[PATCH v7 05/24] ASoC: qdsp6: dt-bindings: Add q6adm dt bindings

[Srinivas Kandagatla]

This patch add DT bindings for ADM (Audio Device Manager) DSP module.
This module implements mixer controls to setup the connections between
AFE ports and ASM streams.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Reviewed-and-tested-by: Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../devicetree/bindings/sound/qcom,q6adm.txt       | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6adm.txt

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
new file mode 100644
index 000000000000..cb709e5dbc44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -0,0 +1,33 @@
+Qualcomm Audio Device Manager (Q6ADM) binding
+
+Q6ADM is one of the APR audio service on Q6DSP.
+Please refer to qcom,apr.txt for details of the coommon apr service bindings
+used by the apr service device.
+
+- but must contain the following property:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
+		   Or "qcom,q6adm" where the version number can be queried
+		   from DSP.
+		   example "qcom,q6adm-v2.0"
+
+
+= ADM routing
+"routing" subnode of the ADM node represents adm routing specific configuration
+
+- #sound-dai-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 0
+
+= EXAMPLE
+q6adm@8 {
+	compatible = "qcom,q6adm";
+	reg = <APR_SVC_ADM>;
+	q6routing: routing {
+		#sound-dai-cells = <0>;
+	};
+};
-- 
2.16.2