Re: [PATCH v5 2/7] phy: qcom-qmp: Enable pipe_clk before PHY initialization

[Doug Anderson]

Hi,

On Wed, May 2, 2018 at 2:06 PM, Manu Gautam <mgautam@xxxxxxxxxxxxxx> wrote:
> QMP PHY for USB/PCIE requires pipe_clk for locking of
> retime buffers at the pipe interface. Driver checks for
> PHY_STATUS without enabling pipe_clk due to which
> phy_init() fails with initialization timeout.
> Though pipe_clk is output from PHY (after PLL is programmed
> during initialization sequence) to GCC clock_ctl and then fed
> back to PHY but for PHY_STATUS register to reflect successful
> initialization pipe_clk from GCC must be present.
> Since, clock driver now ignores status_check for pipe_clk on
> clk_enable/disable, driver can safely enable/disable pipe_clk
> from phy_init/exit.
>
> Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 22 ++++++++--------------
>  1 file changed, 8 insertions(+), 14 deletions(-)

Given the agreement with Stephen Boyd that we'll just BRANCH_HALT_SKIP
for now, this all looks good to me.

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>