Re: [v4.17-rcx] Lost IBPB, IBRS_FW support for spectre_v2 mitigation.
From: JÃrg Otte
Date: Wed May 02 2018 - 03:43:40 EST
2018-05-01 22:14 GMT+02:00 Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>:
> On Tue, May 1, 2018 at 5:59 AM Thomas Gleixner <tglx@xxxxxxxxxxxxx> wrote:
>
>> Then I really have no idea how reverting the patch you pointed out would
>> fix it.
>
> So I do think that the original patch is buggy.
>
> What I think *may* be going on is:
>
> - first we do that
>
> get_cpu_cap(c);
> get_cpu_address_sizes(c);
>
> but at that point, CPU levels may be masked, and that 0x80000008 leaf
> isn't seen
>
> - then we do
>
> if (this_cpu->c_early_init)
> this_cpu->c_early_init(c);
>
> which calls early_init_intel(), which does that
>
> if (msr_clear_bit(MSR_IA32_MISC_ENABLE,
> MSR_IA32_MISC_ENABLE_LIMIT_CPUID_BIT) >
> 0) {
>
> which now raises the cpuid_level.
>
> - then we do
>
> get_cpu_cap(c);
>
> again, because the cpuid level has been raised, and _now_ it used to get
> that 0x80000008 leaf information.
>
> But with the change, that second call to get_cpu_cap() didn't do anything,
> because the 0x80000008 leaf handling had been moved away.
>
> However, I agree that your patch to just do that CPUID_8000_0008_EBX in
> get_cpu_cap() should have fixed it, and it's possible that JÃrg mis-tested
> it.
>
> JÃrg, are you sure you didn't somehow get the wrong microcode? Because
> another way for those bits to be cleared again is if
> bad_spectre_microcode() triggers. That should show up in dmesg as "Intel
> Spectre v2 broken microcode detected" though.
>
> Linus
I downloaded microcode from Intel.
Here are the excerpts from dmesg:
With revert:
jojo@fichte:~$ dmesg | grep -i -e spec -e micro -e "Linux version"
[ 0.000000] microcode: microcode updated early to revision 0x24,
date = 2018-01-21
[ 0.000000] Linux version 4.17.0-rc3-revert-00001-gcb1069f
(jojo@fichte) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubu
dmesg | grep -i -e spec -e micro -e "Linux version"
[ 0.000000] microcode: microcode updated early to revision 0x24,
date = 2018-01-21
[ 0.000000] Linux version 4.17.0-rc3-patch-00001-gdc10603
(jojo@fichte) (gcc version 5.4.0 20160609 (Ubuntu
5.4.0-6ubuntu1~16.04.9)) #20 SMP Wed May 2 09:08:07 CEST 2018
[ 0.028417] Spectre V2 : Mitigation: Full generic retpoline
[ 0.491803] microcode: sig=0x306c3, pf=0x10, revision=0x24
[ 0.491831] microcode: Microcode Update Driver: v2.2.ntu1~16.04.9))
#21 SMP Wed May 2 09:14:29 CEST 2018
[ 0.028414] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028415] Spectre V2 : Spectre v2 mitigation: Enabling Indirect
Branch Prediction Barrier
[ 0.028415] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.500157] microcode: sig=0x306c3, pf=0x10, revision=0x24
[ 0.500183] microcode: Microcode Update Driver: v2.2.
With patch:
dmesg | grep -i -e spec -e micro -e "Linux version"
[ 0.000000] microcode: microcode updated early to revision 0x24,
date = 2018-01-21
[ 0.000000] Linux version 4.17.0-rc3-patch-00001-gdc10603
(jojo@fichte) (gcc version 5.4.0 20160609 (Ubuntu
5.4.0-6ubuntu1~16.04.9)) #20 SMP Wed May 2 09:08:07 CEST 2018
[ 0.028417] Spectre V2 : Mitigation: Full generic retpoline
[ 0.491803] microcode: sig=0x306c3, pf=0x10, revision=0x24
[ 0.491831] microcode: Microcode Update Driver: v2.2.
Thanks, JÃrg