[PATCH] x86-64/Xen: fix stack switching
From: Jan Beulich
Date: Mon May 07 2018 - 07:55:54 EST
While on native entry into the kernel happens on the trampoline stack,
PV Xen kernels are being entered with the current thread stack right
away. Hence source and destination stacks are identical in that case,
and special care is needed.
Other than in sync_regs() the copying done on the INT80 path as well as
on the NMI path itself isn't NMI / #MC safe, as either of these events
occurring in the middle of the stack copying would clobber data on the
(source) stack. (Of course, in the NMI case only #MC could break
things.)
I'm not altering the similar code in interrupt_entry(), as that code
path is unreachable when running an PV Xen guest afaict.
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
Cc: stable@xxxxxxxxxx
---
There would certainly have been the option of using alternatives
patching, but afaict the patching code isn't NMI / #MC safe, so I'd
rather stay away from patching the NMI path. And I thought it would be
better to use similar code in both cases.
Another option would be to make the Xen case match the native one, by
going through the trampoline stack, but to me this would look like extra
overhead for no gain.
---
arch/x86/entry/entry_64.S | 8 ++++++++
arch/x86/entry/entry_64_compat.S | 8 +++++++-
2 files changed, 15 insertions(+), 1 deletion(-)
--- 4.17-rc4/arch/x86/entry/entry_64.S
+++ 4.17-rc4-x86_64-stack-switch-Xen/arch/x86/entry/entry_64.S
@@ -1399,6 +1399,12 @@ ENTRY(nmi)
swapgs
cld
SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx
+
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rdx
+ subq $8, %rdx
+ xorq %rsp, %rdx
+ shrq $PAGE_SHIFT, %rdx
+ jz .Lnmi_keep_stack
movq %rsp, %rdx
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
UNWIND_HINT_IRET_REGS base=%rdx offset=8
@@ -1408,6 +1414,8 @@ ENTRY(nmi)
pushq 2*8(%rdx) /* pt_regs->cs */
pushq 1*8(%rdx) /* pt_regs->rip */
UNWIND_HINT_IRET_REGS
+.Lnmi_keep_stack:
+
pushq $-1 /* pt_regs->orig_ax */
PUSH_AND_CLEAR_REGS rdx=(%rdx)
ENCODE_FRAME_POINTER
--- 4.17-rc4/arch/x86/entry/entry_64_compat.S
+++ 4.17-rc4-x86_64-stack-switch-Xen/arch/x86/entry/entry_64_compat.S
@@ -356,15 +356,21 @@ ENTRY(entry_INT80_compat)
/* Need to switch before accessing the thread stack. */
SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi
+
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rdi
+ subq $8, %rdi
+ xorq %rsp, %rdi
+ shrq $PAGE_SHIFT, %rdi
+ jz .Lint80_keep_stack
movq %rsp, %rdi
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
-
pushq 6*8(%rdi) /* regs->ss */
pushq 5*8(%rdi) /* regs->rsp */
pushq 4*8(%rdi) /* regs->eflags */
pushq 3*8(%rdi) /* regs->cs */
pushq 2*8(%rdi) /* regs->ip */
pushq 1*8(%rdi) /* regs->orig_ax */
+.Lint80_keep_stack:
pushq (%rdi) /* pt_regs->di */
pushq %rsi /* pt_regs->si */