[PATCH] mtd: rawnand: marvell: pass ms delay to wait_op
From: Chris Packham
Date: Wed May 02 2018 - 22:21:53 EST
marvell_nfc_wait_op() expects the delay to be expressed in milliseconds
but nand_sdr_timings uses picoseconds. Use PSEC_TO_MSEC when passing
tPROG_max to marvell_nfc_wait_op().
Fixes: 02f26ecf8c772 ("mtd: nand: add reworked Marvell NAND controller driver")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
drivers/mtd/nand/raw/marvell_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 1d779a35ac8e..e4b964fd40d8 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -1074,7 +1074,7 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip,
return ret;
ret = marvell_nfc_wait_op(chip,
- chip->data_interface.timings.sdr.tPROG_max);
+ PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max));
return ret;
}
@@ -1494,7 +1494,7 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct mtd_info *mtd,
}
ret = marvell_nfc_wait_op(chip,
- chip->data_interface.timings.sdr.tPROG_max);
+ PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max));
marvell_nfc_disable_hw_ecc(chip);
--
2.17.0