[PATCH v1 0/2] Add QCOM video clock controller driver

[Amit Nischal]

Changes in v1:
   https://lkml.org/lkml/2018/4/24/545
Addressed below review comments given by Rob
- Change the compatible property as per '<vendor>,<soc>-<block>' format.
- Add header definitions for resets and power-domain cells.

This patch series adds a driver and device tree documentation binding
for the video clock controller on some Qualcomm Technologies, Inc, SoCs
such as SDM845. This would allow video drivers to probe and control their
clocks.

The video clock driver depends upon the RPMh driver[1], command DB driver[2],
RPMh clock driver[3], rcg2 shared ops[4] and GCC clock driver[5] changes
which are undergoing review.

[1]: https://lkml.org/lkml/2018/4/19/914
[2]: https://lkml.org/lkml/2018/4/5/451
[3]: https://lkml.org/lkml/2018/4/24/390
[4]: https://lkml.org/lkml/2018/4/18/367
[5]: https://lkml.org/lkml/2018/4/30/533

Amit Nischal (2):
  dt-bindings: clock: Introduce QCOM Video clock controller bindings
  clk: qcom: Add video clock controller driver for SDM845

 .../devicetree/bindings/clock/qcom,videocc.txt     |  18 ++
 drivers/clk/qcom/Kconfig                           |  11 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/videocc-sdm845.c                  | 358 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,videocc-sdm845.h    |  25 ++
 5 files changed, 413 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,videocc.txt
 create mode 100644 drivers/clk/qcom/videocc-sdm845.c
 create mode 100644 include/dt-bindings/clock/qcom,videocc-sdm845.h

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation