Re: [PATCH v3 2/2] usb: dwc2: fix isoc split in transfer with no data

[Doug Anderson]

Hi,

On Mon, May 7, 2018 at 8:07 PM, William Wu <william.wu@xxxxxxxxxxxxxx> wrote:
> If isoc split in transfer with no data (the length of DATA0
> packet is zero), we can't simply return immediately. Because
> the DATA0 can be the first transaction or the second transaction
> for the isoc split in transaction. If the DATA0 packet with no
> data is in the first transaction, we can return immediately.
> But if the DATA0 packet with no data is in the second transaction
> of isoc split in transaction sequence, we need to increase the
> qtd->isoc_frame_index and giveback urb to device driver if needed,
> otherwise, the MDATA packet will be lost.
>
> A typical test case is that connect the dwc2 controller with an
> usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics
> headset) into the downstream port of Hub. Then use the usb mic
> to record, we can find noise when playback.
>
> In the case, the isoc split in transaction sequence like this:
>
> - SSPLIT IN transaction
> - CSPLIT IN transaction
>   - MDATA packet (176 bytes)
> - CSPLIT IN transaction
>   - DATA0 packet (0 byte)
>
> This patch use both the length of DATA0 and qtd->isoc_split_offset
> to check if the DATA0 is in the second transaction.
>
> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
> ---
> Changes in v3:
> - Remove "qtd->isoc_split_offset = 0" in the if test
>
> Changes in v2:
> - Modify the commit message
>
>  drivers/usb/dwc2/hcd_intr.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
> index ba6fd852..3003594 100644
> --- a/drivers/usb/dwc2/hcd_intr.c
> +++ b/drivers/usb/dwc2/hcd_intr.c
> @@ -930,9 +930,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
>         frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
>         len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
>                                           DWC2_HC_XFER_COMPLETE, NULL);
> -       if (!len) {
> +       if (!len && !qtd->isoc_split_offset) {
>                 qtd->complete_split = 0;
> -               qtd->isoc_split_offset = 0;
>                 return 0;
>         }

This looks fine to me now, but as per my comments on the previous
version I don't think I've dug through this problem enough to add my
Reviewed-by tag.  I'll assume that John or someone with more knowledge
of the USB protocol than I have will Review / Ack.


-Doug