[PATCH v3 4/5] dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.

[Enric Balletbo i Serra]

In ATF we already wait for DDR DVFS finish, so move the interrupts properties
to be optional.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---

Changes in v3:
- [4/6] Move interrupts to be optional instead of remove.

Changes in v2:
- [4/6] Add Reviewed-by Chanwoo Choi.

 .../devicetree/bindings/devfreq/rk3399_dmc.txt         | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index 834637c7bae7..90e2b6310b6e 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -5,10 +5,6 @@ Required properties:
 - devfreq-events:	 Node to get DDR loading, Refer to
 			 Documentation/devicetree/bindings/devfreq/event/
 			 rockchip-dfi.txt
-- interrupts:		 The CPU interrupt number. The interrupt specifier
-			 format depends on the interrupt controller.
-			 It should be a DCF interrupt. When DDR DVFS finishes
-			 a DCF interrupt is triggered.
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
@@ -17,6 +13,12 @@ Required properties:
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.
 
+Optional properties:
+- interrupts:		 The CPU interrupt number. The interrupt specifier
+			 format depends on the interrupt controller.
+			 It should be a DCF interrupt. When DDR DVFS finishes
+			 a DCF interrupt is triggered.
+
 Following properties relate to DDR timing:
 
 - rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
-- 
2.17.0