write(phydev, MII_CTRL1000, (test->mode + base) << shift);
+}
+EXPORT_SYMBOL_GPL(genphy_set_test);
+
+static const char *const phy_std_test_mode_str[] = {
+ "normal",
+ "100baseT2-tx-waveform",
+ "100baseT2-tx-jitter",
+ "100baseT2-tx-idle",
+ "1000baseT-tx-waveform",
+ "1000baseT-tx-jitter-master",
+ "1000baseT-tx-jitter-slave",
+ "1000BaseT-tx-distorsion"
+};
+
+/* genphy_get_test_count - Get PHY test count
+ * @phydev: the PHY device instance
+ *
+ * Returns the number of supported test modes for this PHY
+ */
+int genphy_get_test_count(struct phy_device *phydev)
+{
+ return ARRAY_SIZE(phy_std_test_mode_str);
+}
+EXPORT_SYMBOL_GPL(genphy_get_test_count);
+
+/* genphy_get_test_len - Return the amount of test specific data given
+ * a specific test mode
+ * @phydev: the PHY device instance
+ * @mode: the desired test mode
+ */
+int genphy_get_test_len(struct phy_device *phydev, u32 mode)
+{
+ switch (mode) {
+ case PHY_STD_TEST_MODE_NORMAL:
+ case PHY_STD_TEST_MODE_100BASET2_1:
+ case PHY_STD_TEST_MODE_100BASET2_2:
+ case PHY_STD_TEST_MODE_100BASET2_3:
+ case PHY_STD_TEST_MODE_1000BASET_1:
+ case PHY_STD_TEST_MODE_1000BASET_2:
+ case PHY_STD_TEST_MODE_1000BASET_3:
+ case PHY_STD_TEST_MODE_1000BASET_4:
+ /* no test specific data */
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL_GPL(genphy_get_test_len);
+
+/* genphy_get_test_strings - Obtain the PHY device supported test modes
+ * text representations
+ * @phydev: the PHY device instance
+ * @data: buffer to store strings
+ */
+void genphy_get_test_strings(struct phy_device *phydev, u8 *data)
+{
+ unsigned int i;
+
+ if (!(phydev->supported & PHY_100BT_FEATURES))
+ return;
+
+ for (i = 0; i < PHY_STD_TEST_MODE_100BASET2_MAX; i++)
+ strlcpy(data + i * ETH_GSTRING_LEN,
+ phy_std_test_mode_str[i], ETH_GSTRING_LEN);
+
+ if (!(phydev->supported & PHY_1000BT_FEATURES))
+ return;
+
+ for (; i < PHY_STD_TEST_MODE_MAX; i++)
+ strlcpy(data + i * ETH_GSTRING_LEN,
+ phy_std_test_mode_str[i], ETH_GSTRING_LEN);
+}
+EXPORT_SYMBOL_GPL(genphy_get_test_strings);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 449afde7ca7c..7155187cf268 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -165,6 +165,20 @@ static inline const char *phy_modes(phy_interface_t interface)
}
}
+enum phy_std_test_mode {
+ /* Normal operation - disables test mode */
+ PHY_STD_TEST_MODE_NORMAL = 0,
+ PHY_STD_TEST_MODE_100BASET2_1,
+ PHY_STD_TEST_MODE_100BASET2_2,
+ PHY_STD_TEST_MODE_100BASET2_3,
+ PHY_STD_TEST_MODE_100BASET2_MAX = PHY_STD_TEST_MODE_100BASET2_3,
+ PHY_STD_TEST_MODE_1000BASET_1,
+ PHY_STD_TEST_MODE_1000BASET_2,
+ PHY_STD_TEST_MODE_1000BASET_3,
+ PHY_STD_TEST_MODE_1000BASET_4,
+ PHY_STD_TEST_MODE_MAX,
+ /* PHY drivers can implement their own test modes after that value */
+};
#define PHY_INIT_TIMEOUT 100000
#define PHY_STATE_TIME 1
@@ -997,6 +1011,14 @@ int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad,
int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
u16 regnum, u16 val);
+int genphy_get_test(struct phy_device *phydev, struct ethtool_phy_test *t,
+ u8 *data);
+int genphy_set_test(struct phy_device *phydev, struct ethtool_phy_test *t,
+ const u8 *data);
+int genphy_get_test_count(struct phy_device *phydev);
+void genphy_get_test_strings(struct phy_device *phydev, u8 *data);
+int genphy_get_test_len(struct phy_device *phydev, u32 mode);
+
/* Clause 45 PHY */
int genphy_c45_restart_aneg(struct phy_device *phydev);
int genphy_c45_aneg_done(struct phy_device *phydev);
--
2.14.1