[PATCH 0/8] Tegra Combined UART driver
From: Mikko Perttunen
Date: Tue May 08 2018 - 07:51:41 EST
Hi all,
on Tegra194, the primary console UART is the "Tegra Combined UART",
or TCU. This is a "virtual UART", where each consumer communicates
with a central implementation over mailboxes. The central
implementation then multiplexes the streams and arbitrates use of
a hardware serial port. This driver implements the consumer portion
to allow using the primary console.
The series is split into the following parts:
* patches 1 and 2 add the device tree bindings for mailbox and tcu
itself.
* patch 3 adds a blocking transmission option to the mailbox
framework.
* patches 4 and 5 add support for the "shared mailbox" primitive
to the Tegra HSP driver.
* patch 6 adds the TCU driver itself
* patches 7 and 8 do the necessary device tree changes.
The series has been tested on the Tegra194 P2972 board.
Thanks,
Mikko
Mikko Perttunen (8):
dt-bindings: tegra186-hsp: Add shared interrupts
dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
mailbox: Add transmit done by blocking option
mailbox: tegra-hsp: Refactor in preparation of mailboxes
mailbox: tegra-hsp: Add support for shared mailboxes
serial: Add Tegra Combined UART driver
arm64: tegra: Add nodes for tcu on Tegra194
arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888
.../bindings/mailbox/nvidia,tegra186-hsp.txt | 2 +
.../bindings/serial/nvidia,tegra194-tcu.txt | 35 +++
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 34 ++-
drivers/mailbox/mailbox.c | 30 +-
drivers/mailbox/mailbox.h | 1 +
drivers/mailbox/tegra-hsp.c | 320 +++++++++++++++++----
drivers/tty/serial/Kconfig | 9 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/tegra-tcu.c | 302 +++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
11 files changed, 671 insertions(+), 68 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
create mode 100644 drivers/tty/serial/tegra-tcu.c
--
2.16.1