Re: [PATCH 1/2] dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()

From: Baolin Wang
Date: Fri May 04 2018 - 04:06:25 EST

Next message: Kishon Vijay Abraham I: "Re: [PATCH 0/3] K2G: mmc: Update mmc dt node to use sdhci-omap"
Previous message: Paul Kocialkowski: "Re: [PATCH v2 03/10] videobuf2-core: Add helper to get buffer private data from media request"
In reply to: Baolin Wang: "Re: [PATCH 2/2] dmaengine: sprd: Add Spreadtrum DMA configuration"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Sorry, add Vinod new email.

On 4 May 2018 at 16:01, Baolin Wang <baolin.wang@xxxxxxxxxx> wrote:
> From: Eric Long <eric.long@xxxxxxxxxxxxxx>
>
> This is one preparation patch, we can use default DMA configuration to
> implement the device_prep_dma_memcpy() interface instead of issuing
> sprd_dma_config().
>
> We will implement one new sprd_dma_config() function with introducing
> device_prep_slave_sg() interface in following patch. So we can remove
> the obsolete sprd_dma_config() firstly.
>
> Signed-off-by: Eric Long <eric.long@xxxxxxxxxxxxxx>
> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
> ---
> drivers/dma/sprd-dma.c | 154 ++++++++++--------------------------------------
> 1 file changed, 32 insertions(+), 122 deletions(-)
>
> diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
> index ccdeb8f..a7a89fd 100644
> --- a/drivers/dma/sprd-dma.c
> +++ b/drivers/dma/sprd-dma.c
> @@ -552,147 +552,57 @@ static void sprd_dma_issue_pending(struct dma_chan *chan)
> spin_unlock_irqrestore(&schan->vc.lock, flags);
> }
>
> -static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,
> - dma_addr_t dest, dma_addr_t src, size_t len)
> +static struct dma_async_tx_descriptor *
> +sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
> + size_t len, unsigned long flags)
> {
> - struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);
> - struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;
> - u32 datawidth, src_step, des_step, fragment_len;
> - u32 block_len, req_mode, irq_mode, transcation_len;
> - u32 fix_mode = 0, fix_en = 0;
> + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> + struct sprd_dma_desc *sdesc;
> + struct sprd_dma_chn_hw *hw;
> + enum sprd_dma_datawidth datawidth;
> + u32 step;
>
> - if (IS_ALIGNED(len, 4)) {
> - datawidth = SPRD_DMA_DATAWIDTH_4_BYTES;
> - src_step = SPRD_DMA_WORD_STEP;
> - des_step = SPRD_DMA_WORD_STEP;
> - } else if (IS_ALIGNED(len, 2)) {
> - datawidth = SPRD_DMA_DATAWIDTH_2_BYTES;
> - src_step = SPRD_DMA_SHORT_STEP;
> - des_step = SPRD_DMA_SHORT_STEP;
> - } else {
> - datawidth = SPRD_DMA_DATAWIDTH_1_BYTE;
> - src_step = SPRD_DMA_BYTE_STEP;
> - des_step = SPRD_DMA_BYTE_STEP;
> - }
> + sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
> + if (!sdesc)
> + return NULL;
>
> - fragment_len = SPRD_DMA_MEMCPY_MIN_SIZE;
> - if (len <= SPRD_DMA_BLK_LEN_MASK) {
> - block_len = len;
> - transcation_len = 0;
> - req_mode = SPRD_DMA_BLK_REQ;
> - irq_mode = SPRD_DMA_BLK_INT;
> - } else {
> - block_len = SPRD_DMA_MEMCPY_MIN_SIZE;
> - transcation_len = len;
> - req_mode = SPRD_DMA_TRANS_REQ;
> - irq_mode = SPRD_DMA_TRANS_INT;
> - }
> + hw = &sdesc->chn_hw;
>
> hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
> + hw->intc = SPRD_DMA_TRANS_INT | SPRD_DMA_CFG_ERR_INT_EN;
> + hw->src_addr = (u32)(src & SPRD_DMA_LOW_ADDR_MASK);
> + hw->des_addr = (u32)(dest & SPRD_DMA_LOW_ADDR_MASK);
> hw->wrap_ptr = (u32)((src >> SPRD_DMA_HIGH_ADDR_OFFSET) &
> SPRD_DMA_HIGH_ADDR_MASK);
> hw->wrap_to = (u32)((dest >> SPRD_DMA_HIGH_ADDR_OFFSET) &
> SPRD_DMA_HIGH_ADDR_MASK);
>
> - hw->src_addr = (u32)(src & SPRD_DMA_LOW_ADDR_MASK);
