[PATCH 1/2] serial: imx: cleanup imx_uart_disable_dma()

From: Sebastian Reichel
Date: Mon May 07 2018 - 17:36:30 EST


Remove unrelated CTSC/CTS disabling from imx_uart_disable_dma() and
move it to imx_uart_shutdown(), which is the only user of the DMA
disabling function. This should not change the driver's behaviour,
but improves readability. After this change imx_uart_disable_dma()
does the reverse thing of imx_uart_enable_dma().

Suggested-by: Nandor Han <nandor.han@xxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/imx.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index c2fc6bef7a6f..3ca767b1162a 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1291,18 +1291,13 @@ static void imx_uart_enable_dma(struct imx_port *sport)

static void imx_uart_disable_dma(struct imx_port *sport)
{
- u32 ucr1, ucr2;
+ u32 ucr1;

/* clear UCR1 */
ucr1 = imx_uart_readl(sport, UCR1);
ucr1 &= ~(UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN);
imx_uart_writel(sport, ucr1, UCR1);

- /* clear UCR2 */
- ucr2 = imx_uart_readl(sport, UCR2);
- ucr2 &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
- imx_uart_writel(sport, ucr2, UCR2);
-
imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);

sport->dma_is_enabled = 0;
@@ -1447,7 +1442,7 @@ static void imx_uart_shutdown(struct uart_port *port)

spin_lock_irqsave(&sport->port.lock, flags);
ucr2 = imx_uart_readl(sport, UCR2);
- ucr2 &= ~(UCR2_TXEN | UCR2_ATEN);
+ ucr2 &= ~(UCR2_TXEN | UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
imx_uart_writel(sport, ucr2, UCR2);
spin_unlock_irqrestore(&sport->port.lock, flags);

--
2.17.0