[RESEND PATCH] pinctrl: rockchip: Disable interrupt when changing it's capability

From: Jeffy Chen
Date: Thu May 03 2018 - 02:56:18 EST


We saw spurious irq when changing irq's trigger type, for example
setting gpio-keys's wakeup irq trigger type.

And according to the TRM:
"Programming the GPIO registers for interrupt capability, edge-sensitive
or level-sensitive interrupts, and interrupt polarity should be
completed prior to enabling the interrupts on Port A in order to prevent
spurious glitches on the interrupt lines to the interrupt controller."

Reported-by: Brian Norris <briannorris@xxxxxxxxxx>
Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
---

drivers/pinctrl/pinctrl-rockchip.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 3924779f55785..7ff45ec8330d1 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -2727,9 +2727,19 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
return -EINVAL;
}

+ /**
+ * According to the TRM, we should keep irq disabled during programming
+ * interrupt capability to prevent spurious glitches on the interrupt
+ * lines to the interrupt controller.
+ */
+ data = readl(bank->reg_base + GPIO_INTEN);
+ writel_relaxed(data & ~mask, gc->reg_base + GPIO_INTEN);
+
writel_relaxed(level, gc->reg_base + GPIO_INTTYPE_LEVEL);
writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY);

+ writel_relaxed(data, gc->reg_base + GPIO_INTEN);
+
irq_gc_unlock(gc);
raw_spin_unlock_irqrestore(&bank->slock, flags);
clk_disable(bank->clk);
--
2.11.0