Re: [PATCH v1 2/3] ARM: dts: stm32: add cec pins to stm32mp157c

[Alexandre Torgue]

Hi Yannick

On 04/24/2018 09:54 AM, yannick fertre wrote:
> This patch adds cec support on stm32mp157c eval board.
>
> Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxx>
> ---
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++++++++
>   1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> index 6f044100..67b0349 100644
> --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> @@ -14,6 +14,15 @@
>   			ranges = <0 0x50002000 0xa400>;
>   			pins-are-numbered;
>   
> +			cec_pins_a: cec@0 {
> +				pins {
> +					pinmux = <STM32_PINMUX('A', 15, AF4)>;
> +					bias-disable;
> +					drive-open-drain;
> +					slew-rate = <0>;
> +				};
> +			};
> +
>   			gpioa: gpio@50002000 {
>   				gpio-controller;
>   				#gpio-cells = <2>;
Next time, please put pins group after gpio controller and don't use 
cec@0 but cec-0 to declare pins group. I'll change it this time during 
merge.

Thanks
Alex