[PATCH v7 04/24] ASoC: qdsp6: dt-bindings: Add q6afe dt bindings

From: Srinivas Kandagatla
Date: Tue May 01 2018 - 08:10:46 EST


This patch add DT bindings for AFE (Audio Frontend) DSP module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Reviewed-and-tested-by: Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/sound/qcom,q6afe.txt | 104 +++++++++++++++++++++
include/dt-bindings/sound/qcom,q6afe.h | 31 ++++++
2 files changed, 135 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6afe.txt
create mode 100644 include/dt-bindings/sound/qcom,q6afe.h

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
new file mode 100644
index 000000000000..14335a08b963
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -0,0 +1,104 @@
+Qualcomm Audio Front End (Q6AFE) binding
+
+AFE is one of the APR audio service on Q6DSP
+Please refer to qcom,apr.txt for details of the common apr service bindings
+used by all apr services. Must contain the following properties.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>"
+ Or "qcom,q6afe" where the version number can be queried
+ from DSP.
+ example "qcom,q6afe"
+
+= AFE DAIs (Digial Audio Interface)
+"dais" subnode of the AFE node. It represents afe dais, each afe dai is a
+subnode of "dais" representing board specific dai setup.
+"dais" node should have following properties followed by dai children.
+
+- #sound-dai-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 1
+
+- #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 1
+
+- #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 0
+
+== AFE DAI is subnode of "dais" and represent a dai, it includes board specific
+configuration of each dai. Must contain the following properties.
+
+- reg
+ Usage: required
+ Value type: <u32>
+ Definition: Must be dai id
+
+- qcom,sd-lines
+ Usage: required for mi2s interface
+ Value type: <prop-encoded-array>
+ Definition: Must be list of serial data lines used by this dai.
+ should be one or more of the 1-4 sd lines.
+
+= EXAMPLE
+
+q6afe@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+
+ dais {
+ #sound-dai-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi@1 {
+ reg = <1>;
+ };
+
+ prim-mi2s-rx@16 {
+ reg = <16>;
+ qcom,sd-lines = <1 3>;
+ };
+
+ prim-mi2s-tx@17 {
+ reg = <17>;
+ qcom,sd-lines = <2>;
+ };
+
+ sec-mi2s-rx@18 {
+ reg = <18>;
+ qcom,sd-lines = <1 4>;
+ };
+
+ sec-mi2s-tx@19 {
+ reg = <19>;
+ qcom,sd-lines = <2>;
+ };
+
+ tert-mi2s-rx@20 {
+ reg = <20>;
+ qcom,sd-lines = <2 4>;
+ };
+
+ tert-mi2s-tx@21 {
+ reg = <21>;
+ qcom,sd-lines = <1>;
+ };
+
+ quat-mi2s-rx@22 {
+ reg = <22>;
+ qcom,sd-lines = <1>;
+ };
+
+ quat-mi2s-tx@23 {
+ reg = <23>;
+ qcom,sd-lines = <2>;
+ };
+ };
+};
diff --git a/include/dt-bindings/sound/qcom,q6afe.h b/include/dt-bindings/sound/qcom,q6afe.h
new file mode 100644
index 000000000000..e162045f5dc9
--- /dev/null
+++ b/include/dt-bindings/sound/qcom,q6afe.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_Q6_AFE_H__
+#define __DT_BINDINGS_Q6_AFE_H__
+
+/* Audio Front End (AFE) virtual ports IDs */
+#define HDMI_RX 1
+#define SLIMBUS_0_RX 2
+#define SLIMBUS_0_TX 3
+#define SLIMBUS_1_RX 4
+#define SLIMBUS_1_TX 5
+#define SLIMBUS_2_RX 6
+#define SLIMBUS_2_TX 7
+#define SLIMBUS_3_RX 8
+#define SLIMBUS_3_TX 9
+#define SLIMBUS_4_RX 10
+#define SLIMBUS_4_TX 11
+#define SLIMBUS_5_RX 12
+#define SLIMBUS_5_TX 13
+#define SLIMBUS_6_RX 14
+#define SLIMBUS_6_TX 15
+#define PRIMARY_MI2S_RX 16
+#define PRIMARY_MI2S_TX 17
+#define SECONDARY_MI2S_RX 18
+#define SECONDARY_MI2S_TX 19
+#define TERTIARY_MI2S_RX 20
+#define TERTIARY_MI2S_TX 21
+#define QUATERNARY_MI2S_RX 22
+#define QUATERNARY_MI2S_TX 23
+
+#endif /* __DT_BINDINGS_Q6_AFE_H__ */
+
--
2.16.2