> - hw->des_addr = (u32)(dest & SPRD_DMA_LOW_ADDR_MASK);
> -
> - if ((src_step != 0 && des_step != 0) || (src_step | des_step) == 0) {
> - fix_en = 0;
> + if (IS_ALIGNED(len, 8)) {
> + datawidth = SPRD_DMA_DATAWIDTH_8_BYTES;
> + step = SPRD_DMA_DWORD_STEP;
> + } else if (IS_ALIGNED(len, 4)) {
> + datawidth = SPRD_DMA_DATAWIDTH_4_BYTES;
> + step = SPRD_DMA_WORD_STEP;
> + } else if (IS_ALIGNED(len, 2)) {
> + datawidth = SPRD_DMA_DATAWIDTH_2_BYTES;
> + step = SPRD_DMA_SHORT_STEP;
> } else {
> - fix_en = 1;
> - if (src_step)
> - fix_mode = 1;
> - else
> - fix_mode = 0;
> + datawidth = SPRD_DMA_DATAWIDTH_1_BYTE;
> + step = SPRD_DMA_BYTE_STEP;
> }
>
> hw->frg_len = datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET |
> datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET |
> - req_mode << SPRD_DMA_REQ_MODE_OFFSET |
> - fix_mode << SPRD_DMA_FIX_SEL_OFFSET |
> - fix_en << SPRD_DMA_FIX_EN_OFFSET |
> - (fragment_len & SPRD_DMA_FRG_LEN_MASK);
> - hw->blk_len = block_len & SPRD_DMA_BLK_LEN_MASK;
> -
> - hw->intc = SPRD_DMA_CFG_ERR_INT_EN;
> -
> - switch (irq_mode) {
> - case SPRD_DMA_NO_INT:
> - break;
> -
> - case SPRD_DMA_FRAG_INT:
> - hw->intc |= SPRD_DMA_FRAG_INT_EN;
> - break;
> -
> - case SPRD_DMA_BLK_INT:
> - hw->intc |= SPRD_DMA_BLK_INT_EN;
> - break;
> + SPRD_DMA_TRANS_REQ << SPRD_DMA_REQ_MODE_OFFSET |
> + (len & SPRD_DMA_FRG_LEN_MASK);
> + hw->blk_len = len & SPRD_DMA_BLK_LEN_MASK;
> + hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK;
>
> - case SPRD_DMA_BLK_FRAG_INT:
> - hw->intc |= SPRD_DMA_BLK_INT_EN | SPRD_DMA_FRAG_INT_EN;
> - break;
> -
> - case SPRD_DMA_TRANS_INT:
> - hw->intc |= SPRD_DMA_TRANS_INT_EN;
> - break;
> -
> - case SPRD_DMA_TRANS_FRAG_INT:
> - hw->intc |= SPRD_DMA_TRANS_INT_EN | SPRD_DMA_FRAG_INT_EN;
> - break;
> -
> - case SPRD_DMA_TRANS_BLK_INT:
> - hw->intc |= SPRD_DMA_TRANS_INT_EN | SPRD_DMA_BLK_INT_EN;
> - break;
> -
> - case SPRD_DMA_LIST_INT:
> - hw->intc |= SPRD_DMA_LIST_INT_EN;
> - break;
> -
> - case SPRD_DMA_CFGERR_INT:
> - hw->intc |= SPRD_DMA_CFG_ERR_INT_EN;
> - break;
> -
> - default:
> - dev_err(sdev->dma_dev.dev, "invalid irq mode\n");
> - return -EINVAL;
> - }
> -
> - if (transcation_len == 0)
> - hw->trsc_len = block_len & SPRD_DMA_TRSC_LEN_MASK;
> - else
> - hw->trsc_len = transcation_len & SPRD_DMA_TRSC_LEN_MASK;
> -
> - hw->trsf_step = (des_step & SPRD_DMA_TRSF_STEP_MASK) <<
> + hw->trsf_step = (step & SPRD_DMA_TRSF_STEP_MASK) <<
> SPRD_DMA_DEST_TRSF_STEP_OFFSET |
> - (src_step & SPRD_DMA_TRSF_STEP_MASK) <<
> + (step & SPRD_DMA_TRSF_STEP_MASK) <<
> SPRD_DMA_SRC_TRSF_STEP_OFFSET;
>
> - hw->frg_step = 0;
> - hw->src_blk_step = 0;
> - hw->des_blk_step = 0;
> - hw->src_blk_step = 0;
> - return 0;
> -}
> -
> -static struct dma_async_tx_descriptor *
> -sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
> - size_t len, unsigned long flags)
> -{
> - struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> - struct sprd_dma_desc *sdesc;
> - int ret;
> -
> - sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
> - if (!sdesc)
> - return NULL;
> -
> - ret = sprd_dma_config(chan, sdesc, dest, src, len);
> - if (ret) {
> - kfree(sdesc);
> - return NULL;
> - }
> -
> return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
> }
>
> --
> 1.7.9.5
>

--
Baolin.wang
Best Regards

Next message: Kishon Vijay Abraham I: "Re: [PATCH 0/3] K2G: mmc: Update mmc dt node to use sdhci-omap"
Previous message: Paul Kocialkowski: "Re: [PATCH v2 03/10] videobuf2-core: Add helper to get buffer private data from media request"
In reply to: Baolin Wang: "Re: [PATCH 2/2] dmaengine: sprd: Add Spreadtrum DMA configuration"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]